Targus PACD010U Bruksanvisning

Läs nedan 📖 manual på svenska för Targus PACD010U (11 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/11
Visit our Website at www.targus.com
Features and specifications subject to change without notice.
© 2007 Targus Group International, Inc. and Targus, Inc.
PACD010U_PACD020U / 410-0934-001C
30
LISTED ACCESSORY
Thank you for purchasing the Targus USB 2.0 CD-ROM Slim External
Drive that allows you to read audio and data CDs. After installing the
Targus drive, you can use it at any time by connecting the supplied
Universal Serial Bus (USB) Y-cable to your computer’s USB ports.
This users guide describes how to connect and operate the Targus
drive. In addition to this user’s guide, this package contains:
Targus USB 2.0 CD-ROM Slim External Drive
• USB Y-cable
To use the Targus drive, your computer must meet the following
hardware requirements and run one of the operating systems listed
below.
Hardware
• PC with an Intel® Pentium® processor or equivalent and a hard
disk drive
• 64 MB RAM or higher, depending on the operating system
Two (2) USB 1.1 or 2.0 interface ports
NOTES: When connected to USB version 1.1 ports, the drive’s performance level will
be less than optimal. For best results, connect the driver to USB version 2.0 ports.
1
Targus USB 2.0 CD-ROM Slim External Drive
The Targus drive receives its power from your computer’s USB ports. You must have a
minimum of two USB ports to use the drive, they must be in full compliance with the
USB specifications and supply a minimum of 5V/500mA of power.
Operating System
• Windows® 2000/XP
• Windows Vista™
Connecting the Drive and Installing the Drivers
NOTES: Installing the Targus drive may change internal drive letter assignments.
You can connect the Targus drive to your computer via a hub or port replicator as long
as the device has its own AC power adapter.
The Y-cable that connects the Targus drive to your computer has two
USB type A connector ends, one single and one with a USB pass-
through.
The connector with the USB pass-through supports upstream and
downstream data flow between your computer and supported devices
connected to the pass-through connector and provides power to the
drive. The single connector supports upstream and downstream data
flow between the drive and your computer and also provides power to
the drive.
CAUTIONS: Avoid connecting a high power device, such as a printer or scanner, to your
computer via the Y-cable’s pass-through end as the device may not work properly
and/or cause the Targus drive to stop working temporarily. For best results, connect
only low power devices, such as a mouse or keyboard, to the passthrough end.
If using a USB hub or port replicator, the USB ports on the device must provide at least
500 mA, per port, for the Targus drive to work properly. Also, for best results, turn off
any high power devices on the hub or port replicator while using the drive.
2

Produktspecifikationer

Varumärke: Targus
Kategori: Inte kategoriserad
Modell: PACD010U

Behöver du hjälp?

Om du behöver hjälp med Targus PACD010U ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Targus Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer