Texas Instruments TI-Navigator 3.2 Bruksanvisning

Texas Instruments Kalkylator TI-Navigator 3.2

Läs nedan 📖 manual på svenska för Texas Instruments TI-Navigator 3.2 (2 sidor) i kategorin Kalkylator. Denna guide var användbar för 13 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

(1) AC9930 Power Adapter for

Access Point or Network Hub

Student Kit

(4) Network Hubs (1) Charging Bay

(4) Network Hub Clamps

(16) Data Cables

(1) AC9940 power adapter for

charging bay

(4) Network Connectors

The TI-Navigator™ System Overview

Access Point connects to teacher’s computer

through USB cable.

Charging Bay charges network hubs

when they are not in use.

Continued on back

education.ti.com/support

ti-navigator@ti.com

1-866-TI NAVIGATOR

(1-866-846-2844)

education.ti.com/support

ti-navigator@ti.com

1-866-TI NAVIGATOR

(1-866-846-2844)

Unpack the Parts

(2) CD-ROMs containing

software and activities

Installation Guide and

Reference Guide

(1) AC9930 Power Adapter for

Access Point or Network Hub

(1) USB Silver Edition Cable

(1) Access Point

(shown with antenna extended) (1) USB Cable

Classroom Kit

Network Hubs communicate with access point.

TI calculators connect to hubs.

AC9940

Important!

Contact TI for additional help

On the Web

By e-mail

By phone

•

The teacher’s computer must have Windows® Vista

Ultimate, Home Premium, Business, or Pro editions

installed; or Windows® XP Professional (with

Service Pack 1, 2, or 3); or Windows® 2000 (with

Service Pack 4) operating system installed.

•

You must have administrative rights to install

software on the computer.

• Before installing TI-Navigator™ software, you must

install TI Connect™ 1.6 from the CD.

• You must upgrade the operating system on your

TI calculators to 1.19 or higher (TI-83 Plus), 2.41 or

higher (TI-84 Plus), or 1.90 or higher (TI-73

Explorer™). For more information, see the

Installation Guide.

•

For detailed set-up instructions, see the Installation

Guide. For quick access to information while using

the software, see the TI-Navigator™ Reference

Guide or the TI-Navigator™ Help.

Texas Instruments

7800 Banner Dr.

Dallas, Texas 75251

NAV/PO/1L1/G

Reference Guide

TI-Navigator ™

TI-Navigator™ 3.2

Getting Started

AC9930

6 7

TI-Navigator™ 3.2 Getting Started poster

Assemble and charge the hubs

Hub batteries are already charged when shipped, but you should charge them overnight before use.

Use AC9940 power adapter to plug

charging bay into a power outlet.

Place hubs in charging bay

to recharge.

Connect network connectors onto hubs.

Or you may use the

AC9930 power adapter

to charge individual

hubs in a power outlet.

TI-Navigator™ System ID

48z6-co2j-cyms-qol2x

(Sample)

Activate access point and hubs Reminders and next steps

For detailed instructions, see the Installation Guide.

2 3 4

AC9940

AC9930

USB Cable

LEDs

Reset

Install TI-Connect™ and

TI-Navigator™ software

a) Insert the software installation CD in the

CD-ROM drive.

b) When the window opens, click the Computer

Software button, and install TI-Connect™ 1.6

software on the computer.

c) Restart your computer, and open the CD again.

d) Next, click TI-Navigator™ Software, and follow

the instructions on the screen. Click Install

TI-Navigator to install the software.

d) When the installer program asks for it, type the

System ID for your TI-Navigator™ system. You

can find the System ID inside the CD case.

e) Wait and follow the instructions on the screen.

Please follow all the steps as instructed on the

screen. This poster provides an overview; the

Installation Guide provides details.

a) When you are prompted to start the Network

Setup wizard, click OK.

b) Follow the instructions on the screen. Click

Next or Finish as you complete each screen in

the wizard.

c) Plug the power adapter into the Access Point.

For detailed instructions, see the Installation Guide.

Set up your network

a) Continue to follow the instructions on the

screen.

b) Connect the USB cable to the access point.

c) Plug the access point’s power adapter into a

power outlet.

d) Connect the USB cable from the access point

to the computer’s USB port.

AC9930 Power Adapter

AC9930

Set up your network (continued)

• For detailed set-up instructions, see the Installation Guide.

• The driver for the USB Silver Edition cable is included on the

TI-Navigator™ software installation CD.

• Four required Apps must be installed on all the calculators on

the TI-Navigator™ network: NavNet, θAlgACT, θnavstk, and

LearnChk. Use the App Transfer utility under the Tools tab in the

TI-Navigator™ software.

• LearningCheck Creator is an important software tool included on

the CD. You must install it separately from the other software.

• You must upgrade the operating system on your TI calculators

to 1.19 or higher (TI-83 Plus), 2.41 or higher (TI-84 Plus), or 1.90

or higher (TI-73 Explorer™). See the Installation Guide for more

information on upgrading the calculator operating system. (An

operating system may take ten minutes per calculator to transfer

and install.)

• For quick access to information while using the software, see

the TI-Navigator™ Reference Guide or the TI-Navigator™ Help.

a) Follow the wizard’s instructions to activate the

access point.

b) Next, you will add the hubs. When prompted,

insert a ball point pen into the hole at the back of

each hub to press and hold the Reset button.

The hub’s LEDs begin to flash amber.

c) Hold the Reset button until all three LEDs show

solid amber. This may take up to 10 seconds.

After you reset each hub, it may take a few

seconds for the hub’s ID to be added to the list.

If you see this message while installing,

click Yes. The message does not mean

there is a problem.

Produktspecifikationer

Varumärke:	Texas Instruments
Kategori:	Kalkylator
Modell:	TI-Navigator 3.2
Färg på produkten:	Zwart
Vikt:	428 g
Bredd:	36 mm
Djup:	211 mm
Höjd:	122 mm
Instruktioner:	Ja
Processorfrekvens:	955 MHz
Antal processorkärnor:	1
Vormfaktor:	ATX
Maximal upplösning:	4096 x 3112 Pixels
Antal HDMI-portar:	1
Full HD:	Ja
HDCP:	Ja
HDMI-version:	1.4a
Antal lås:	2
Hållbarhetscertifikat:	RoHS, ENERGY STAR
Integrerad TV-tuner:	Nee
Antal DisplayPorts:	1
Klockhastighetsminne:	5600 MHz
DVI-I-portar:	1
Grafikminne:	2 GB
DisplayPort-version:	1.2
Typ av anslutning:	PCI Express x16
Typ av kylning:	Actief
Grafikprocessorfamilj:	AMD
Grafikprocessor:	Radeon R7 265
Grafikadapter, minnestyp:	GDDR5
Minnesbuss:	256 Bit
OpenGL version:	4.3
DirectX version:	11.2
Shader modellversion:	5.0
Minsta systemströmförsörjning:	600 W
Strömförbrukning (typiskt):	140 W
Stöd för parallell bearbetning:	2-Way CrossFireX
Dual Link DVI:	Ja
Grafikadapter RAMDAC:	400 MHz
Streama processorer:	1024
Maximalt antal visningar per grafikkort:	3
PhysX:	Nee
Ytterligare strömkontakter medföljer:	1x 6-pin
HD3D-teknik:	Ja
Dubbel VGA:	Ja
OpenCL version:	1.2