Stihl 046 Bruksanvisning
Läs nedan 📖 manual på svenska för Stihl 046 (55 sidor) i kategorin Motorsåg. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/55
A. Kickback Safety Precautions
!Warning!
Kickback may occur when the nose
or tip of the guide bar touches an
object, or when the wood closes in
and pinches the saw chain in the
cut. Tip contact in some cases may
cause a lightning fast reverse
reaction, kicking the guide bar up
and back towards the operator.
Pinching the saw chain along the
top of the guide bar may push the
guide bar rapidly back towards the
operator. Either of these reactions
may cause you to lose control of the
saw which could result in serious
personal injury.
Section 5.12 of ANSI B 175.1-1991
sets certain performance and
design criteria related to chainsaw
kickback. STIHL has developed a
color code system using green and
yellow to help you select a power-
head, bar and chain combination
that complies with the kickback
requirements of the ANSI Standard.
See the sections entitled "Safety
Precautions" and "Specifications"
of this manual.
Do not rely exclusively upon the
safety devices built into your saw.
As a chainsaw user, you should
take several steps to keep your
cutting jobs free from accident or
injury.
1. With a basic understanding of
kickback, you can reduce or eli-
minate the element of surprise.
Sudden surprise contributes to
accidents.
2. Keep a good firm grip on the
saw with both hands, the right
hand on the rear handle,
and the left hand on the front
handle, when the engine is run-
ning. Use a firm grip with
thumbs and fingers encircling
the chainsaw handles.
A firm grip will help you reduce
kickback and maintain control
of the saw.
Don’t let go.
3. Make sure the area in which you
are cutting is free from obstruc-
tions. Do not let the nose of the
guide bar contact a log, branch,
or any other obstruction while
you are operating the saw.
4. Cut at high engine speeds.
5. Do not overreach or cut above
shoulder height.
6. Follow manufacturer’s
sharpening and maintenance
instructions for the saw chain.
7. Only use replacement bars and
chains specified by the manu-
facturer or the equivalent.
8. Reduced kickback bars and low
kickback chains are designed
to reduce the risk of kickback
injury. Ask your STIHL dealer
about these devices.
B. Other Safety Precautions
1. Do not operate a chainsaw with
one hand! Serious injury to the
operator, helpers, bystanders,
or any combination of these
persons may result from one-
handed operation. A chainsaw
is intended to be used with two
hands.
2. Do not operate a chainsaw when
you are fatigued.
3. Use safety footwear; snug-fitting
clothing; protective gloves; and
eye, hearing, and head protect-
ion devices.
Important Safety Precautions for Chain Saw Users
continued on the back inside cover
Main Parts of Saw 2
Definitions 3
Safety Precautions 4
- The Operator 4
- The Saw 6
- The Use of the Saw 6
- Maintenance, Repair and Storing 23
Mounting the Bar and Chain 25
Tensioning the Saw Chain 26
Checking Chain Tension 26
Fuel 26
Fueling 27
Chain Lubricant 28
Filling Chain Oil Tank 28
Chain Brake 29
Information Before You Start 30
Starting the Saw 30
Checking Chain Lubrication 33
Taking Care of Guide Bar 34
Oil Quantity Control 34
During Break-in Period 35
During Operation 35
After Finishing Work 35
Air Filter System 36
Remove, Cleaning 36
HD Filter 37
Winter Operation 38
Electric Handle Heating* 38
Adjusting Carburetor 39
Motor management 39
Checking Spark Arresting
Screen in Muffler 40
Checking Spark Plug 41
Replacing Starter Rope
and Rewind Spring 42
Checking and Replacing
Chain Sprocket 43
Storing the Machine 44
Maintaining and Sharpening
Saw Chain 45
Maintenance Chart 48
Specifications 49
Ordering Spare Parts 50
Stihl Incorporated Federal and
California Emission Control Warranty
Statement 51
* Special equipment
This Manual contains operating and
safety instructions for all STIHL 046
series power saws.
Pay special attention to the safety
precautions outlined on the inside cover
and on pages 4 to 24. Allow only persons
who understand this Manual to operate
your chainsaw.
To receive maximum performance and
satisfaction from your STIHL chainsaw,
it is important that you read and under-
stand the maintenance and safety
precautions before using your saw.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
Manual.
!Warning!
Because a chainsaw is a high-speed
wood-cutting tool, some special safety
precautions must be observed as with
any other power saw to reduce the risk of
personal injury. Careless or improper use
may cause serious or even fatal injury.
STIHL’s philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time-to-time. If the
operating characteristics or the appear-
ance of your saw differ from those
described in this Manual, please contact
your STIHL dealer for informations and
assistance.
Contents
2000 Andreas Stihl AG & Co., Waiblingen
0458 145 3021. M8. F0. Fi. Printed in Germany
Printed on chlorine-free paper
Printing inks contain vegetable oils,
paper is recyclable
046 1
Produktspecifikationer
| Varumärke: | Stihl |
| Kategori: | Motorsåg |
| Modell: | 046 |
Behöver du hjälp?
Om du behöver hjälp med Stihl 046 ställ en fråga nedan och andra användare kommer att svara dig
Motorsåg Stihl Manualer
4 Augusti 2024
Motorsåg Manualer
- Motorsåg Electrolux
- Motorsåg DeWalt
- Motorsåg Karcher
- Motorsåg Al-ko
- Motorsåg Gude
- Motorsåg Stanley
- Motorsåg Florabest
- Motorsåg Dremel
- Motorsåg Homelite
- Motorsåg Husqvarna
- Motorsåg Scheppach
- Motorsåg Atika
- Motorsåg McCulloch
- Motorsåg Sachs Dolmar
- Motorsåg Dolmar
- Motorsåg Fuxtec
- Motorsåg Grizzly
- Motorsåg Echo
- Motorsåg Solo
- Motorsåg Grouw
- Motorsåg Levita
- Motorsåg Efco
- Motorsåg PowerTech
- Motorsåg Toledo
- Motorsåg Benson
- Motorsåg Partner
Nyaste Motorsåg Manualer
18 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024