Stabila TECH 500 DP Bruksanvisning

Stabila Mätutrustning TECH 500 DP

Läs nedan 📖 manual på svenska för Stabila TECH 500 DP (19 sidor) i kategorin Mätutrustning. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/19
How true pro’s
TECH 500 DP
User manual
TECH 500 DP
2
en
Contents
Section Page
1 Intended use 3
2 Safety information 3
3. Components of the unit 4
4. Display elements 5
5. Commissioning 6
5.1 Inserting batteries/battery replacement 6
5.2 Switching the unit on 6
6. Functions 7
6.1 Visual guidance 7
6.2 Acoustic guidance 8
6.3 Automatic display inversion 8
6.4 Setting the MODE unit of measurement 9
6.5 Locking the measurement with HOLD 9
6.6 Freely selectable zero position REF 10
6.7 Lighting 11
6.8 Key lock 11
6.9 Automatic switch-otime: Auto OFF 11
7. Checking the measuring tool 12
7.1 Accuracy check 12
7.2 Calibration 13
7.3 Adjusting the sensor 14
7.4 Error messages 17
8. Technical data 18
TECH 500 DP
3
en
1. Intended use
Congratulations on the purchase of your STABILA
measuring tool. The STABILA TECH 500 DP is a digital
measuring tool for measuring inclinations.
If you still have questions aer reading through
the operating instructions, you can obtain advice
by telephone:
+49 63 46 3 09 0
Equipment and functions:
Tough, independent digital protractor for quick and accu-
rate measurements
Integrated rare-earth magnet for attachment
Integrated V-groove for aligning on round surfaces
Integrated T-groove for attachment
Batteries for operation
Carrying case
2. Safety information
Read the safety instructions and operating instructions
through carefully.
Keep these operating instructions in a safe place and
include them when passing the measuring tool on to
another person.
Do not dispose of the unit with domestic waste.
Please observe the relevant national laws.
Allow only qualified persons to operate the unit.
Keep the unit out of the reach of children.
Do not use in explosive or corrosive environments.
Do not immerse the unit in water.
If the unit is dropped or subjected to strong vibrations
it may malfunction.
Check that the unit is functioning correctly and
accurately at regular intervals, particularly if it
has been exposed to heavy vibrations.
Do not open the unit.

Produktspecifikationer

Varumärke: Stabila
Kategori: Mätutrustning
Modell: TECH 500 DP

Behöver du hjälp?

Om du behöver hjälp med Stabila TECH 500 DP ställ en fråga nedan och andra användare kommer att svara dig




Mätutrustning Stabila Manualer

Mätutrustning Manualer

Nyaste Mätutrustning Manualer