Shimano FH-MX71 Bruksanvisning
Shimano
cykeltillbehör
FH-MX71
Läs nedan 📖 manual på svenska för Shimano FH-MX71 (1 sidor) i kategorin cykeltillbehör. Denna guide var användbar för 12 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/1
* If using a chain tensioner, the hub axle mount (the maximum combined width of the dropout and the chain tensioner) should be
15 mm or less.
FH-MX71
1
32 H / 36 H
5 - 10 mm *
10 mm
112 mm
Series
Brake Lever
V-BRAKE
DXR
Freehub
BL-MX70
BR-MX70
Front hub
FH-MX71
Gears
HB-MX71
Cassette sprocket
1
CS-MX66
After removing the hub axle, remove the freewheel body fixing bolt
(inside the freewheel body), and then replace the freewheel body.
Note:
Be sure to apply grease to the the thread of the freewheel body
fixing bolt, otherwise looseness or sticking may occur.
Do not attempt to disassemble the freewheel body, because it
may result in a malfunction.
Model No.
Gears
No. of spoke holes
Applicable rear dropout thickness
Applicable rear dropout demensions
Overlock nut dimensions
General Safety Information
• Check that the wheels are fastened securely before riding the bicycle. If the wheels
are loose in any way, they may come off the bicycle and serious injury may result.
• Obtain and read the service instructions carefully prior to installing the parts.
Loose, worn or damaged parts may cause the bicycle to fall over and serious
injury may occur as a result. We strongly recommend only using genuine
Shimano replacement parts.
• Read these Technical Service Instructions carefully, and keep them in a safe place
for later reference.
Note
• Use the CS-MX66 cassette sprocket.
• If the wheel becomes stiff and difficult to turn, you should lubricate it with grease.
• Do not apply any lubricant to the inside of the hub, otherwise the grease will come
out.
• You should periodically wash the sprockets in a neutral detergent and then
lubricate them again. In addition, cleaning the chain with neutral detergent and
lubricating it can be a effective way of extending the useful life of the sprockets
and the chain.
• If the chain keeps coming off the sprockets during use, replace the sprockets and
the chain.
• Parts are not guaranteed against natural wear or deterioration resulting from
normal use.
• For maximum performance we highly recommend Shimano lubricants and
maintenance products.
WARNING
In order to realize the best performance, we recommend that the following
combination be used.
Freehub
Specifications
<Chain line adjustment>
The chain line can be adjusted to between 43 and 47 mm by installing 1 mm thick spacers.
Model No.
No. of sprocket teeth
Cassette sprocket
CS-MX66
14T, 15T, 16T, 18T Please note: specifications are subject to change for improvement without notice. (English)
© Mar. 2009 by Shimano Inc. XBC SZK Printed in Japan
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
Installation of the sprocket
To install the sprocket, use the special tool (TL-LR15) to tighten
the lock ring.
Tightening torque:
30 - 50 N·m {261 - 434 in. lbs.}
To replace the sprocket, use the special tool (TL-LR15) and the
TL-SR21 to remove the lock ring.
Chain line 43 / 44 / 45 / 46 / 47 mm
43 mm
Lock ring
Lock ring spacer
Fixing bolt
Fixing bolt
Sprocket spacer
(Make sure that it faces correctly.)
Sprocket
(CS-MX66)
6 mm Allen key
Spacers (1 mm)
Hub axle
Replacement of the freewheel body
First, pull out the hub axle by following the procedure shown in the illustration.
Disassembly from the freewheel side is not possible.
(1) (2)
(3)
Note:
• When removing and installing the seal, do it very
carefully so that the seal does not become bent.
When reinstalling the seal, make sure that it is
facing the right way, and insert it as far as it will go.
• Do not disassemble the dust-proof cover which is
crimped onto the cone.
17 mm spanner
Cone with dust cover
(Cannot be disassembled)
Seal
Lip is on the outside
Left side Tightening torque:
15 - 20 N·m {132 - 172 in. lbs.}
Disassembly
Freewheel body
fixing bolt
Freewheel body
Freewheel body washer
DURA-ACE grease
(Y-04110000)
Do not disassemble the seal.
Applying grease
Tightening torque:
45 - 50 N·m {392 - 434 in. lbs.}
14 mm Allen key
Disassembly
Assembly
Lock ring
Tool
(TL-SR21)
Disassembly
TL-LR15
Fixing bolt tightening torque:
37 - 45 N·m {322 - 392 in. lbs.}
Tighten
44 mm 45 mm 46 mm 47 mm
Technical Service Instructions SI-3DW0A-001
FH-MX71 Freehub
SI-3DW0A-001-00
Produktspecifikationer
| Varumärke: | Shimano |
| Kategori: | cykeltillbehör |
| Modell: | FH-MX71 |
Behöver du hjälp?
Om du behöver hjälp med Shimano FH-MX71 ställ en fråga nedan och andra användare kommer att svara dig
cykeltillbehör Shimano Manualer
8 Oktober 2024
4 Oktober 2024
30 September 2024
24 September 2024
20 September 2024
20 September 2024
16 September 2024
14 September 2024
1 September 2024
31 Augusti 2024
cykeltillbehör Manualer
- cykeltillbehör Abus
- cykeltillbehör Silverline
- cykeltillbehör Crivit
- cykeltillbehör Thule
- cykeltillbehör SKS
- cykeltillbehör Giant
- cykeltillbehör Trelock
- cykeltillbehör Kayoba
- cykeltillbehör Powerfix
- cykeltillbehör Topeak
- cykeltillbehör Lezyne
- cykeltillbehör Prophete
- cykeltillbehör Basil
- cykeltillbehör Bobike
- cykeltillbehör Valk
- cykeltillbehör Bontrager
- cykeltillbehör Eufab
- cykeltillbehör Ergon
- cykeltillbehör MOTO
- cykeltillbehör Spokey
- cykeltillbehör Knog
- cykeltillbehör Pletscher
- cykeltillbehör Funn
- cykeltillbehör Blackburn
Nyaste cykeltillbehör Manualer
10 Oktober 2024
26 September 2024
25 September 2024
25 September 2024
24 September 2024
23 September 2024
23 September 2024
23 September 2024
22 September 2024
22 September 2024