Stihl HL 75 Bruksanvisning

Stihl Häcksax HL 75

Läs nedan 📖 manual på svenska för Stihl HL 75 (74 sidor) i kategorin Häcksax. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/74

1HL 75, HL 75 K

English / USA

Printing inks contain vegetable oils;

paper can be recycled.

Printed on chlorine-free paper.© ANDREAS STIHL AG & Co. KG, 2003

0458 389 3021. M1.4. C3. PM. Printed in Germany

STIHl

Contents

Guide to Using this Manual .............. 2

Safety Precautions ........................... 3

Assembling the Unit ....................... 12

Using the Hedge Cutter .................. 13

Fuel ................................................ 15

Fueling ............................................ 16

Adjusting Cutter Bar Angle ............. 17

Fitting the Harness ......................... 18

Starting / Stopping the Engine ........ 18

Cleaning the Air Filter ..................... 21

Motor Management ........................ 22

Adjusting the Carburetor ................ 22

Spark Arresting Screen* in Muffler . 24

Checking the Spark Plug ................ 24

Lubricating the Gearbox ................. 25

Replacing the Starter Rope

and Rewind Spring ......................... 26

Sharpening Instructions .................. 29

Operating Instructions .................... 29

Storing the Machine ........................ 29

Maintenance Chart ......................... 30

Parts and Controls .......................... 31

Definitions ....................................... 32

Specifications ................................. 33

Maintenance and Repairs ............... 34

STIHL Incorporated Federal

and California Emission Control

Warranty Statement ........................ 35

* see “Guide to Using this Manual”

Allow only persons who understand this

manual to operate your hedge cutter.

To receive maximum performance and

satisfaction from your STIHL hedge

cutter, it is important that you read and

understand the maintenance and safety

precautions, starting on page 3, before

using your hedge cutter.

Contact your STIHL dealer or the STIHL

distributor for your area if you do not

understand any of the instructions in this

manual.

!Warning!

Because a hedge cutter is a high-speed

cutting tool some special safety

precautions must be observed to reduce

the risk of personal injury.

Careless or improper use may cause

serious or even fatal injury.

STIHL's philosophy is to continually

improve all of its products. As a result,

engineering changes and improve-

ments are made from time to time. If the

operating characteristics or the

appearance of your hedge cutter differs

from those described in this manual,

please contact your STIHL dealer for

information and assistance.

English / USA

HL 75, HL 75 K

Pictograms

All the pictograms attached to the

machine are shown and explained in

this manual.

The operating and handling instructions

are supported by illustrations.

Symbols in text

The individual steps or procedures

described in the manual may be marked

in different ways:

:Step or procedure without direct

reference to an illustration.

Description of step or procedure that

refers directly to the illustration and

contains item numbers that appear in

the illustration.

Example:

Loosen the screw (1)

Lever (2) ...

In addition to the operating instructions,

this manual may contain paragraphs

that require your special attention. Such

paragraphs are marked with the

symbols described below:

Warning where there is a risk of an

accident or personal injury or

serious damage to property.

Warning where there is a risk of

damaging the machine or individual

components.

Note or hint which is not essential

for using the machine, but may

improve the operator’s under-

standing of the situation and result

in better use of the machine.

Note or hint on correct procedure in

order to avoid damage to the

environment.

Equipment and features

This instruction manual refers to

several models with different

features. Components that are not

installed in all models and related

applications are marked thus *.

Such components are available as

special accessories from your

STIHL dealer.

Engineering improvements

STIHL’s philosophy is to continually

improve all of its products. As a result,

engineering changes and improvements

are made from time to time. If the

operating characteristics or the

appearance of your machine differ from

those described in this manual, please

contact your STIHL dealer for

assistance.

Therefore, we cannot be responsible for

changes, modifications or

improvements not covered in this

manual.

Guide to Using this Manual

Produktspecifikationer

Varumärke:	Stihl
Kategori:	Häcksax
Modell:	HL 75
Färg på produkten:	Black, White, Yellow
Vikt:	5000 g
Vattennivåindikator:	Ja
Förpackningens vikt:	22800 g
Förpackningens bredd:	410 mm
Djuppackning:	245 mm
Förpackningshöjd:	520 mm
Certifiering:	CE, TÜV
Antal munstycken:	1
Mätglaset:	Ja
Slangens längd:	1.5 m
Axelband:	Ja
Typ produkt:	Drukspuit voor op de rug
Maximalt tryck:	6 bar
Tank kapacitet:	20 l
Munmaterial:	Geelkoper
Justerbar axelrem:	Ja
Effektivt innehåll:	18 l
Tankmaterial:	Polypropyleen