Tanita 1210N Bruksanvisning

Tanita Diverse 1210N

Läs nedan 📖 manual på svenska för Tanita 1210N (4 sidor) i kategorin Diverse. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
CONTENTS
MODEL1210N
MODE CAL TARE ON/OFF
max.100ctd=0.01ct0.64ozt
d=0.0001oz
t308grd=
0.05gr20gd=0.002g
MODEL1210N
MODE
CAL TARE
ON/OFF
max.100ctd=0.01ct0.64oztd=0.0001ozt308grd=0.05gr20gd=0.002g
MODEL1210N
MODE CALTARE
ON/OFF
max.100ctd=0.01ct0.64oztd=0.0001ozt308grd=0.05gr20gd=0.002g
MODEL1210N
MODE
CALTAREON/OFF
max.100ctd=0.01ct0.64oztd=0.0001ozt308grd=0.05gr20gd=0.002g
MO
DEL
121
0N
MODE
CAL TARE
ON/OFF
GB
USA
GB
USA
IMPORTANT
1. Use in location where there is little vibration.
2. If the change in temperature exceeds 5¡C (10¡F), wait at least 30 minutes before use.
3. Use on a hard flat surface.
4. Keep the cover closed when weighing.
5. Do not dismantle.
6. Clean using mild detergent. Chemicals should not be used.
Cover
Weighing tray
LCD display
Key buttons
Test weight
Lock release button
 Gem cup
Lo battery mark
Stable mark
Minus sign
  Calibration mark
Weighing modes
  ON/OFF button
TARE button
CALIBRATION button
MODE button
AC adaptor inlet
WEIGHING
CALIBRATING
1. Turn on the scale, and press the CAL button.
2. The display shows CALIb and then will flash CALIb .
3. Place the included test weight on the weighing tray. The scale will calibrate automatically.
4. The following messages will appear one after another;
CALIb End 20.000g→ →
5. Calibration is completed. Remove the test weight.
Calibration is not completed when showing Err . Repeat calibration procedure.
PROGRAMMING AUTO POWER OFF
Default setting is 10 minutes.
The auto power off time can be programmed between 0 (=no auto power off) to 60
minutes by 10 minutes according to preference.
Press MODE button and ON/OFF button simultaneously when the uni t is turned off.
The unit will then show the current setting.
1. Press TARE button to increase the length (the figure goes up by 10 minutes) and press
CAL button to decrease.
2. Press MODE button to set.
TECHNICAL SPECIFICATIONS
BEFORE USE
(Fig.1) (Fig.2)
Whenusingwithbatteries.
1.Pressthelockreleasebutton(Fig.1).
2.Removethebatterycoverandinsert4sizeAAA(LR03)batteriesasshowninFig.2.
3.Replacethebatterycover.
WhenusingwithACadaptor.
1.DonotuseanyACadaptorexceptthosewiththefollowingspecification.
NAMES OF PARTS

 


2.TouseACadaptor,puttheDCjackintotheinletasintheabove.
Before measuring, we recommend you to carry out a calibration. ( see
"CALIBRATING")
1. Press the lock release button to open the cover (Fig.3).
2. Press the ON/OFF button to turn on the scale. Th e display will flash,
and wh en the display shows "0." and Stable mark, the scale is ready for
use.
3. Place the object to be weighed on the tray.
*If using the gem cup, remove the tray.
4. The object’s weight will be displayed.
5. In order to subtract the weight of the vessel or container, press the TARE button. "0." will
appear on the display, and when an object is placed on the scale, the weight of that object
only will be displayed.
6. In order to change the units of measurement, press the MODE button.
The units will change in the following order: g ct ozt grain→ →
7. When you have finished weighing, press the ON/OFF button to tur n off. The scale will turn
off automatically after ten minutes of inactivity.
8. When not in use, close the cover and push back until it locks.
*If you used the gem cup, remove it and put the weighing tray back in place.
"EEEEE" :Over Load. The object being weighed exceeds the maximum weight.
(Fig. 3)
Test weight
Capacity
Graduation
Power
Power Consumption
20g
20g / 100ct / 0.64ozt / 308gr
0.002g / 0.01ct / 0.0001ozt / 0.05gr
DC6V AAA(LR03) × 4 (included)
AC adaptor (DC6V 200m A) (Whenusingwith
12mA (max.)
*Not legal for trade.
OnlyuseanACadaptorwithaCEmarking.
Push
Open
Push
−
−

Produktspecifikationer

Varumärke: Tanita
Kategori: Diverse
Modell: 1210N

Behöver du hjälp?

Om du behöver hjälp med Tanita 1210N ställ en fråga nedan och andra användare kommer att svara dig




Diverse Tanita Manualer

Diverse Manualer

Nyaste Diverse Manualer