Soundstream VR-64HBL Bruksanvisning

Soundstream Inte kategoriserad VR-64HBL

Läs nedan 📖 manual på svenska för Soundstream VR-64HBL (23 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/23
2-Din DVD Headunit
Owner’s Manual
VR-64HBL
EN
2 MonitorDIN 6.2''
Touch screen
DVD/CD/MP3/MP4/USB/SD
AM/FM Radio
Support Android Phone Link
Support Bluetooth
•
Thank you for using our company multi-media
player! To operate the unit correctly, please
read the operation manual carefully before
using. Keep this operation manual for further
reference.The unit is designed only fo r DC 12V
negative ground operation system. Make sure
your vehicle is connected to DC 12V negative
ground electrical system. Do not connect it to
24V power supply in trucks or buses, or else it
will be damaged. Be sure to connect the
speaker (-) leads to the speaker (-) terminal.
Never connect the left and right channel speaker
wires together or to the vehicle body. The normal
temperature for operation is between -20 and
+60 degree Celsius. Do not work in extreme
high or low temperature and block vents or
radiator panels of the unit, blocking them will
cause heat to build up inside the unit and may
cause damage or fire.
Do not put the device in a moist environment or
water to avoid electric shock, damage and/or fire
due to a short circuit.
This unit can play the following discs (12 cm) and
media files: DVD±R/RW / WMV / VCD / MP3 /WMA
/ CD-R/RW / JPEG. Please use genuine discs instead
of incompatible discs, or it will damage the device
and/or shorten the service life.
Protecting the monitor
• To protect the monitor from damage, do not
operate the monitor using a ballpoint pen or
similar tool with the sharp tip.
•
•
•
Before use
Before use
Cleaning the unit
Caution 3
How to reset the unit 3
Protecting the monitor 2
3
Important notice & precaution 2
Basics
Installation
Trouble Shooting 22
Specication 21
Panel Description 6
Remote Control 6
Operation
Main menu 9
Audio & Video setting 9
Settings menu 10
Radio operation 15
Disc/USB/SD operation 15
Bluetooth operation 17
APP operation 18
AUX IN operation 18
F-Camera operation 19
Phonelink operation 19
Installation 4
Wiring 5
Speaker Connection 4
Parking wiring 4
IMPORTANT NOTICE & PRECAUTIONS
Contents
22
Installation
1. Make sure the ignition i s turned off, and
disconnect the cable from the vehicle battery’s
negative (-) terminal.
You never want electricity running while you
install this 2-DIN car receiver.
2. Before installation, disconnect the wire harness
and the antenna.
3. Attach the brackets on the both sides of the car
receiver with screws as shown as the above figure.
4. Consult with your nearest dealer if installation
requires the drilling of holes or other modification of
the vehicle.
5. Install the car receiver in the dashboard.
6. Connect the wire harness & antenna to the car
receiver being carefully not to pinch any wires or
cables.
7. Install the plastic outer trim ring onto the car
receiver.
8. Reconnect the battery and run through all of the
options on this car receiver to ensure that everything
is working correctly.
9. Particulars will vary widely depending upon the
kind of your car and the car you intend to install it in.
Please choose the correct installation method
according to the actual situation of your car. Always
contact the car dealer or manufacturer if you have
any questions.
Note: The parking wire is connected with brake
signal; for safety, the programs can be seen on
the monitor after braking the car.
Connecting the revising line to taillight on the
car.
After connection, when you start up the reverse
gear, the unit will receive the picture from car
rear view camera.
Parking Wire
Speaker connection
1. Only use groudless loudspeakers
2 Use only loudspeakers of munimum 40 Watt,
using fewer watts may result in damaging
your loudspeakers at higher volumes.
3.Use 4-8 ohm impendace loudspeakers only,
suing higher or lesser inpendance may
damage the unit.
4.Do not use 3-cable loudspeakers and do not
connect the loudspeakers mumis to the car.
The unit is using a BTL circuit and eachloud-
speaker must be connected
with insulated cables according the diagram.
5. Loudspeaker cables and/or optional external
power amplifiers must always be about 30 cm
away from the antenna and/or antenna
extension parts.
Connect the speakers accordind the following
diagram,incorrect connections will damage
the unit or your loudspeakers.
Installation
4

Produktspecifikationer

Varumärke: Soundstream
Kategori: Inte kategoriserad
Modell: VR-64HBL

Behöver du hjälp?

Om du behöver hjälp med Soundstream VR-64HBL ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Soundstream Manualer

Soundstream

Soundstream VCD-21B Bruksanvisning

26 September 2024
Soundstream

Soundstream VCD-22B Bruksanvisning

26 September 2024
Soundstream

Soundstream VR-64HBL Bruksanvisning

26 September 2024
Soundstream

Soundstream VRN-624B Bruksanvisning

26 September 2024
Soundstream

Soundstream VRN-DD7HB Bruksanvisning

26 September 2024
Soundstream

Soundstream VM-21B Bruksanvisning

26 September 2024
Soundstream

Soundstream VRN-65HB Bruksanvisning

26 September 2024
Soundstream

Soundstream VM-430HB Bruksanvisning

26 September 2024
Soundstream

Soundstream VM-22B Bruksanvisning

26 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024