Techno Line WS 7394 Bruksanvisning

Techno Line Väderstation WS 7394

Läs nedan 📖 manual på svenska för Techno Line WS 7394 (13 sidor) i kategorin Väderstation. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/13

WEATHER STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this state-of-the-art weather station as an

example of innovative design and quality piece of engineering. Providing

radio controlled time, date, calendar, indoor and outdoor temperature,

indoor relative humidity, and air pressure history information. This unit will

never keep you guessing on current and future weather conditions.

Operation of this product is simple and straightforward. By reading this

operating manual, the user will receive a better understanding of the

Weather Station together with the optimum benefit of all its features.

FEATURES:

The Weather Station

Hanging hole

LCD Display

Battery

compartment

Function

keys

Stand

• DCF Radio controlled time with manual setting option

• Time reception ON/OFF (user selectable)

• 12/24 hour time display

• Time zone option ±12 hours

• Weekday and day calendar display (year and month only in setting

mode)

• Weather forecasting with weather tendency indicator

• Indoor comfort indicator

• Temperature display in ºC/ºF

• Indoor and outdoor temperature display with MIN/MAX records and

time of reception

• Indoor humidity display as RH% with MIN/MAX records

•

Relative air pressure hPa/ inHg with adjustable reference value

Weather icon sensitivity setting

Relative air pressure history for the past 12 hours (electronic

barometer with barometric pressure trend)

• LCD contrast selectable

• Can receive up to 3 outdoor transmitters

• Low battery indicator

• Table standing or wall mounting

The Outdoor Temperature Transmitter

Battery cover

• Remote transmission of outdoor temperature to weather station by

433 MHz signal

• LCD showing current temperature

• Rain proof casing

• Wall mounting case

TO INSTALL AND REPLACE BATTERIES IN THE WEATHER

STATION

The Weather Station uses 2 x AA, IEC LR6,

1.5V batteries. To install and replace the

batteries, please follow the steps below:

1. Insert finger or other solid object in the

space at the bottom center of the battery

compartment and lift up to remove the

cover.

2. Insert batteries observing the correct

polarity (see marking).

3. Replace compartment cover.

TO INSTALL AND REPLACE BATTERIES IN THE

TEMPERATURE TRANSMITTER

The Temperature Transmitter uses 2 x AAA,

IEC, LR3, 1.5V batteries. To install and

replace the batteries, please follow the steps

below:

1. Unscrew the screw on the back of the

compartment and remove the cover.

2. Insert the batteries, observing the

correct polarity (see marking).

3. Replace the battery cover on the unit

and seal by re-screwing.

Note:

In the event of changing batteries in any of the units, all units need to be

reset by following the setting up procedures. This is because a random

security code is assigned by the transmitter at start-up and this code must

be received and stored by the Weather Station in the ﬁrst 3 minutes of

power being supplied to it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis

to ensure optimum accuracy of these units.

Please participate in the preservation of the environment.

Return used batteries to an authorized depot.

SETTING UP

1. First, insert the batteries into the Weather station (see “How to

install and replace batteries in the Weather station” above).

Once the batteries are in place, all segments of the LCD will light up

briefly. Then the indoor temperature and humidity, the time as 0:00

the date as TH.1., the weather icons (sun and clouds) will be

displayed. If the indoor temperature and humidity are not displayed

after 15 seconds, remove the batteries and wait for at least 1 minute

before reinserting them. Once the indoor data is displayed proceed

to step 2.

2. Within 3 minutes of activating the Weather station, place the

batteries into the transmitter (see “How to install and replace

batteries in the Temperature transmitter“ above).

3. After inserting the batteries into the transmitter, the Weather station

will start receiving data from the transmitter. The outdoor

temperature data should then be displayed on the Weather station.

If this does not happen after 3 minutes, the batteries will need to be

removed from both units and reset from step 1.

4. The Weather station can take up to 3 remote transmitters. If you

have purchased additional transmitters, follow step 2 for all extra

transmitters. However, ensure that you leave 10 seconds in between

the reception of the last transmitter and the set-up of the following

transmitter. The Weather Station will number the transmitters in the

order of set-up, i.e. the first transmitter will have the temperature and

humidity displayed with the number 1 against it and so on.

5. After all the transmitters are set up, there is a testing period, during

which the display switches quickly between all the received

transmitters at random, according to which random transmission it

receives. The process will stop automatically if no keys are pressed

for a few minutes.

6. Once the remote data have been received and displayed on the

Weather station, the DCF-77 time code reception is automatically

started. This takes typically between 3-5 minutes in good conditions.

This time period is an excellent opportunity to locate the

transmitter(s) in suitable location(s) outdoors. In order to ensure

sufficient 433MHz transmission however, this should under good

conditions be no more than 100 meters from where the Weather

station will be finally positioned (see notes on “Positioning” and

“433MHz Reception”).

7. If after 10 minutes, the DCF time has not been received, use the

SET key to manually enter a time and date initially. The clock will

automatically attempt to receive the DCF time at each full hour.

When this is successful, the received time will override the manually

set time. The date is also updated with the received time. (Please

refer also to notes on “Radio controlled Time Reception” and

“Manual Time Setting”).

Note:

In the event of changing batteries of the units, ensure the batteries do not

spring free from the contacts. Always wait at least 1 minute after removing

the batteries before reinserting, otherwise start up and transmission

problems may occur.

RESETTING

The Weather Station and the Temperature transmitter need to be reset

when one of the following conditions occur:

• Unsuccessful 433MHz signal reception.

• Malfunction on the units.

• Batteries replacement.

For resetting, remove all batteries from the units. Wait at least for 1 minute

before powering up the Weather Station again. Proceed from step 1 in

“Setting Up”.

DCF RADIO CONTROLLED TIME

The time base for the radio controlled time is a Cesium Atomic Clock

operated by the Physikalisch Technische Bundesanstalt Braunschweig

Produktspecifikationer

Varumärke:	Techno Line
Kategori:	Väderstation
Modell:	WS 7394
Färg på produkten:	Zwart
Vikt:	2000 g
Bredd:	188 mm
Djup:	58.4 mm
Höjd:	193 mm
Användarmanual:	Ja
Strömförsörjning:	100 - 240V/ 1.2 A/ 50-60Hz
Fjärrkontroll:	IR
Ljudformat som stöds:	AAC, AC3, MP3, OGG, PCM, WMA
Anslutningsteknik:	Bedraad en draadloos
Videokomprimeringsformat:	AVI, DivX, MPEG, MPG, Xvid
Inkluderar AC-adapter:	Ja
Antal USB 2.0-portar:	3
Antal HDMI-portar:	1
Antal Ethernet LAN (RJ-45)-portar:	1
Certifiering:	UL, cUL, CE
Analog signalformat:	NTSC, PAL
Gränssnitt:	USB
Ljud (L,R) ut:	1
Inkluderad programvara:	Roxio Easy Archive\nRoxio Back Up My PC\nPC Tools Antivirus\nPC Tools Antispyware
Kompatibla operativsystem:	Windows XP/Vista
Nätverksprotokoll som stöds:	TCP/IP
Kompositvideoutgång:	1
HDD kapacitet:	1000 GB
HDD-gränssnitt:	SATA
HDD rotationshastighet:	7200 RPM
S-videoutgång:	1
Digitalt ljud, koaxialutgång:	1
DHCP-klient:	Ja
Mått (B x D x H):	188 x 58.4 x 193 mm
HDD storlek:	3.5 "
Fjärrkontroll ingår:	Ja
Överföringshastighet:	10 Mbit/s
Enhet, buffertstorlek:	16 MB
Wifi:	Ja
DC-in krav:	12V/ 3A