Sound Devices A20-Opto Bruksanvisning

Sound Devices Inte kategoriserad A20-Opto

Läs nedan 📖 manual på svenska för Sound Devices A20-Opto (13 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/13
ASTRAL®
A20-Opto
Installation Instructions
Table of Contents
A20-Opto for A20-SuperNexus 3
Parts Included for Installation 3
Installation 4
Warranty 12
Legal Notices 13
A20-Opto User Guide 2
A20-Opto for A20-SuperNexus
The A20-Opto is an optional expansion box for the SuperNexus that adds Optocore, MADI, AES, and analog outputs plus GPIO
A20-
functionality. The A20-Opto comes in two versions, the A20-Opto-HMA and A20-Opto-ST. The only difference between the
A20-Opto-HMA and A20-Opto-ST is the connector type used for the Optocore audio outputs, HMA or ST respectively. Photos in this
guide are for the A20-Opto-HMA, but installation of an A20-Opto-ST is identical
The A20-Opto connects to the SuperNexus via a multi-pin connector located on the bottom of SuperNexus. Optocore
A20- A20-
output channels carry audio outs 1-64. The A20-Opto has 2x MADI outputs on 2x BNC connectors. At 48k, both MADI Outputs are
hardwired to audio outs 1-64. At 96k, MADI Out 1 carries 1-32 and MADI Out 2 carries 33-64.For 96 kHz applications, the MADI
outputs can be configured as Hi-Speed or SMUX 96k MADI format. The 32-channel Analog and AES digital (AES72 Type 1M)
Outputs are configured as a redundant set of outputs that are fed from the same sources routed to the analog and digital outputs on
the SuperNexus.
A20-
When connected to an A20-SuperNexus:
● Power is shared between both units. Either is capable of powering the entire assembly. Both can be connected to power
for redundancy.
● Control of the A20-Opto is from the A20-SuperNexus menus. Go to Audio -> A20-Opto Setup.
● Firmware versions on both must match and the firmware update is performed on the A20-SuperNexus
○ It’s best practice to update the A20-SuperNexus firmware after the A20-Opto is connected to ensure the
firmware is in sync.
See the A20-SuperNexus User Guide for complete operational instructions.
Parts Included for Installation
● 1.5 mm hex wrench
● 2.5 mm hex wrench
● Bridge board assembly
● Double rack ear assembly (rack ears, rear mounting bracket, 16 screws)
A20-Opto User Guide 3

Produktspecifikationer

Varumärke: Sound Devices
Kategori: Inte kategoriserad
Modell: A20-Opto

Behöver du hjälp?

Om du behöver hjälp med Sound Devices A20-Opto ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Sound Devices Manualer

Sound Devices

Sound Devices A20-Opto Bruksanvisning

12 Januari 2025
Sound Devices

Sound Devices A20-TX Bruksanvisning

14 September 2024
Sound Devices

Sound Devices Wave Agent Bruksanvisning

13 September 2024
Sound Devices

Sound Devices A20-Mini Bruksanvisning

13 September 2024
Sound Devices

Sound Devices SL-2 Bruksanvisning

13 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Metra

Metra 82-8602 Bruksanvisning

14 Januari 2025
Metra

Metra 99-8274 Bruksanvisning

14 Januari 2025
On-Stage

On-Stage RKD9000 Bruksanvisning

14 Januari 2025
QSC

QSC E110 YM Bruksanvisning

14 Januari 2025
On-Stage

On-Stage RKD6000 Bruksanvisning

14 Januari 2025
QSC

QSC E12 YM Bruksanvisning

14 Januari 2025
On-Stage

On-Stage RKD1200 Bruksanvisning

14 Januari 2025
Bestron

Bestron ABH401B Bruksanvisning

14 Januari 2025
Bestron

Bestron ASM90XL Bruksanvisning

14 Januari 2025
Bestron

Bestron KHP300BL Bruksanvisning

14 Januari 2025