Swann Indoor Siren Bruksanvisning

Swann Smarth hem Indoor Siren

Läs nedan 📖 manual på svenska för Swann Indoor Siren (3 sidor) i kategorin Smarth hem. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/3

Overview

Thank you for choosing the - the Smart Home Indoor Siren

ideal addition to your Smart Home system. Please take a

moment to familiarize yourself with key parts of the siren.

SMARTHOME-ISVER1E

Smart Home

Indoor Siren Cover

Front

Internal Components

Tamper

Spring Switch

Detects any

unauthorized

removal of the

siren cover,

causing the

siren to sound

Locking

Screw

Secures the

front cover to

the siren

ON/OFF

Switch

Connect

Button

Mounting

Holes x 4

Status LED

Battery

Compartment

Requires 4 x

"D" alkaline

batteries

(included)

QUICK START GUIDE EN

Security Made Smarter

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) This device must accept

any interference received, including interference that may cause undesired operation.

Battery Safety Information

Caution: Keep batteries away from small children. Risk of explosion if battery is replaced by an

incorrect type. Dispose of used batteries promptly in accordance with local regulations.

Correct Disposal of this Product

This marking indicates that this product should not be disposed with other household

wastes throughout the EU. To prevent possible harm to the environment or human health

from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of

material resources. To return your used device, please use the return and collection systems

or contact the retailer where the product was purchased. They can take this product for

environment safe recycling.

Limited Warranty Terms & Conditions

Swann Communications warrants this product against defects in workmanship and material

for a period of one (1) year from its original purchase date. You must present your receipt

as proof of date of purchase for warranty validation. Any unit which proves defective during

the stated period will be repaired without charge for parts or labour or replaced at the sole

discretion of Swann. The end user is responsible for all freight charges incurred to send the

product to Swann’s repair centres. The end user is responsible for all shipping costs incurred

when shipping from and to any country other than the country of origin.

The warranty does not cover any incidental, accidental or consequential damages arising from

the use of or the inability to use this product. Any costs associated with the fitting or removal

of this product by a tradesman or other person or any other costs associated with its use

are the responsibility of the end user. This warranty applies to the original purchaser of the

product only and is not transferable to any third party. Unauthorized end user or third party

modifications to any component or evidence of misuse or abuse of the device will render all

warranties void. By law some countries do not allow limitations on certain exclusions in this

warranty. Where applicable by local laws, regulations and legal rights will take precedence.

tech@swann.com

support.swann.com

USA & Canada 1800 627 2799 Australia 1800 788 210

UK & Europe 0808 168 9031 New Zealand 0800 479 266

Need Help?

CE marking on this product represents the product is in compliance with all directives

that are applicable to it.

Preparing the Siren Connecting the Siren Testing the Siren Mounting the Siren

Loosen the locking screw located at the top of the siren and

then remove the cover.

1 From the Smart Home web portal, click or tap

My Settings > Sirens > add device. The System

Setup screen is displayed and your Smart DVR/Hub

automatically goes into pairing mode.

Note: You can skip this step if the System Setup screen is

already displayed (during the Smart DVR/Hub registration

process, or when you are setting up other smart home

accessories).

2 Slide the siren's switch to the position.ON/OFF ON

3 Press and hold the siren's button until the status Connect

LED blinks once. When the siren has paired with your

Smart DVR/Hub, the status LED blinks twice.

4 Follow the on-screen instructions to complete the setup.

Before mounting the siren at the desired location, it is

important that you test the siren to ensure that it is within

effective wireless range of the Smart DVR/Hub from the

selected mounting position.

CAUTION

The siren is extremely loud! When testing the siren, protect

your hearing by wearing earplugs, or stand at least 3 meters

away from the siren.

To test the siren once it has been connected:

1. Arm your Smart Home system in Away mode. Wait for the

entry/exit delay (default is 20 seconds, unless conﬁgured

differently) to be over.

2. Trigger the siren alarm using one of these methods:

• opening a door where an entry sensor is installed

• walking in front of a motion sensor

3. To turn off the siren alarm, disarm your Smart Home

system by setting it to Home mode.

Note: Please ensure the siren is tested for connectivity before

permanent mounting.

Choose a central location in your home to place the siren

which mounts to any ﬂat wall surface. Before mounting the

siren, make sure that the siren is switched off ﬁrst by sliding

the switch to to prevent it from sounding if you ON/OFF OFF

inadvertently activate the tamper switch.

• Secure the siren onto the wall through the mounting

holes in the four outermost corners of the siren base

using appropriate wall plugs and screws for the wall

surface.

• Remember to turn on the siren by sliding the ON/OFF

switch to before replacing the siren cover. ON

• The siren's tamper protection function is only enabled

5 minutes after the siren is powered up. This gives

you enough time to replace the cover properly without

triggering the tamper alarm.

Connect Button

ON/OFF Switch

The siren is not pairing with my Smart DVR/Hub

Switch the siren off, then on again after 30 seconds. Then, try pairing the siren again.

The siren is ofﬂine

• An internet service outage may have occurred. Check to make sure that your broadband router is working properly and you are

able to access the internet with your other electronic devices. Once your internet service is back up, the siren will automatically

rejoin the system.

• The siren is running low on battery power. You can check the siren's battery status via the Smart Home portal. If a Low Battery

symbol is shown, replace the batteries in the siren with four fresh "D" alkaline batteries immediately.

Troubleshooting

Produktspecifikationer

Varumärke:	Swann
Kategori:	Smarth hem
Modell:	Indoor Siren

Behöver du hjälp?

Om du behöver hjälp med Swann Indoor Siren ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Smarth hem Swann Manualer

Swann Indoor Siren Bruksanvisning

22 Augusti 2024

Smarth hem Manualer

Nyaste Smarth hem Manualer

WiZ Smart Bruksanvisning

14 Januari 2025

Ezviz DL03 Bruksanvisning

14 Januari 2025

Ezviz DL04 Pro Bruksanvisning

14 Januari 2025

Ezviz CP5 Bruksanvisning

14 Januari 2025

Kogan KASHTAGSM2A Bruksanvisning

9 Januari 2025

Elro FZ5002611R Bruksanvisning

5 Januari 2025

Rademacher DuoFern Funksender UP 9497 Bruksanvisning

5 Januari 2025

IKEA INSPELNING 805.698.42 Bruksanvisning

4 Januari 2025

Ezviz DL04 Bruksanvisning

2 Januari 2025

Bticino F522 Bruksanvisning

31 December 2025