Signature SKSSB4202S Bruksanvisning

Signature kylskåp SKSSB4202S

Läs nedan 📖 manual på svenska för Signature SKSSB4202S (13 sidor) i kategorin kylskåp. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/13
Installation Guide
BUILT-IN SXS REFRIGERATOR
SKSSB4202S
ENGLISH FRANÇAIS ESPAÑOL
Copyright © 2022 Signature Kitchen Suite. All Rights Reserved.
www.signaturekitchensuite.com
MFL67410837_Rev.02
2
Contents
1. Precaution before installation 3 ..................................................................
2. Product and Cutout dimension 4 ................................................................
3. Precaution when moving the product 5 ......................................................
4. Cabinet diagram and maximum door opening 6 .........................................
5. Refrigerator/Freezer door opening and how to fix at 90 degrees 7 ...............
6. Installation of part to prevent the product from falling over 7 ......................
7. Connecting power and securing space for water supply pipe 9 ...................
8. How to install the water supply pipe 10 .....................................................
9. Product detail dimension 11 .......................................................................
10. Cabinet detail dimension 12 .....................................................................
11. How to adjust the height of the refrigerator and freezer door 14 ...............
12. How to adjust the height of the product 15 ...............................................
13. How to disassemble/reassemble the top grill 16 .......................................
14. Left/Right door adjuster for refrigerator and freezer 17 .............................
3
ENGLISH
Precaution
Install the product away from the heat of the heater, boiler or direct sunlight.
Install the product where air flows well and is well ventilated.
Refer to the dimension of the cabinet and prepare the cabinet with good air circulation.
Install the product so that air flows smoothly through the front air inlet. If the air circulation
structure is not ensured, it may interfere with the normal operation of the product.
Because the damage to the power cord from external animals (Rodents) can cause a fire,
install the product where there is no access from external animals.
If the cabinet is made of soft material (Ex: Plaster etc.), it can have week assembly force
or even can be damaged. Therefore use the cabinet made of firm strong material.
Use cabinet without any twisting from the heat emitted from the product or humidity from
the opening and closing of the refrigerator.
Install the product where it is leveled horizontally and vertically. (Within 1mm horizontally
and vertically) If the product is not leveled horizontally and vertically, it can be difficult to
install the product. (The cabinet must be made of material or must be in the structure not
to cause continuous deformation when 220.5 lb(100kg) of load is applied.)
Install the built-in refrigerator with a team of 2 people.
When installing the product, protect the children from the use of parts and installation
location.
During the installation, take out the screw from the plastic bag one by one to avoid any
injury from exposed parts.
Avoid the use of multi-tab as it can cause a fire.
Before installing the product, connect the product to make sure to check it is operating
normally.
WARNING
TIP-OVER HAZARD
Use two or more people to move and install the refrigerator.
To prevent the refrigerator from tipping over, install anti-tip brackets
(provided). Failure to follow the refrigerator installation instructions
can result in serious injury or death.
1. Precaution before installation

Produktspecifikationer

Varumärke: Signature
Kategori: kylskåp
Modell: SKSSB4202S

Behöver du hjälp?

Om du behöver hjälp med Signature SKSSB4202S ställ en fråga nedan och andra användare kommer att svara dig




kylskåp Signature Manualer

kylskåp Manualer

Nyaste kylskåp Manualer