Stanley SXAC2550121 Bruksanvisning

Stanley Kompressor SXAC2550121

Läs nedan 📖 manual på svenska för Stanley SXAC2550121 (18 sidor) i kategorin Kompressor. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/18

3616 10/18

MODEL NO.

SXAC2550121

AIR COMPRESSOR

2HP 50L

For service, spare parts or product information,

please contact Smart Marketing Group Pty. Ltd.

AUST. 1300 660 457 N.Z. 0800 474 876

SUGGESTED APPLICATIONS

You may use some light duty air tools with this compressor.

Some examples of light duty tools are:

• Tyre Inflator

• Blow Gun

• Engine Cleaning Gun

• C Bradder

• T-Nailer

• Low Pressure Spray Gun

• Gravity Feed Spray Gun

• Air Hammer

• Sandblaster

This light duty air compressor is NOT recommended for use

with a spray gun. Always check the air requirement of the

tool wishing to be used to ensure that it is within this air

compressor’s air output.

Section Page

Contents 2

Suggested Applications 2

Introduction 3

Guarantee 3 – 4

General Safety Instructions 5 – 7

Electrical Information 8

Specific Safety Instructions 8

Components and Controls 9

Operating Instructions 10 – 15

Maintenance 16

Trouble Shooting 16

Parts Diagram 17

Technical Information 18

Contact Information 18

CONTENTS

Please take note of serial number and write here for

ease of reference:

Serial Number:

Date of Purchase:

Place of Purchase:

Receipt Number:

INTRODUCTION

Dear Customer,

Thank you for purchasing this compressor which has

passed through our extensive quality assurance processes.

Every care has been taken to ensure that it reaches you

in perfect condition. However, in the unlikely event that

you should experience a problem, or if you require any

assistance, please do not hesitate to contact us;

If you have a problem, call customer service do not

return this compressor to the place of purchase.

CUSTOMER SERVICE

Australia: 1300 660 457

New Zealand: 0800 474 876

Operating times: Monday – Friday

8.00am - 5.00 pm

Australian Eastern Standard Time (AEST)

EXPRESS WARRANTY

STATEMENT - COMPRESSOR

You are not required to do anything to register your

compressor purchase. Please attach the purchase receipt

to this manual and ensure both are kept safe. We hope you

enjoy your new compressor, and if you have any problems

call customer service on the above phone numbers. Do not

return to place of purchase.

Smart Marketing Group Pty Ltd (SMG) warrants

that this compressor will be free from manufacturing

faults or defects for 24 months from the date of

purchase, providing original purchase receipt is kept

and shown when needed and is subject to the terms

and conditions below.

If a warranty fault appears within the warranty period,

SMG reserves the right to replace or repair the product.

In the event that SMG chooses to replace the product,

this original warranty will expire at the original date.

If the product includes various accessories or components,

only the defective accessory or component will be replaced

or repaired.

SMG reserves the right to replace defective parts of the

product with parts and components of similar quality,

grade and composition where an identical part or

component is not available.

Products presented for repair may be replaced by

refurbished products of the same type rather than

being repaired. Refurbished parts may be used to

repair the products.

What is covered.

• Manufacturing fault or defect.

How to claim under this warranty.

• Call customer service.

• Ensure you have the following: Original purchase

receipt, Model of compressor, Serial number of

compressor.

• Discuss the issue.

• Customer service will advise which authorised service

agent to take the compressor to provided the issue is a

warranty one.

• Take compressor to authorised service agent for repair.

What is not covered.

• Commercial use of compressor.

• Use of compressor for hire.

• Use of compressor in a commercial premises.

• Damage or deterioration due to transport.

• Damage caused by negligence, misuse, abuse or

accident or incorrect voltage and wattage.

• Any corrosion or rusting.

• Damage caused by incorrect set up and start up.

• Replacement parts due to general wear and tear.

• Compressors with serial number defacement,

modiﬁcation or removal.

• Compressors which have been serviced by other than

an authorised SMG service agent.

• Compressors with no original purchase receipt.

• Compressors which have been on sold,

not original purchaser.

• Damage due non-servicing of compressor as is

required by this manual.

• Blockages / damage caused by dust, dirt, spiders

webs or insects.

• Damage caused by the incorrect ﬁtting of accessories.

• Damage caused by overloading, overworking

the compressor.

• Damage to attached equipment or third

party accessories.

• Damage caused by attached equipment or

third party accessories.

CONTACT DETAILS

Smart Marketing Group Pty Ltd

33-35 Lionel Road, Mt. Waverley

Victoria 3149, Australia.

Tel (+613) 9543 7266

Fax (+613) 9543 9839

service.group@sitro.com.au

Produktspecifikationer

Varumärke:	Stanley
Kategori:	Kompressor
Modell:	SXAC2550121
Färg på produkten:	Zilver
Lägsta drifttemperatur:	0 °C
Maximal temperatur (drift):	70 °C
Ursprungsland:	China
Certifiering:	CE, FCC, REACH
Hållbarhetscertifikat:	RoHS
Varumärkeskompatibilitet:	MSA Compliant
Våglängd:	1310 nm
Medeltid mellan fel (MTBF):	1000000 uur
Typ av anslutning:	QSFP28
Maximal dataöverföringshastighet:	103125 Mbit/s
Maximal-räckvidd:	40000 m
Strömförbrukning (typiskt):	4.5 W
Drifttemperatur (TT):	0 - 70 °C
SFP transceiver typ:	Vezel-optiek
Single-mode fiberoptisk kabel (SMF) stöds:	Ja
Multi-mode fiberoptisk kabel (MMF) stöds:	Nee
Fiberoptisk kontakt:	LC
SFP-sändare standard:	ER4
Duplexsystem:	Volledig
Kabelteknik för fiber-ethernet:	100GBASE
Digital Diagnostics Monitoring (DDM):	Ja
Tx-effekt (min):	-2.9 dBmW
Tx-effekt (max):	4.5 dBmW