StarTrac E-TR Treadmill Bruksanvisning
StarTrac
Motionscykel
E-TR Treadmill
Läs nedan 📖 manual på svenska för StarTrac E-TR Treadmill (7 sidor) i kategorin Motionscykel. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/7
STAR TRAC FITNESSTM
E Series Treadmill
Install Guide
UNPACKING
Remove all parts from the shipping crate and verify that the following parts were included in your shipment:
Description Qty.
Installation Instructions E-TR & E-TRx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Tie Strap, 14* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Screw, Truss Head, #10-24 x 3/4* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Screw, Pan Head, M4x.7, 19mm* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Frame Assembly w/ Motor Shroud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Top Rail with Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Neck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Side Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Screw, Button Head Socket Cap, 1/4”-28 UNC x 3/8”* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Screw, Socket Head Cap, 5/16”-18 UNC x 1.0”* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Bolt, Socket Head Cap, 5/16”-18 UNC x 3.0”* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Washer, Flat, 5/16” I.D. x 1.2” O.D.* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Washer, Split Lock, 5/16”* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Hex (Allen) key, 1/4”* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hex (Allen) key, 5/32”* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Screwdriver, Phillips, #2* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Screwdriver (blade-tip), 3/32”* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Owner’s Manual with Warranty Registration Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
*Part of included STAR TRAC tool kit.
**E-TRe & E-TRxe models will have embedded touch screen and surrounding plastics packaged separately.
Should any component not be present or if you have any operational questions, please call Star Trac’s Customer Care department at
(800) 503-1221 or USA 1-714-669-1660. Specifically refer to your treadmill serial number and model number listed below:
Serial No._________________________________________________________________________
Model No._________________________________________________________________________
NOTE: The following assembly procedure applies to the E SERIES Treadmills.
ASSEMBLY
The following tools are required for assembly: Hex (Allen) Key, 1/4”; Hex (Allen) Key, 5/32”; Screwdriver, Phillips. To assemble your
STAR TRAC E SERIES TREADMILL, just follow these steps.
NOTE: Don’t fully tighten bolts and screws until all parts are assembled.
1. Unpacking and Positioning the Frame Assembly
Remove all the packaging material so the treadmill is sitting, ready for
assembly, on the shipping crate platform. With a helper, lift the tread-
mill frame assembly from the shipping crate platform and place it in
the location where it will be used. Make sure the unit is placed near a
power outlet.
Caution: The motor shroud end of the frame assembly is very heavy.
Two people may be needed to lift this end when moving the frame
assembly.
ASSEMBLY AND SETUP
STAR TRAC E SERIES TREADMILL Install Guide
2. Installing the Neck
2a) Pop out the Front Motor Shroud Cap from the Motor
Shroud and remove the Neck Grommet and set it aside.
2b) Remove the Motor Shroud by removing the (2) #10 Truss
head screws.
2c) Insert neck as shown and fasten with (2) 5/16-18 x 3.0”, (2)
5/16-18 x 1.0” socket head screws, (4) 5/16 washers and
(4) lock washers. DO NOT fully tighten yet.
2d) Route all cables through lower neck service opening into
motor compartment. Refer to CONNECTING THE
CABLES for cable routing and connection.
STAR TRAC E SERIES TREADMILL Install Guide
Step 2a & 2b
Step 2c
Step 2d
Screws
Motor Shroud
Screws
Motor Shroud
Cap
Produktspecifikationer
| Varumärke: | StarTrac |
| Kategori: | Motionscykel |
| Modell: | E-TR Treadmill |
Behöver du hjälp?
Om du behöver hjälp med StarTrac E-TR Treadmill ställ en fråga nedan och andra användare kommer att svara dig
Motionscykel StarTrac Manualer
13 September 2024
29 Augusti 2024
26 Augusti 2024
21 Augusti 2024
19 Augusti 2024
18 Augusti 2024
Motionscykel Manualer
- Motionscykel Medion
- Motionscykel Ab Magic Pro
- Motionscykel Infiniti
- Motionscykel Tel Sell
- Motionscykel Maxxus
- Motionscykel Toorx
- Motionscykel BH Fitness
- Motionscykel Crivit
- Motionscykel VirtuFit
- Motionscykel Medisana
- Motionscykel Batavus
- Motionscykel Tunturi
- Motionscykel Nautilus
- Motionscykel Kettler
- Motionscykel Bowflex
- Motionscykel Vision Fitness
- Motionscykel LifeGear
- Motionscykel Domyos
- Motionscykel Skandika
- Motionscykel SportsArt
- Motionscykel Life Fitness
- Motionscykel Finnlo
- Motionscykel Capital Sports
- Motionscykel Christopeit
- Motionscykel York Fitness
- Motionscykel Kayoba
- Motionscykel Hastings
- Motionscykel Hammer
- Motionscykel Sportplus
- Motionscykel Body Sculpture
- Motionscykel Elite
- Motionscykel Bremshey
- Motionscykel Matrix
- Motionscykel Flow Fitness
- Motionscykel Jetstream
- Motionscykel Xterra
- Motionscykel Tacx
- Motionscykel Cardiostrong
- Motionscykel Inspire
- Motionscykel Fit Bike
- Motionscykel Vermeiren
- Motionscykel Weslo
- Motionscykel DKN
- Motionscykel Horizon Fitness
- Motionscykel Energetics
- Motionscykel Reebok
- Motionscykel Darwin
- Motionscykel Joy Sport
- Motionscykel Schwinn
- Motionscykel Focus Fitness
- Motionscykel Vitalmaxx
- Motionscykel Rambler
- Motionscykel Quality Sports
- Motionscykel Life Gear
- Motionscykel Klarfit
- Motionscykel Tommy Teleshopping
- Motionscykel DC Athletics
- Motionscykel ProForm
- Motionscykel Dunlop
- Motionscykel Sportop
- Motionscykel Pro-form
- Motionscykel Horizon
- Motionscykel Waterrower
- Motionscykel NordicTrack
- Motionscykel Sportstech
- Motionscykel Technogym
- Motionscykel RB Sports
- Motionscykel Athlett
- Motionscykel MPF
- Motionscykel Rossler
- Motionscykel Omni
- Motionscykel StrengthMaster
- Motionscykel Lifespan
- Motionscykel Stamm
- Motionscykel Motion
- Motionscykel Gymform
- Motionscykel Everfit
- Motionscykel Icon
- Motionscykel Proteus
- Motionscykel Kendox
- Motionscykel Spokey
- Motionscykel U.N.O.
- Motionscykel Yellow Sport
- Motionscykel Powerpeak
- Motionscykel Rebblo
- Motionscykel Keiser
- Motionscykel Eco Run
- Motionscykel Assault Bike
- Motionscykel Blumill
- Motionscykel BodyCraft
- Motionscykel First Degree
- Motionscykel BodySculpture
- Motionscykel Elite Fitness
- Motionscykel Spirit
- Motionscykel Star Uno
- Motionscykel Van Speijk
- Motionscykel Octane Fitness
- Motionscykel Vibrafit
- Motionscykel Dr.Kern
- Motionscykel MX Select
- Motionscykel HMM
- Motionscykel Body Action - Tommyteleshopping
- Motionscykel Impec
- Motionscykel Xelus
- Motionscykel Body Bike
- Motionscykel Assault Fitness
- Motionscykel Striale
Nyaste Motionscykel Manualer
27 Oktober 2024
27 Oktober 2024
25 Oktober 2024
21 Oktober 2024
20 Oktober 2024
18 Oktober 2024
17 Oktober 2024
15 Oktober 2024
10 Oktober 2024
8 Oktober 2024