Shure VP89M Bruksanvisning

Shure mikrofon VP89M

Läs nedan 📖 manual på svenska för Shure VP89M (24 sidor) i kategorin mikrofon. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/24

www.shure.com

27A15530 (Rev. 1) Printed in U.S.A.

N108

Wired Microphones

VP89L

VP89M

VP89S

VP89

Modular Shotgun Microphone

Microphone canon modulaire

Modulares Richtrohrmikrofon

Micrófono de cañón modular

Microfono shotgun modulare

Модульный линейный микрофон

モジュールショットガンマイクロホン

Modular Shotgun 마이크

模块化短枪式话筒

6 “ (15 cm)

General Description

The VP89 is a professional shotgun microphone for use in critical A/V media

production applications. Designed with interchangeable long, medium and

short capsules, the VP89 models provide scalable, superior off-axis rejection

for focus and flexibility in a wide variety of on-site locations.

Variations

The VP89 is available with long, medium, and short capsules in three model

variations: , , and .VP89L VP89M VP89S

The VP89 microphone has a tighter acceptance angle (is more directional)

when used with longer capsules, as shown in the graphic below.

Features

• Premier production microphone crafted with Shure quality, ruggedness, and

reliability

• Highly directional, uniform polar pattern optimized for distant pickup

• Modular design allows optimal performance in a wide variety of production

settings

• Designed for extremely low susceptibility to radiated and conducted hum,

GSM, and radio frequency interference (RFI)

• Superior common mode rejection

• Low self-noise and high output level

• Class A, discrete preamplifier provides transparent, extremely fast

transient response with no crossover distortion and minimal harmonic and

intermodulation distortion

• Selectable low-frequency response

• Lightweight, compact design accommodates prolonged operation,

minimizing operator fatigue attributed to many shotgun microphones

• Aircraft-grade aluminum alloy construction resists wear and abuse

• Operates over a wide range of temperatures and humidity

Changing Capsules

1. Turn off phantom power supplied to the microphone.

2. Unscrew the capsule from the preamplifier. Store the unused capsule with

its protective cap (included with the purchase of additional capsules).

3. Thread the replacement capsule to the preamp. Do not overtighten.

Note: Before each use, ensure the capsule is tightly secured to the preamp to

prevent signal loss during operation.

Wind Protection

Use the supplied windscreen to reduce wind-noise. For increased protection,

Shure offers two premium Rycote® wind protection accessories:

• Attenuates up to 25 dB of wind-noiseSoftie Windshield:

• Attenuates up to 38 dB of wind-noise while Suspension Windshield Kit:

preserving critical high frequencies; included Lyre suspension mounts

provide up to 25 dB of isolation

Suspension Mounts

Shure offers four Rycote® Softie Lyre Mounts to reduce handling noise and

low-frequency vibrations up to 15 dB:

• Secures to a standard camera shoe; for VP89S and InVision Video:

VP89M

• Fits into a standard camera clamp; for Camera Clamp Adapter (CCA):

VP89S, VP89M

• Adjustable handheld mount; for VP89S, VP89MPistol Grip:

• Secures to a boom pole; for VP89LBoom Adapter:

Note: All Softie Lyre Mounts (except InVision Video) are equipped with 3/8”

and 5/8” female threaded adapters for additional mounting options.

Double-Barrel Adapter

The Shure A89U adapter routes the preamp and cable connection beneath the

capsule, shortening the length of the microphone by up to 6” (150 mm). Use

the adapter to make a highly directional microphone in a compact form-factor.

XLR Connector Gasket

This microphone is supplied with a small corrugated rubber ring in the XLR

connector to absorb the mechanical slack between the microphone and cable.

Many high-end cables are made with a rubber shoulder on the XLR-F for the

same purpose. When connecting this microphone to a cable with a rubber

shoulder XLR-F connector, remove the corrugated rubber ring from the micro-

phone to ensure a proper fit.

Load Impedance

Maximum SPL capability, output clipping level, and dynamic range vary with

the input load impedance of the preamplifier to which the microphone is con-

nected. Shure recommends a minimum input load impedance of 1000 Ohms.

Most modern microphone preamplifiers meet this requirement. Higher imped-

ance results in better performance for these specifications.

Selecting Low-Frequency Response

A two-position switch on the preamplifier adjusts the low-frequency response.

Use the low-frequency filter to reduce room noise or proximity effect.

Normal response: Provides the most natural sound in most applications.

Low-frequency rolloff: Provides a 12 dB-per-octave rolloff below the

specified frequency for each model (see product specifications). Reduces

floor rumble and low-frequency room noise from heating and air conditioning

systems.

Compatibility

The VP89 is designed for forward and backward compatibility with Shure

SM89 shotgun microphones. Capsules and preamplifiers can interchange

seamlessly between the two models.

Power Requirements

This microphone requires phantom power and performs best with a 48 V DC

supply (IEC-61938), but it can operate with supplies as low as 11 V DC. Most

modern mixers provide phantom power and require the use of a mi-balanced

crophone cable: XLR-to-XLR or XLR-to-TRS.

Note: Information in this guide is subject to change without notice. For addi-

tional information about this product, please visit www.shure.com.

Rycote Custom Accessories

Shure offers custom Rycote

® suspension mounting and wind-protection solu-

tions designed for Shure VP shotgun microphones.

XLR-F

rubber

shoulder

corrugated

rubber ring

MICROPHONE

Produktspecifikationer

Varumärke:	Shure
Kategori:	mikrofon
Modell:	VP89M

Behöver du hjälp?

Om du behöver hjälp med Shure VP89M ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

mikrofon Shure Manualer

Shure VP89M Bruksanvisning

30 December 2025

Shure PGA DRUMKIT4 Bruksanvisning

30 December 2025

Shure PGA DRUMKIT6 Bruksanvisning

30 December 2025

Shure Microflex MX395 Bruksanvisning

30 December 2025

Shure KSM11 Bruksanvisning

30 December 2025

Shure MoveMic Bruksanvisning

30 December 2025

Shure SBC210LM Bruksanvisning

26 Oktober 2024

Shure MXA901-R Bruksanvisning

25 September 2024

Shure SBC-DC-903 Bruksanvisning

23 September 2024

Shure AXT910 Bruksanvisning

22 September 2024

mikrofon Manualer

Nyaste mikrofon Manualer

Vonyx CMS320B Bruksanvisning

16 Januari 2025

Karma SET 6252A Bruksanvisning

16 Januari 2025

DJI Mic Mini Bruksanvisning

15 Januari 2025

Sound Devices Astral A20-HH Bruksanvisning

14 Januari 2025

HyperX QuadCast S Bruksanvisning

8 Januari 2025

Monacor ECM-306BU/SW Bruksanvisning

8 Januari 2025

Schertler STAT-C Bruksanvisning

7 Januari 2025

Godox Cube-C Bruksanvisning

7 Januari 2025

Audibax AWM 401 TD Bruksanvisning

6 Januari 2025

Audibax Sidney 1250 A Bruksanvisning

6 Januari 2025