SuperTooth Roamee Bruksanvisning

Läs nedan 📖 manual på svenska för SuperTooth Roamee (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
INSTALLATION ON HELMET
1. Select the appropriate holders based on the shape of your helmet :ROAMEE
if the surface of the helmet in contact with the holder is too small or
not at enough, choose the large holders.
2. Attach the holder to your helmet, positioning it near your ear in a wayROAMEE
that the directive beam-forming microphone points toward your mouth.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Euro-CB is under license.
Other trademarks and trade names are those of their
respective owners.
Roamee is a Bluetooth® hands-free kit for bicycle helmets. With its two small adhesive holders
provided, the Roamee can be positioned on any bicycle helmet in a matter of seconds.
Roamee is held securely on its holders by a powerful magnet, making it easy to remove from
the helmet if necessary. With its Open Ear Design technology you can communicate safely with
your caller. Thanks to the speaker placement above your ears, you experience absolute comfort
and remain aware of the surroundings for enhanced safety.
The built-in microphone of the Roamee allows phone conversations or intercom
communication between two Roamee devices (second Roamee available as an option).
With its two speakers, you can also listen to your music in stereo, podcasts, and
navigation instructions from your smartphone.
The ergonomics and simplicity of the three buttons on the Roamee allow you to keep
your phone in your pocket.
Bluetooth compliance: Bluetooth® version 5.1
Multipairing: Maximum 8 phones paired /
1 phone connected at a time
Operating range: up to 300 meters (line of sight)
Frequency range: 2.402 - 2.480 GHz
Power: 7.09 dBm EIRP
Battery type: 200 mAh Li-Po
Charging time: 3 hours (depending on charger)
Operating temperature: 0 to 45°C
Charging temperature: 10 to 40°C
DC input: 5VDC 0.1A
Storage temperature: -10 to 60°C
Accessories: 1 USB cable
2 small holders
2 big holders
Optional large foam
ROAMEE - Quick Guide
Hereby, EURO COMMUNICATION EQUIPEMENTS declares that the radio equipment type
BTBIKE is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
http://www.SuperTooth.net/download
Euro Communication Equipements sas
Route de Foix D117
11 500 NEBIAS
FRANCE
CAUTION:
– The disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
– Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of
ammable liquid or gas.
– A battery subjected to extremely low air pressure that may result in an explosion or the leakage of ammable liquid or gas.
WARNING:
To prevent possible hearing damage,
do not listen at high volume levels for long periods.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems).
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government oce, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal.
This product has an embedded, non-replaceable battery, do not attempt to open the product or remove the battery as this may cause injury and
damage the product. Please contact the local recycling facility for removal of the battery. The embedded, non-replaceable battery is designed to last
the life time of the product.
Federal Communications Commission (FCC) Statement
Industry Canada (IC) Statement
15.21
You are cautioned that changes or modications not expressly approved by the part responsible for compliance could void the user’s authority to
operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC/IC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules and Industry Canada licence-exempt RSS standard(s) Operation is subject to the following two
conditions :
1) This device may not cause interference and
2) This device must accept any interference, including interference that may cause undesired operation of the device.
FCC/IC RF Radiation Exposure Statement :
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specic operating
instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Right ear sideLeft ear side
Secure the wire under the helmet foam
OPTIONAL FOAM INCLUDED
• For better wind noise reduction
at high speeds or in strong wind
conditions, insert the optional foam
over the standard foam cover.
MSBIKE-EN V2.1

The power delivered by the charger must be between min 0.5 Watt required by the radio equipment,
and max 0.5 Watts in order to achieve the maximum charging speed.
Compatible with any standard USB charger
1. PAIRING ROAMEE TO A BLUETOOTH MOBILE PHONE :
Main Button LED From OFF, press and hold until ashes red/blue.
ROAMEE R0… On your phone, enable Bluetooth function then search for
ROAMEE LED When is paired, blinks
blue
every 2 seconds.
2. PHONE USE :
• Answer : Main button Short press to accept the call.
• End call : Main buttonShort press to end the call.
• Reject call : Main buttonLong press until the rst beep.
• Redial : Main buttonDouble short press .
• Voice Assistant : Main buttonShort press to activate (when not in a call).
3. ADJUST VOLUME :
Short press to adjust volume. Beep indicates max / min volume.VOL + / VOL -
4. MUSIC STREAMING :
• Play / Pause : Main ButtonPress until the 2nd beep (3s).
• Next / Previous : VOL + / VOL - Press until the rst beep.
5. POWER ON/OFF ROAMEE :
Main Button Press until LED blinks
blue
and ascending tone can be heard.
Main Button Long press until LED blinks red and descending tone can be heard.
INTERCOM USE (up to 2 Roamee)
1. PAIRING INTERCOM :
Main button LED / From OFF, press and hold on each unit until ashes red blue.
one VOL + and VOL - Then, on of the two units, long press on simultaneously (3s)
until the 2nd beep.
LED When both units are paired, both turn blue and intercom is connected.
2. DISCONNECT INTERCOM :
Press until the (1.5s) to disconnect intercom.Main button rst beep
3. RECONNECT INTERCOM :
Press until the (1.5s) to connect intercom.Main button rst beep
AUTOMATIC INTERCOM RECONNECTION AND AUTO-POWER OFF FUNCTIONS :
When intercom connection is lost, each will try to reconnect automatically. ROAMEE
After 10 minutes, needs to be reconnected manually.ROAMEE
• ROAMEE If no device is found, the will automatically switch o after 5 minutes.
4. CHARGING ROAMEE UNIT :
Connect a USB type-C cable into the charger connector.
The will turn while charging.LED red
The will turn once the battery is fully charged.LED green
Charger connector
VOL - / Previous
Power/Answer/
Play/Pause
LED indicatorHolder slot
Mic
VOL + / Next
Main Button
5. RESET AND ERASE PAIRINGS :
• From OFF, long press at the same time until all three buttons ROAMEE turns ON
and will blink twice and turn o.LED purple
( : All paired devices will be deleted.)Note
Right speaker
Left speaker

Produktspecifikationer

Varumärke: SuperTooth
Kategori: Inte kategoriserad
Modell: Roamee

Behöver du hjälp?

Om du behöver hjälp med SuperTooth Roamee ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad SuperTooth Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer