Synamodec Dementor Bruksanvisning

Synamodec Inte kategoriserad Dementor

Läs nedan 📖 manual på svenska för Synamodec Dementor (1 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/1
2
3
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24 25 26 27 28
FILTER CONTROLS
Level 1 input level 1
Level 2 input level 2
Resonance control
Cut-o control
Rate for resonance modula on
Rate for cut-o modula on  
Mod, lfo output level for resonance
Mod, lfo output level for cut-o
1.2 Eq / lter bass
3.4 Eq / lter media
5.6 Eq / lter treble
Level, input level to nuances and device output
Feedback, input level to nuances taken from the output of this
Rate lfo for me modula on of the echo / delay (paranormal)  
Mod, lfo output level for me modula on  
To Paranormal, send the output signal nuances to the OUT
or eco / delay (paranormal)
Level Processor entry level
Time, delay me control
Echo level, eect level
Repeat, control of number of repe ons (echo) 
OUT, device output
IN 1,2, inputs to device
ON / OFF switch
28v dc power input
INSTRUCTIONS
1. Set all pots to zero, cut-o at 12, Time at 12 and the To Paranormal switch on the le .  
2. Plug two di erent inputs (for example one square wave and one white noise). This
device can accept signals maximum of 10Vpp,
3. Plug the Out jack to your mixer.
Lets play!
1. Increase the input levels as well as the level of the nuances. Now, you can hear the
output signal. Manually play with the Cut-o and Resonance pots.
2. Cut-o and Resonance can be managed by the LFOs.
3. Increase the level of the Nuances pots one by one and reset them to zero. You will
appreciate how work the six pots (1,2,3,4,5,6).
a. 1,2 will enhance the bass
b. 3,4 the mids
c. 5,6 the treble,
4. You can also apply the level of feedback that you like, keep in mind that if the signal is
very enhanced with the nuances, especially the bass, increasing the feedback. To much
satura ons will produce strange signals.
5. Repeat this procedure using other signa, (white noise, synth pad, etc.)
6. The Switch to paranormal send the signal to the Eco / delay sec on. Time parameter
can be LFO modulated .
2
3
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25 26
27
28

Produktspecifikationer

Varumärke: Synamodec
Kategori: Inte kategoriserad
Modell: Dementor

Behöver du hjälp?

Om du behöver hjälp med Synamodec Dementor ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Synamodec Manualer

Synamodec

Synamodec Dementor Bruksanvisning

6 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Smeg

Smeg KIT6CX Bruksanvisning

24 December 2024
Smeg

Smeg GTA-6 Bruksanvisning

24 December 2024
Lucide

Lucide Casper i 79166/19/12 Bruksanvisning

24 December 2024
Lucide

Lucide Merlina 78193/30/66 Bruksanvisning

24 December 2024
Lucide

Lucide Pippa 77583/81/30 Bruksanvisning

24 December 2024
Lucide

Lucide Pia 45380/04/30 Bruksanvisning

24 December 2024
Lucide

Lucide Pia 45280/01/30 Bruksanvisning

24 December 2024
Lucide

Lucide Anaka 45179/03/30 Bruksanvisning

24 December 2024
Lucide

Lucide Zych 45156/01/97 Bruksanvisning

24 December 2024
Lucide

Lucide Robin 34539/81/41 Bruksanvisning

24 December 2024