SSV Works BR-DS10U Bruksanvisning

SSV Works Inte kategoriserad BR-DS10U

Läs nedan 📖 manual på svenska för SSV Works BR-DS10U (5 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/5
BR-DS10U
2021-Up Ford Bronco
Subwoofer Enclosure, 10” - Unloaded
!
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in material or
workmanship. All SSV Works Electronics are covered by a limited 1 year warranty against defects in
material or workmanship. All SSV Works Speakers are covered by a limited 1 year warranty against
defects in material or workmanship. Labor for replacement of defective components is not covered.
Contact SSV Works for further warranty information.
BRONCO SUB WOOFER ENCLOSURE PARTS LIST
PARTS LIST IMAGES
Body Bracket, 4-Door, Soft Top
[B-MB3145]
Bronco Sub Enclosure
Lower Housing Bracket
[B-MB3142]
Body Bracket, 4-Door, Hard
Top [B-MB3144]
Upper Housing Bracket
[B-MB3141]
TOOLS NEEDED FOR INSTALLATION - T30 Torx Wrench
BRONCO SUBWOOFER ENCLOSURE ASSEMBLY
A. Attach the upper and lower housing brackets to the subwoofer
enclosure using (10) M6x1x16mm screws and washers.
2
- Phillips Screw Driver
B. Install the subwoofer and grill using (18) #7x1.25” screws included
in the kit. Note that the subwoofer enclosure is mounted in the
vehicle vertically. Align the subwoofer and grill logo accordingly.
BA
Hardware Pack
[B-HP3146]
Spacer [B-MB3143]
Hardware Pack, #7x1.25” (x8)
[B-HP#7-8]
3
A B
A. Working at the driver side cargo space, remove the plastic panel under
the window. Plastic panel will not be used and should be set aside.
B. The plastic panel is held in place by (4) clips.
C
C. Install the body bracket to the factory weld nuts using the (2) M8x1.25x20 button head screws and washers included in kit. The Bronco sub kit
includes a body bracket for hard top and soft top models. See C1 & C2 for bracket differentiation.
TOOLS NEEDED FOR INSTALLATION - 5mm Hex Driver
BRONCO SUBWOOFER ENCLOSURE INSTALLATION
- 13mm &15mm Socket Wrench
D
D. Remove the factory driver side tie down anchor using a 12mm
socket wrench.
C2
C1
E
E. Line up the spacer (B-MB3143) to the factory threads.
Soft Top
Hard Top

Produktspecifikationer

Varumärke: SSV Works
Kategori: Inte kategoriserad
Modell: BR-DS10U

Behöver du hjälp?

Om du behöver hjälp med SSV Works BR-DS10U ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad SSV Works Manualer

SSV Works

SSV Works BR-DS10U Bruksanvisning

2 Januari 2025
SSV Works

SSV Works RZ4-2KRC Bruksanvisning

12 September 2024
SSV Works

SSV Works RZ3-DM3 Bruksanvisning

12 September 2024
SSV Works

SSV Works WP3-RZOA Bruksanvisning

12 September 2024
SSV Works

SSV Works GN-5A Bruksanvisning

12 September 2024
SSV Works

SSV Works CM-DM3 Bruksanvisning

12 September 2024
SSV Works

SSV Works RZ3-3A Bruksanvisning

12 September 2024
SSV Works

SSV Works RG4-5KRC Bruksanvisning

12 September 2024
SSV Works

SSV Works RG4-DM3 Bruksanvisning

12 September 2024
SSV Works

SSV Works X3-DM3 Bruksanvisning

12 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 55PUS6551 Bruksanvisning

16 Januari 2025
Philips

Philips 32PHS4504 Bruksanvisning

16 Januari 2025
Electrolux

Electrolux RH36WC40GS Bruksanvisning

16 Januari 2025
Rocstor

Rocstor SolidKVM SK05 Bruksanvisning

16 Januari 2025
Carlsbro

Carlsbro CSD25M Bruksanvisning

16 Januari 2025
Carlsbro

Carlsbro CSD45M Bruksanvisning

16 Januari 2025
Carlsbro

Carlsbro CSD35M Bruksanvisning

16 Januari 2025
On-Q

On-Q EN2050 Bruksanvisning

16 Januari 2025
On-Q

On-Q EN1420 Bruksanvisning

16 Januari 2025
Chief

Chief Kontour KRA300B Bruksanvisning

16 Januari 2025