SunBriteTV SB-CM-T-L-BL Bruksanvisning

SunBriteTV Inte kategoriserad SB-CM-T-L-BL

Läs nedan 📖 manual på svenska för SunBriteTV SB-CM-T-L-BL (8 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/8

SB-CM-T-L-BL

SB-CM-DT-L-BL

Weatherproof Universal Single & Dual Ceiling Mount

for Large TVs

INSTALLATION MANUAL

WARNING

•We highly recommend this product be installed by a qualied professional.

•Please do not begin installation until you have thoroughly read and understood these instructions.

•This mount supports display mounting from VESA 200x200 up to 700X500.

•This mount supports a maximum load of 175 lbs (79.5 kg).

•Ensure the ceiling will safely support the combined weight of the mount and your chosen display.

•The manufacturer does not accept responsibility for incorrect installation.

CAUTION:

These ceiling mounts are intended for use only with the maximum weight of 175 lbs (79.5 kg).

SPECIFICATIONS BOX CONTENTS TOOLS REQUIRED

•Power Drill

•3/16” (5mm) Drill Bit

•5/16” (8mm) Masonry Bit

•1/2" (13mm) Wrench

•Phillips Head Screw Driver

•Ceiling Plate Assembly (1)

•Mounting Head (1)

•Adapter Plate (1/2)

•TV Arms (2/4)

•18" Fixed Extension Pole (1)

•Hardware Kit (1) •3/8” Socket Wrench

•Maximum Load: 175 lbs (79.5 kg)

•Extension: 18 inches

•Stainless Steel Mounting Hardware

•Pan/Swivel Range: 360°

•Tilt Range: +0° /-20°

•Weather Resistant Coating

•VESA patterns: 200x200 up to

700X500

•7/16” Socket Wrench

HARDWARE KIT CONTENTS

M6 x 12mm Philips

Head Screw (x4/8)

M8 x 16mm Philips

Head Screw (x4/8)

Allen Wrench 2.5mm,

Security (x )1

Allen Wrench,

4mm (x1)

M4 x 20mm Philips

Head Screw (x4/8)

M5 x 30mm Philips

Head Screw (x4/8)

M6 x 30mm Phillips

Head Screw (x4/8)

M8 x 20mm Phillips

Head Screw (x4/8)

M8 x 40mm Phillips

Head Screw (x4/8)

M8 Nylock Nut (x4/8)

M5 x 12mm Philips

Head Screw (x4/8)

M6 x 20mm Philips

Head Screw (x4/8)

Security Wrench (x1)

M5 (16 x 5.3 x 1.5mm)

Metal Washer (x4/8)

#14 x 2.5” Lag Screw (x )6

M8 (20.5 x 8.5 x 2mm)

Metal Washer (x1 / )8 30

Locking Pin (x1/2)

M4/M5/M6 spacer:

12mm (x4/8)

M6/M8 Spacer:

17.8mm (x4/8) M5 x mm Set Screw (x )4 6

M4 x 12mm Philips

Head Screw (x4/8)

M6 (17.8 x 6.5 x 1.5mm)

Metal Washer (x4 )/8

M Nylock Nut (x10 1)

M10 x 65mm Bolt 1 (x )

INSTALLATION

Step 1: Mark Mounting Hole Locations

Place the ceiling plate on the mounting surface and mark the mounting

hole locations.

Step 2: Mount the Ceiling Plate

For Mounting on a Wood Joist (Fig 1)

a. Drill four holes into joist using a 3/16” drill bit. Be sure to drill into the

center of the joists.

b. Insert four lag screws into holes through the ceiling plate and tighten

down.

WARNING: Tighten screws so that the ceiling plate is rmly

attached, but do not over tighten. Over-tightening can damage

the screws, greatly reducing their holding strength.

For Mounting on a Concrete Ceiling (Fig 2)

NOTE: Concrete anchors not provided. 5/16” x 2-1/2” Red Head®

Hex Sleeve Anchors, #50113, are recommended for concrete or

cinder block installation.

WARNING: When installing ceiling plate on cinder block, verify rst

that you have a minimum of 1-3/8” of concrete thickness to be used

for the concrete wall anchors (not included). Do not drill into mortar

joints! Be sure to mount in a solid part of the block, generally

1”minimum from the side of the block. Cinder block must meet

ASTM C-90 specications. It is suggested that a standard electric

drill on slow setting is used to drill the hole instead of a hammer

drill to avoid breaking out the back of the hole when entering a void

or cavity.

Concrete must be 2000 psi density minimum. Lighter density

concrete may not hold anchor.

a. Drill four holes into concrete using 5/16” masonry bit. Insert hex sleeve

anchors (not supplied) and insert per instructions included with wall

anchors.

b. Remove washer and nut from end of bolt from all four anchor studs.

Place ceiling plate over bolts so they align with the four holes in ceiling

plate.

c. Re-install washer and nut onto end of bolt and tighten down using a

7/16” socket wrench until secure per instructions included with wall

anchors.

WARNING: Tighten screws so that the ceiling plate is rmly

attached, but do not over tighten. Over-tightening can damage

the screws, greatly reducing their holding strength.

Step 3: Attach the Extension Pole

Thread in extension pipe so that the holes in the pipe align with the holes

in the bracket, then tighten the through-bolt and tighten the set screw

(Fig 3).

Fig 1

Fig 2

Fig 3

Produktspecifikationer

Varumärke:	SunBriteTV
Kategori:	Inte kategoriserad
Modell:	SB-CM-T-L-BL

Behöver du hjälp?

Om du behöver hjälp med SunBriteTV SB-CM-T-L-BL ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Inte kategoriserad SunBriteTV Manualer

SunBriteTV SB-WM-ART2-L-BL Bruksanvisning

19 September 2024

SunBriteTV SB-WM-ART1-M-BL Bruksanvisning

19 September 2024

SunBriteTV 4600HD SB-DP46XA Bruksanvisning

19 September 2024

SunBriteTV SB-CM-T-L-BL Bruksanvisning

19 September 2024

SunBriteTV SB-WM-F-L-BL Bruksanvisning

19 September 2024

SunBriteTV SB-WM-F-M-BL Bruksanvisning

19 September 2024

SunBriteTV SB-WM-T-M-BL Bruksanvisning

19 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024

Manhattan 461504 Bruksanvisning

27 Oktober 2024

Sungrow SG125HV Bruksanvisning

27 Oktober 2024

Schneider CCT724319 Bruksanvisning

27 Oktober 2024

Technoline WS 250 Bruksanvisning

27 Oktober 2024

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024

Kupper 12152 Bruksanvisning

27 Oktober 2024

JennAir CARBON24L Bruksanvisning

27 Oktober 2024

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024