Swann SWADS-WVDCM1 Bruksanvisning

Swann Dörrklocka SWADS-WVDCM1

Läs nedan 📖 manual på svenska för Swann SWADS-WVDCM1 (2 sidor) i kategorin Dörrklocka. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
© Swann Communications 2018
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
WARNING: Modifications not approved by the party responsible for compliance could void user’s authority to
operate the equipment.
Battery Safety Information
Replace batteries at the same time. Do not mix new and old batteries or battery types (for example, alkaline and
lithium batteries). Keep batteries out of reach of children. Dispose of used batteries promptly in accordance
with local regulations.
CE marking on this product represents the product is in compliance with all directives that are applicable to it.
Correct Disposal of This Product. This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for environment safe recycling.
QSGWVDPCMVER1E
ENGLISH
Chime Accessory
QUICK START GUIDE
For Smart Video Doorbell Security System
Chime Overview Chime Setup
LED light
Chime melody button
(36 melodies available)
Pairing button
Volume button
Speaker (back)
Battery cover (back)
The Chime accessory is a battery-powered indoor speaker that monitors for signals coming
from your Smart Video Doorbell, and plays a melody when the front button of your Smart
Video Doorbell is pressed.
VOL CODE
Installing batteries & Pairing the Chime
1. To install batteries, open the battery cover on the back of the Chime and insert two
new, high quality "AA" alkaline batteries, matching the polarity markings (+ and -)
shown inside the battery compartment. Snap the battery cover back into place.
2. To pair with your Smart Video Doorbell, briefly press the Chime's button, and CODE
then press the button on the front of your Smart Video Doorbell within 10 seconds.
You'll hear the default chime melody as confirmation.
Melody selection
To select a different melody, press the button repeatedly to cycle through all the available
sounds. Stop when you hear something you like. There is no need to confirm your selection.
Volume control
To adjust the volume, press the button repeatedly until the desired volume is obtained. VOL
You can also completely turn off both sound and LED light.
Mounting the Chime
1. Insert the supplied screw (depending on the surface type, use a wall plug if needed)
into the wall at the desired location, leaving it protruding slightly.
2. Hang the Chime on the screw through the keyhole slot on the back of the Chime and
then slide the Chime down to ensure it sits firmly on the screw.

Produktspecifikationer

Varumärke: Swann
Kategori: Dörrklocka
Modell: SWADS-WVDCM1

Behöver du hjälp?

Om du behöver hjälp med Swann SWADS-WVDCM1 ställ en fråga nedan och andra användare kommer att svara dig




Dörrklocka Swann Manualer

Dörrklocka Manualer

Nyaste Dörrklocka Manualer