Swann SW351-WLA Bruksanvisning

Läs nedan 📖 manual på svenska för Swann SW351-WLA (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
1
Operating Instructions
Anti-Flood
Alarm
SW351-WLA
Advanced security made easy
222
About
2
Do not • expose any part of the alarm unit to any sudden shocks (such as being
dropped or struck).
Do not• install any the alarm unit in direct sunlight.
Use only alkaline batteries.•
The alarm unit is for indoor use only.• Do not install the alarm unit itself
outdoors.
Replace the batteries in the unit every six months.•
Test the alarm periodically• (every 1 - 2 months and each time you change
the batteries) to ensure it is working properly.
Keep this operating instruction booklet in a safe place.•
Technical Specifications
Power Requirements 2 x Alkaline AAA Batteries (3V DC)
Siren Volume > 110dB
Siren Duration Continuous
Siren Power Consumption < 80mA
Power Test Button
Alarm LED
Siren
Sensor Cable
Power LED
Battery Compartment
Electrodes
Sensor
3
Installing and Operating the Alarm Unit
3
Congratulations on your purchase of this anti-flood alarm from ! Once you’ve
got the alarm installed, it will provide you with advanced warning of flooding,
spillage, or any other water-based incident, giving you more time to react in an
emergency, and more piece of mind in the mean time.
Some examples of how this alarm could be used include:
Monitoring a basement for flooding•
Detecting overflow in a laundry, bathroom or similar environment•
Warning when a sink or bathtub is about to overfill•
Installation:
The alarm will sound when the sensor is exposed to water, so you should place the
sensor at the level the water will be when you want the alarm to sound. Typically,
this will be just above the level of the floor, but this depends on your needs.
Affix the alarm unit to the wall, using the double-sided tape provided and 1.
simply let the sensor hang down to the level you want the alarm to be sensitive
to.
If there is an exact level of water you want to detect, you can fix the sensor in 2.
place using tape, glue or any other method you wish. Be sure to leave both
electrodes exposed - if water can’t make contact with them both at the same
time then the alarm will not function.
How it works:
The water sensor consists of two small electrodes, mounted on a water resistant
cable. These two electrodes on the sensor will detect the small increase in
conductivity which occurs if they are exposed to water.
The electrodes use a very low current, and are harmless.
Remember that the sensor doesn’t need to be fully immersed in water to be
triggered. Simply being sufficiently wet (such as being exposed to rain or particularly
moist environments) can provide enough conductivity to trigger the sensor, as can
the electrodes touching metal or other conductive materials.
We suggest, therefore, that mounting the sensor somewhere under cover (or at
least somewhat sheltered) is the most practicable option. Places such as a basement
or underneath floorboards can be a good option, as the alarm will notify you
before your home floods!

Produktspecifikationer

Varumärke: Swann
Kategori: Inte kategoriserad
Modell: SW351-WLA

Behöver du hjälp?

Om du behöver hjälp med Swann SW351-WLA ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Swann Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer