Siemon VP-BLNK Bruksanvisning

Läs nedan 📖 manual på svenska för Siemon VP-BLNK (1 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
To assist safe installations, comply with the following:
A. Use caution when installing or modifying
telecommunications circuits.
B. Never touch uninsulated wire terminals unless
the circuit has been disconnected.
C. Never install this device in a wet location.
D. Never install wiring during a lightning storm.
VPOD Blank Panel Installation Instructions
Parts Description Required Tools
Rev. A 10/08 100.17753.00
To assist safe installations, comply with the following:
A. Use caution when installing or modifying
telecommunications circuits.
B. Never touch uninsulated wire terminals unless
the circuit has been disconnected.
C. Never install this device in a wet location.
D. Never install wiring during a lightning storm.
Make sure both cabinets
that the Blank will be
installed between, are level and
properly bayed together using all
(4) baying brackets. See Baying
Instructions.
1Install the (4) shoulder
bolts provided onto the
inside of the VPOD Frame as
shown, using the 5/32” Allen Tool.
(2) bolts on the top and (2) bolts
on the bottom.
2Place the Blank over the (4)
shoulder bolts and hook
the back plate into place.
3
© 2008 Siemon
Global Headquarters
Watertown, Connecticut USA
Tel: (1) 866-548-5814
For a complete listing of our global offices visit our web site www.siemon.com
5/32 Allen Tool
VPOD Vertical Blank Panel
(4) Shoulder Bolts

Produktspecifikationer

Varumärke: Siemon
Kategori: Inte kategoriserad
Modell: VP-BLNK

Behöver du hjälp?

Om du behöver hjälp med Siemon VP-BLNK ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Siemon Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer