Silva Exceed 4XT Bruksanvisning

Silva Lampa Exceed 4XT

Läs nedan 📖 manual på svenska för Silva Exceed 4XT (13 sidor) i kategorin Lampa. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/13
CHOOSE YOUR LANGUAGE:
FULL VERSION MANUAL
EXCEED 4XT Art. no 37984
y g y p y y p p
damage or cause any type of weakness to the plastic in your helmet.
To mount the helmet bracket, remove the protective film covering the adhesive tape. Make
sure the surface of the helmet is clean and dry. Press the bracket onto its correct position.
If you do not want to use the adhesive on your helmet the attachment is prepared for mount-
ing with 2 or more straps on the sides. (Not included)
Attach the headlamp in the helmet bracket by sliding the headlamp bracket into the snap-in
socket. To remove, slide the headlamp up and out of the bracket.
Attach the cable by using the back cable guide or integrated helmet strap.
Depending on helmet type, it might be preferable to use the Helmet mode – Flow light deac-
tivated, when the headlamp is used on a helmet.
The headband is designed to fit on a helmet – thus giving you the flexibility to use either
the included helmet bracket or to just snap the headlamp onto your helmet and go.y type of
weakness to the plastic in your helmet.
tery energy remains. This is done by flashing both LEDs for 1 second.
RESERVE MODE
During operation, the lamp will go into reserve mode when there is 10% power left of the bat-
tery. All LEDs will flash before the lamp goes into this mode.
Reserve mode can be overridden by pressing the button.
Warning: If you have pressed the button when headlamp is in reserve mode no more low bat-
tery warnings will appear before the headlamp turns OFF.
BATTERY STATUS INDICATION
When battery is connected and the headlamp is switched on - the current battery status will
automatically be visible for 30 seconds. To check battery status during use, the headlamp
has to be switched OFF and then back ON again.
• 5 green LEDs = Fully charged
• 4 green LEDs = 80% of the battery remains
• 3 green LEDs = 60% of the battery remains
• 2 green LEDs = 40% of the battery remains
• 1 red LED = 20% of the battery remains
To get as much power as possible out from your battery, keep it away from low temperatures
during use.
Visit: www.silva/environment
for more information about the
Waste Electrical and Electronic
Equipment (WEEE) Directive.
Visit: www.silva/environment
for more information about the
Waste Electrical and Electronic
Equipment (WEEE) Directive.

Produktspecifikationer

Varumärke: Silva
Kategori: Lampa
Modell: Exceed 4XT

Behöver du hjälp?

Om du behöver hjälp med Silva Exceed 4XT ställ en fråga nedan och andra användare kommer att svara dig


Lampa Silva Manualer

Silva

Silva Trail Runner ll USB Bruksanvisning

31 December 2025
Silva

Silva Trail Runner Free H Bruksanvisning

19 September 2024
Silva

Silva Trail Speed 5X Bruksanvisning

19 September 2024
Silva

Silva Cross Trail 5 Bruksanvisning

19 September 2024
Silva

Silva Trail Runner Free Bruksanvisning

19 September 2024
Silva

Silva Free 2000 M Bruksanvisning

19 September 2024
Silva

Silva Free 1200 M Bruksanvisning

19 September 2024
Silva

Silva Trail Runner Free Ultra Bruksanvisning

19 September 2024
Silva

Silva Trail Speed 5R Bruksanvisning

19 September 2024
Silva

Silva Free 1200 Bruksanvisning

19 September 2024

Lampa Manualer

Nyaste Lampa Manualer

Philips

Philips InfraPhil HP3616 Bruksanvisning

13 Januari 2025
Godox

Godox RS60Bi Bruksanvisning

9 Januari 2025
V-Tac

V-Tac VT-3610 Bruksanvisning

8 Januari 2025
V-Tac

V-Tac VT-3612 Bruksanvisning

8 Januari 2025
V-Tac

V-Tac VT-3621 Bruksanvisning

8 Januari 2025
Powerplus

Powerplus POWPB80500 Bruksanvisning

7 Januari 2025
Powerplus

Powerplus POWX0090LI Bruksanvisning

7 Januari 2025
V-Tac

V-Tac VT-91100 Bruksanvisning

7 Januari 2025
V-Tac

V-Tac VT-3620 Bruksanvisning

7 Januari 2025
V-Tac

V-Tac VT-3614 Bruksanvisning

7 Januari 2025