StarTech.com 4PCIE-PCIE-ENCLOSURE Bruksanvisning

StarTech.com Inte kategoriserad 4PCIE-PCIE-ENCLOSURE

Läs nedan 📖 manual på svenska för StarTech.com 4PCIE-PCIE-ENCLOSURE (3 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/3

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: November 22, 2022

Product Diagram (4PCIE-PCIE-ENCLOSURE)

PCIe Expansion Chassis

PCIe 2.0 to 4 PCIe Slots Expansion Chassis - USB Type-C

Port/LED/

Connector Function

1PCIe Expansion

Slots

• Install up to Four PCIe cards

• PCIe version 2.0 p1-x1 slots

• 10 Gbps aggregate host bandwidth

• Full length cards supported

2Mounting

Brackets

• (Optional) Allows for a permanent installation of the PCIe

Expansion Chassis to a at and stable surface

• at the and of the Mounting Holes Front Back PCIe

Expansion Chassis Mounting Brackets secure the

3On/O Switch

• Turns the or Expansion Chassis On O

• The correct sequence to power the device:

• Power on: Power the On PCIe Expansion Chassis

rst, then the Host Computer

• Power o: Power the rst, then O Host Computer

the PCIe Expansion Chassis

4DC Power Port

• Connect the to a PCIe Expansion Chassis Power Source

using the included Power Adapter

• Recommended 12 V and 3 A. Supports 12 to 24 V input

5USB Type-C

Connector

• Used to connect the to a PCIe Expansion Chassis Host

Computer

• If the is disconnected during use, USB Type-C Cable

the must be restarted to reestablish the Host Computer

connection

• For a secure and correct cable connection, threaded

holes around the r allow to USB Type-C Connecto

Screw-lock USB Type-C Cable the included

6USB Type-C LED

Indicator

• Indicates if the included is on the USB Type-C-Cable

correct orientation. The cable is not reversible

• Solid Green = Correct orientation

7Power LED

Indicator

• Indicates if the is turned or On/O Switch On O

• Solid Red = On

• O = O

8Terminal Block

Connector

• Connect the to a PCIe Expansion Chassis DC Power

Source

• Recommended 12 V and 3 A. Supports 12 to 24 V input

9Metal Cover • Remove the to install the Metal Cover PCIe cards

*Product may vary from image

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: November 22, 2022

PCIe Host Adapter Card

Port/LED/

Connector Function

1Bracket • Secures the card to the . The Host Computer Case Full-

height Bracket comes pre-installed

JP1 Jumper

(BUS PWR)

JP2 Jumper

(WAKE) (not

visible in image)

• Enables the to provide power to PCIe Host Adapter Card

the via the . PCIe Expansion Chassis USB Type-C Cable

• Three position are available for : 12V, NC JP1

(default), and 5V

• To inject power via the it PCIe Host Adapter Card

must be used in combination with and on JP1 JP2

the PCIe Expansion Chassis

• Enables the , and allows to wake thePCIe WAKE# Pin

Host Computer Wake-on-LAN (WoL) Packetswhen

have been received. A capable must WoL Network Card

be installed in the . PCIe Expansion Chassis

• Two positions are available for : DIS (disabled) JP2

and ENA (default)

3LP4 Power

Connector • Connect theOptional: Host Computer Power Supply

4SATA Power

Connector • Connect theOptional: Host Computer Power Supply

5PCIe x2

Connector • Insert into a on the host Host ComputerPCIe Slot

6USB Type-C

Connector

• Used to connect the to the PCIe Host Adapter Card PCIe

Expansion Chassis

• For a secure and correct cable connection, threaded

holes around the r allow to USB Type-C Connecto Screw-

lock USB Type-C Cable the included

Package Contents

• PCIe to PCIe Expansion Chassis x 1

• PCIe Host Adapter Card

• 6ft (1.8m) USB Type-C to C Male to Male Cable x 1

• Low-Prole Bracket x 1

• Power Adapter x 1

• Terminal Block Connector x 1

• Mounting Brackets x 2

• Mounting Brackets Screws x 4

• Quick-Start Guide x 1

Requirements

For the latest requirements, please visit www.startech.com/4PCIE-PCIE-ENCLOSURE

• Host Computer with an available PCIe Slot (x2, x4, x8, or x16)

• Phillips head screwdriver

Installation

WARNING!

Static electricity can severely damage the PCIe card(s) ensure that you are adequately

grounded before you open your Host Computer case or touch the PCIe card(s). You

should wear an anti-static strap or use an anti-static mat when installing any Host

Computer component. If an anti-static strap isn’t available, discharge any built-up

static electricity by touching a large grounded metal surface for several seconds. Only

handle the PCIe card(s) by the edges and don’t touch the golden connectors.

Install the PCIe Host Adapter Card

1. Turn the and any that are connected O Host Host Computer Peripheral Devices

to it (e.g. printers, external hard drives, etc.).

2. Unplug the from the back of the .Power Cable Host Computer

3. Disconnect any that are connected to the .Peripheral Devices Host Computer

4. Remove the from the . Consult the documentation that Cover Host Computer Case

came with the for details about doing this safely.Host Computer

5. Locate an available and remove the corresponding from PCIe Slot Slot Cover Plate

the back of the . Consult the documentation that came with Host Computer Case

the for details about doing this safely. The Host Computer PCIe Host Adapter Card

works in , , , or . PCIe x2 x4 x8 x16 Slots

6. Gently insert the into the and fasten the PCIe Host Adapter Card PCIe Express Slot

Bracket Host Computer Case to the back of the .

Note: If you install the PCIe Host Adapter Card into a small form factor or a low-prole

desktop system, it may be necessary to replace the pre-installed standard full-height

bracket with the included low-prole bracket.

8. (Optional) Connect a or from the SATA Power Cable LP4 Host Host Computer

Power Supply.

9. Return the onto the .Cover Host Computer Case

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com

could void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that

may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Warranty Information

This product is backed by a two years warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or

agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots,

loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply,

the limitations or exclusions contained in this statement may not apply to you.

Safety Measures

• Read the entire manual and ensure the instructions are fully understood before assembling and/or using this product.

Mesures de sécurité

• Lisez tout le manuel et assurez-vous que vous comprenez les instructions avant de commencer à assembler et utiliser

ce produit.

安全対策

• 最初に取扱説明書を最後まで読み、本製品の組み立て方をすべて理解してから組み立て作業を始めて下さい。

Misure di sicurezza

• Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni prima di iniziare ad assemblare e a utilizzare

questo prodotto.

Säkerhetsåtgärder

• Läs hela manualen och se till att du förstår instruktionerna innan du börjar montera och använda produkten.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

10. Reconnect the to the back of the .Power Cable Host Computer

11. Reconnect all of the disconnected in .Peripheral Devices Step 1

Install PCIe Cards in the PCIe Expansion Chassis

Sharp edges! Be mindful of the sharp edges around the PCIe Expansion Chassis when

the Metal Cover is removed.

1. Turn the and unplug all cable connections.O PCIe Expansion Chassis

2. Release the by removing the (x 12) using a Metal Cover Screws Phillips Head

Screwdriver Screws . The are located on top and the opposite side of the connectors

on the . PCIe Expansion Chassis

3. (Optional) The and settings on the board allow you to choose JP2 JP1 Jumper

dierent power settings. (Figure 1)

Jumper Function

1JP1 Jumper

(PWR IN)

• (default) receives power from the or EXT DC Power Port

Terminal Block Connector

• receives power from the VBUS PCIe Host Adapter Card

• It must be used in Combination with (PWR CTL) set to JP2

HOST

2JP2 Jumper

(PWR CTL)

• the provides power HOST PCIe Host Adapter Card

• (BUS PWR) on the must be JP1 PCIe Host Adapter Card

on the or12V 5V Position

• (default) the provides power from ON PCIe Expansion Chassis

the or DC Power Port Terminal Block Connector

3JP3 (CLKREQ) • Keep it on the default (ENA) position at all timesEnabled

4. Locate an available on the , using a PCIe Slot Expansion Chassis Phillips Head

Screwdriver Slot Cover Plate PCIe Expansion remove the corresponding from the

Chassis.

5. Gently insert the (s) into the and fasten the to the PCIe Card PCIe Slot Bracket PCIe

Expansion Chassis PCIe Expansion Chassis PCIe Cards x1 . The supports only.

6. Install the back onto the . Metal Cover PCIe Expansion Chassis

7. the onto the and the Screw-Lock USB Type-C Cable PCIe Expansion Chassis

PCIe Host Adapter Card Host Computer on the . This ensures the correct cable

orientation.

8. Connect the or use the optional to Power Adapter Terminal Block Connector

supply power. Turn the by ipping the .On Expansion Chassis On/O Switch

9. Turn the . On Host Computer

Note: No drivers are needed for the PCIe Expansion Chassis. Some PCIe Cards may

need drivers to nish their installation.

(Optional) Install the Mounting Brackets

1. Use the (x 2) and to fasten the Mounting Screws Phillips Head Screwdriver Front

Mounting Bracket PCIe Expansion Chassis on the .

2. Repeat to install the . Step 1 Rear Mounting Bracket

Figure 1

Produktspecifikationer

Varumärke:	StarTech.com
Kategori:	Inte kategoriserad
Modell:	4PCIE-PCIE-ENCLOSURE

Behöver du hjälp?

Om du behöver hjälp med StarTech.com 4PCIE-PCIE-ENCLOSURE ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Inte kategoriserad StarTech.com Manualer

StarTech.com 35FCREAD Bruksanvisning

23 Oktober 2024

StarTech.com ST521PMINT Bruksanvisning

23 Oktober 2024

StarTech.com SAT32MSATPEX Bruksanvisning

23 Oktober 2024

StarTech.com SAT32MSATM Bruksanvisning

23 Oktober 2024

StarTech.com SAT32MSAT257 Bruksanvisning

23 Oktober 2024

StarTech.com SAT2CF Bruksanvisning

23 Oktober 2024

StarTech.com PIB2S31 Bruksanvisning

23 Oktober 2024

StarTech.com PEX4SFF8639 Bruksanvisning

23 Oktober 2024

StarTech.com ZIF2CF Bruksanvisning

23 Oktober 2024

StarTech.com USB3S2SATA Bruksanvisning

23 Oktober 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024

Manhattan 461504 Bruksanvisning

27 Oktober 2024

Sungrow SG125HV Bruksanvisning

27 Oktober 2024

Schneider CCT724319 Bruksanvisning

27 Oktober 2024

Technoline WS 250 Bruksanvisning

27 Oktober 2024

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024

Kupper 12152 Bruksanvisning

27 Oktober 2024

JennAir CARBON24L Bruksanvisning

27 Oktober 2024

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024