Snom A190 Bruksanvisning

Snom Headset A190

Läs nedan 📖 manual på svenska för Snom A190 (4 sidor) i kategorin Headset. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
1
Quick Start Guide
A190 Wireless DECT Headset
v2019001
ADelivery content · Lieferumfang ·
Contenu de la boîte · En la caja · Contenuto della confezione
Quick
Start Guide
A190
10 hrs
Charging the battery
·
Akku laden
·
Charger la batterie
·
Ricarica della batteria
·
Carga de la batería
C
Connecting
·
Anschließen
·
Connecter
·
Conectar
·
Collegare
B
Features
·
Caractéristiques
·
Caratteristiche
· Características
D
LED
AUX key (power ON)
·
AUX-Taste ·
Bouton AUX ·
PulsanteAUX ·
Botón AUX
MUTE microphone
·
Mik rofon stummschalten ·
Dés activer le microphone ·
Disattivare microfono ·
Desactivar micrófono
VOLUME-
Lautstärke
-
Volumen-
Loudspeaker in back
Lautsprecher hinten
Haut-parleur à l'arrière
Altoparlante nella parte posteriore
Altavoz en la parte posterior
Microphone
·
Mik rofon ·
Microphone ·
Microfono ·
Micrófono
Registering the headset to M-series base stations
1. Set up an extension for the headset on the base station and put the base station into registration
mode for handsets. Please refer to the base station manual on how to do it. The headset's IPEI
number is on the box label.
Note: To be able to register a headset, you must set the AC code on the M900 Extensions
page to 0000.
2. Press the CALL key and the two VOLUME keys simultaneously for more than 5 seconds to put the
headset into registration mode, as indicated by short blue flashes and the voice prompt announcing
"registering."
3. If the headset has been registered, the voice prompt announces "heaset subscribed," and the
headset has been added to the extensions page (Fig. 1). It can now receive calls at the assigned
extension number.
Fig. 1
2
CALL key ·
Anr uftaste ·
Bouton d'appel ·
Pulsante di chiamata ·
Botón de llamada
VOLUME-
Lautstärke
+
Volumen+
3
Pairing the headset with a handset
It is possible to pair the headset with a handset registered at the base station. The headset will get the
same extension number as the handset, and you can assign its former extension number to another
terminal.
1. On the extension page, click on the IPEI of the handset. The handset page opens.
2. From the drop-down box of Paired Terminal, select the terminal idx of the headset (Fig. 2).
Fig. 2
3. Click Save. The headset is now registered with the same extension number as the handset and can
also be used to call numbers dialed on the handset's keypad.
Fig. 3
Using the headset
Turning headset on: press AUX and both VOLUME keys for 5 seconds or place
handset in charger.
• Turning headset o: press AUX and both VOLUME keys for 5 seconds.
Idle state
• Increase ringer volume: press VOLUME+ key .
• Decrease ringer volume: press VOLUME- key .
• Disable ringer audio (turn on silent mode): press VOLUME+ key for 2 seconds .
• Enable ringer audio (turn o silent mode): press VOLUME- key for 2 seconds .
• Enter voice prompt menu: press AUX key .
Active state
Ringing calls can be accepted on the handset or on the headset and then picked up on the other device.
• Accept/terminate call: press CALL key (1x) .
• Reject incoming call: press CALL key twice (2x) .
• Put call on hold/retrieve held call: press CALL key for 2 seconds .

Produktspecifikationer

Varumärke: Snom
Kategori: Headset
Modell: A190

Behöver du hjälp?

Om du behöver hjälp med Snom A190 ställ en fråga nedan och andra användare kommer att svara dig




Headset Snom Manualer

Snom

Snom A330M Bruksanvisning

1 September 2024
Snom

Snom A150 Bruksanvisning

29 Augusti 2024
Snom

Snom A190 Bruksanvisning

27 Augusti 2024
Snom

Snom A100M Bruksanvisning

26 Augusti 2024
Snom

Snom A330D Bruksanvisning

25 Augusti 2024
Snom

Snom A170 Bruksanvisning

25 Augusti 2024

Headset Manualer

Nyaste Headset Manualer