Sony BRU-SF10 Bruksanvisning

Läs nedan 📖 manual på svenska för Sony BRU-SF10 (40 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/40
HD Optical
Multiplex Unit
BRU-SF10
4-195-081-12 (1)
© 2010 Sony Corporation
Operating Instructions _____ GB
Mode d’emploi____________ FR
Manual de instrucciones ___ ES
GB 2
Owner’s Record
The model and serial numbers are located on the top.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your
Sony dealer regarding this product.
Model No. BRU-SF10
Serial No.
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
WARNING
When installing the unit, incorporate a readily
accessible disconnect device in the fixed wiring, or
connect the power plug to an easily accessible socket-
outlet near the unit. If a fault should occur during
operation of the unit, operate the disconnect device to
switch the power supply off, or disconnect the power
plug.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
This BRU-SF10 is classified as a CLASS 1 LASER
PRODUCT.
Laser Diode Properties
Wavelength : 1310 nm
Emission duration : Continuous
Laser output power : 300 μW (Typical)
Standard : IEC60825-1 (2001)
CAUTION
The use of optical instruments with this product will
increase eye hazard.
For the customers in the U.S.A.
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
All interface cables used to connect peripherals must be
shielded in order to comply with the limits for a digital
device pursuant to Subpart B of Part 15 of FCC Rules.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
For the customers in Canada
This Class A digital apparatus complies with Canadian
ICES-003.
For the customers in Europe, Australia and
New Zealand
WARNING
This is a Class A product. In a domestic environment,
this product may cause radio interference in which case
the user may be required to take adequate measures.
In the case that interference should occur, consult your
nearest authorized Sony service facility.
For the customers in Europe
The manufacturer of this product is Sony Corporation,
1-7-1 Konan, Minato-ku, Tokyo, Japan.
The Authorized Representative for EMC and product
safety is Sony Deutschland GmbH, Hedelfinger Strasse
61, 70327 Stuttgart, Germany. For any service or
guarantee matters please refer to the addresses given in
separate service or guarantee documents.
This apparatus shall not be used in the residential area.
WARNING
Table of Contents 3 GB
GB
Table of Contents
Features .................................................................. 4
Connecting Cables .............................................. 4
Example of System Configuration ..................... 4
Location and Function of Parts ............................ 5
Attaching an Interface Card ................................ 8
Connecting the AC Adapter ................................. 8
Precautions ............................................................. 9
Specifications ........................................................ 10
Dimensions ....................................................... 11
Pin Assignments ............................................... 11
Using the VISCA RS-422 Connector Plug ...... 12

Produktspecifikationer

Varumärke: Sony
Kategori: Inte kategoriserad
Modell: BRU-SF10

Behöver du hjälp?

Om du behöver hjälp med Sony BRU-SF10 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Sony Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer