Sun Pumps PCA-30M1D Bruksanvisning

Sun Pumps Inte kategoriserad PCA-30M1D

Läs nedan 📖 manual på svenska för Sun Pumps PCA-30M1D (17 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/17
Table of Contents
Introduction ………………………………………………………………………... 1.0
Precautions
Product Overview …………………………………………………………………. 2.0
Controller Features ………………..………………………………………………. 2.1
Application ………………………………………………………………………... 2.2
Installation and Operations ………………………………………………………… 3.0
Warning
Location …………………………………………………………………………… 3.1
System Design B 3.2 asics ……………………………………………………………...
Figure 1: Solar Pump System Terms and Head Calculations
Well Measurements ……………………………………………………………… 3.3
Pump Installation ………………………………………………………………….. 3.4
Wiring 3.5………………………………………………………………………………
Figure 2: Control Panel
Figure 3: Dip Switch Settings
Controller Settings ………………………………………………………………… 3.6
Auxiliary Control Circuits .. ... ……………………………………………… … ……… 3.7
Remote Switch
Low Water Shut-Down Circuit
Power Limit (Speed Control)
Troubleshoot ing …………………………………………………………...……….. 4.0
Controller does not turn on
Controller turns on but pump does not run
Pump is running but the output is low
Pump draws excessive current
Before Calling Sun Pumps
Before Calling SunPumps …………………………………………………………... 5.0
Warranty Statement ………………………………………………………………… 6.0
Phone (928) 348-9652 Fax (928) 348-9653
1.0 Introduction
Thank you for selecting a SunPumps SD series solar pump system. The SDS series pump and PCA- -S 30
M1D series pump controller are the key components to high quality solar powered pumping systems. Their
stand-alone, pollution free operation makes them an ideal solution for remote homes, irrigation projects,
and wildlife and stock watering without violating the environment.
SunPumps SDS series pumps are diaphragm type, DC powered, submersibles constructed of high quality
stainless steel for the SDS-D and SDS-Q series pumps and Ryton and stainless steel for the SDS-T series
pumps. These pumps were designed specically for water delivery in remote locations .
The PCA series controllers are microprocessor based solid state DC power converters designed as the
interface between a solar module array and the SDS series DC pump motor. The purpose of the controller
is to operate the high eciency, high reliability DC motor and maximize the total daily water output while
providing protection for the pump as well as providing an interface with other related pumping system
equipment.
Although these SDS series pump systems are easy to install, please read this manual to become
familiar with the controller features, functions, connection points and various configurations. For
future reference, keep this manual and other relevant product information in a safe place.
PRECAUTIONS
Safety First Always understand what you are doing when working with any form of –
electricity. Guessing may cause product damage and/or severe personal injury.
Shut down all power when working on the system.
Do not attempt to feed live wires into the PC-series controller. P duct damage and/or ro
personal injury may result.
Do not exceed the voltage rating of the controller.
Do not set the controller to exceed the power rating of the motor.
Do not splash water on the controller when the cover is open.
Mount the controller in a shaded, well vented position, vertical .
2.0 Product Overview
The SunPumps PCA- -M series controllers were designed specically for SunPumps SDS-series, DC 30 1D
submersible pumps. When properly installed and congured, the unique features incorporated into this
stand-alone system will automatically control and protect your pump system permitting many years of
dependable, trouble free service.
When used as a solar electric panel direct system the PCA series controllers will provide pump protection
from ov -voltage and over-current conditions as well as current boosting in low sunlight conditions. er
2.1 Controller Features
1. Current boosting for matching the load requirements of the pump.
2. Voltage regulation of the solar electric array around its maximum power point. (MPPT)
3. Over-current protection via integrated electronic circuit breaker.
4. Voltage and current limiting to pump motor..
5. Adjustable output motor power control for precision output ow.
6. System ON/OFF switch.
7. L indicators; 1 Power In, 2. Motor R , 3. Remote Switch 4. Over-Current, 5. Low Water ED . un ,
Cut-O

Produktspecifikationer

Varumärke: Sun Pumps
Kategori: Inte kategoriserad
Modell: PCA-30M1D

Behöver du hjälp?

Om du behöver hjälp med Sun Pumps PCA-30M1D ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Sun Pumps Manualer

Sun Pumps

Sun Pumps PCA-30M1D Bruksanvisning

7 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Hendi

Hendi Uniq 860557 Bruksanvisning

20 December 2024
MGL Avionics

MGL Avionics XTreme - EFIS Bruksanvisning

20 December 2024
Yamaha

Yamaha CTL-BN1 Bruksanvisning

20 December 2024
Newline

Newline Display Management Bruksanvisning

20 December 2024
Newline

Newline Huddle Cam Bruksanvisning

20 December 2024
Newline

Newline Chromebox Bruksanvisning

20 December 2024
Ketron

Ketron K8 Bruksanvisning

20 December 2024
Hammond

Hammond EXP-100F Bruksanvisning

20 December 2024
Hotone

Hotone Ampero Press Bruksanvisning

20 December 2024
Studiologic

Studiologic FP50 Bruksanvisning

20 December 2024