Shure MX393 Bruksanvisning

Shure mikrofon MX393

Läs nedan 📖 manual på svenska för Shure MX393 (28 sidor) i kategorin mikrofon. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/28
Printed in U.S.A.
www.shure.com
© 201 Shure Incorporated
27A14047 (Rev. 2)
MX300 SERIES
MX392 MX393
3
Features
Flat frequency response across the vocal range
for uncolored sound
Interchangeable cartridges that provide a
choice of polar pattern for each application
Sleek, low-profile design for surface mounting
Programmable mute button
LED indicator
Logic input/output for remote control or use with
automatic mixers (MX392 models only)
RF filtering
Model Variations
MX392: Attached, unterminated cable and
programmable logic input and output.
MX393: Detachable cable with XLR output
connector.
The polar pattern of the included cartridge is indi-
cated by a model number suffix:
/C Cardioid
/S Supercardioid
/O Omnidirectional
Interchangeable Cartridges
Microflex microphones use interchangeable car-
tridges that allow you to choose the polar pattern
for different installations.
/C (R185)
/S (R184)
/O (R183)
Remove Bracket
Remove Grille
R183 Omnidirectional
R184
Supercardioid
R185 Cardioid
Permanent Installation
Microphone Placement
For best low-frequency response and rejection
of background noise, place the microphone on
a large, flat surface, such as a floor, table, or
lectern.
To reduce reverberance, avoid reflective surfaces
above or to the side of the microphone, such as
beveled sides of pulpits or overhanging shelves.
MX392 & MX393
1. Remove grille to access mounting key holes.
2. Cut slots into pads.
3. Slide microphone forward to engage screws in
slots.
If using rear side-exit cable option, only drill two
outer holes. If re-routing for cable bottom exit,
(MX392 only), drill all three holes.
MX300
Boundary
Microphones
Shure Microflex® MX300 Series microphones are
surface-mounted electret condenser microphones
designed primarily for mounting on conference ta-
bles, stage floors, and lecterns. Their high sensi-
tivity and wide frequency range make them espe-
cially suitable for picking up speech and vocals in
sound reinforcement and recording applications.
Interchangeable cartridges provide the installer
with greater flexibility and make it possible to eas-
ily reconfigure microphone coverage as the need
arises. The MX392 and MX393 models include an
internal preamplifier.
MX300 Series microphones take advantage of the
principle that, at a barrier or boundary, the sound
pressure level doubles. When placed near a suf-
ficiently large boundary surface, the microphone
has 6 dB higher sensitivity and approximately 3
dB greater direct-to-reverberant sound ratio.
Cartridge

Produktspecifikationer

Varumärke: Shure
Kategori: mikrofon
Modell: MX393

Behöver du hjälp?

Om du behöver hjälp med Shure MX393 ställ en fråga nedan och andra användare kommer att svara dig




mikrofon Shure Manualer

mikrofon Manualer

Nyaste mikrofon Manualer