Skytec SPL500EQ Bruksanvisning

Skytec mottagare SPL500EQ

Läs nedan 📖 manual på svenska för Skytec SPL500EQ (10 sidor) i kategorin mottagare. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/10

STEREO POWER AMPLIFIER WITH EQ

SPL5 00EQ

SPL700EQ

SPL1000EQ

SPL1500EQ

SPL2000EQ

Instruction Manual

Gebruiksaanwijzing

Mode d’Emploi

Gebrauchsanleitung

Manual de instrucciones

SPL–EQ SERIES - 3 -

Congratulations to the purchase of our SPL Amplier.

Read the instructions thoroughly prior to using the unit.

SAFETY INSTRUCTIONS

• Hearing damage:

Loudspeakers are easily generating high sound

pressure levels (SPL) sucient to cause permanent

hearing damage to performers, production crew and

audience members. Care should be taken to avoid

prolonged exposure to SPL in excess of 85 dB.

• Make sure that the amplier is switched o when the

speaker box is connected or disconnected.

• Do not overload the amplier or speakers to avoid

damage to the components.

• Do not plug or unplug the unit with wet hands.

• If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

• Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

• During a thunderstorm or if the unit will not be used for

a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

• If the unit has not been used for a longer period of

time, condensation may occur. Let the unit reach

room temperature before you switch it on. Never use

the unit in humid rooms or outdoors.

• During operation, the housing becomes very hot. Do

not touch it during operation and immediately after.

• Do not use cleaning sprays to clean the switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice

from a specialist.

• Do not force the controls.

• Do not place an open re (candle, etc.) on top or next

to the box - FIRE HAZARD

• Make sure that the amplier is placed on a stable,

solid surface.

• Do not place liquids on the amplier and protect it

against humidity. Humidity can shorten the life time

considerably.

• If the unit is damaged to an extent that internal

parts are visible, DO NOT connect the unit and DO

NOT switch it on. Contact your dealer.

• Never try to repair the unit yourself. It does not

contain any user serviceable parts. All repairs must

be carried out by a qualied technician.

• Set the amplier to the lowest volume prior to

switching it on.

• Keep the unit out of the reach of children.

• Switch the unit o prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the unit.

• Make sure that the mains lead cannot be damaged

when people walk on it. Check the mains lead

before every use for damages and faults!

Protect your environment. Recycle packing

material whenever possible.

Do not throw a faulty unit into normal household

waste but bring it to a special collection

point. A large part of it can be recycled.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit.

This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by

inappropriate use or disrespect of the warnings contained in this manual. SkyTronic cannot be held responsible for

personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all

damages in whatever form.

CONNECTIONS

First of all, check the specications of the amplier if it is suitable for your speaker boxes. Pay particular attention

to the power rating and impedance. Check if the amplier is switched o. If yes, you can switch on the speakers.

PLEASE NOTE! Watch the polarity (+/-). Wires of the same colour must be connected to the same sign of every

side i.e. the + of the amplier must be connected to the + of the speaker box. If the connections are inverted, the

sound quality will diminish. Only use high quality speaker cables that are suitable for the power and distance

between the amplier and the speaker.

LAYOUT:

Front Panel

1. Power switch

2. Power on/o indicator

3. han C nel A & B volume

control

4. Signal LED Channel A & B

5. Clip indicator

6. 3-Bands EQ

7. Input selector

8. MP3 Input

SPL–EQ SERIES - 6 -

AANSLUITINGEN

Houd bij het aansluiten van luidsprekers op deze versterker rekening met de impedantie (min. 4 Ohm) en het

maximaal vermogen. Denk aan de polariteit (+/-) en gebruik alleen kwaliteitskabel. Zorg er altijd voor dat er geen

overbelasting optreedt en dat de clip indicatoren (5) niet branden.

VOORZIJDE

1. Netschakelaar

2. Aan / Uit indicator

3. Kanaal A & B volume regelaar

4. Signaal LED Kanaal A & B

5. Clip indicator

6. 3-Kanaals EQ

7. Ingang keuze schakelaar

8. MP3 (3.5mm jack) ingang

ACHTERZIJDE

1. Ingangen A & B ( RCA aansluitingen)

2. Uitgangen A&B

3. Netentree incl. zekeringhouder

4. Ventilator (vanaf SPL700EQ)

Produktspecifikationer

Varumärke:	Skytec
Kategori:	mottagare
Modell:	SPL500EQ
Vikt:	1450 g
Bredd:	110 mm
Djup:	270 mm
Höjd:	30 mm
Nuvarande:	4 A
Maximal upplösning:	3840 x 2160 Pixels
HDCP:	Ja
Maximal uppdateringshastighet:	60 Hz
HD typ:	4K Ultra HD
HDMI-version:	1.4
Färgdjup:	12 Bit
Förvaringstemperatur:	-20 - 60 °C
HDCP-version:	1.3
Video av:	8x HDMI
Videoanslutning:	HDMI
AC-ingångsspänning:	5 V
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	0 - 90 procent
Antal videoportar:	8
Dolby-teknik:	DTS-HD Master Audio, Dolby TrueHD