Total TJSLI8501 Bruksanvisning

Total Sågmaskin TJSLI8501

Läs nedan 📖 manual på svenska för Total TJSLI8501 (13 sidor) i kategorin Sågmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/13
KEYHOLE SAW
2
Security instructions
Caution
Read all safety warnings and all instructions. Failure to follow all warnings and
instructions may result in electrical shock, fire, and/or serious injury.
The term “power tool” in the warnings refers to your operated (corded) power tool mains-
or battery-operated (cordless) power tool.
Note: Save all warnings and instructions for future reference. Due to our ongoing R&D&I program,
the specifications in this document are subject to change without notice.
1) Work area safety
a. Keep the work area clean and well lit to prevent accidents.
b. Do not use power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust that can cause fires.
c. Keep children and other unauthorized persons away while using a power
tool. Distractions can cause you to lose control of the tool.
2) Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way.
Using a suitable plug reduces the risk of electric shock.
b. Avoid bodily contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if
your body is grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electrical shock.
d. Never use the cord to carry, pull or unplug the power tool. Keep the cable
away from heat or oil.
e. When using a power tool outdoors, use an extension cord suitable for
outdoor use.
f. If using the tool in a damp location is unavoidable, use a Residual Current
Device (RCD) protected supply to reduce the risk of electric shock.
3) Personal security
a. Always stay alert, watch what you are doing and use common sense
when using the tool.
b. Do not use a power tool if you are tired or under the influence of
medication or other substances.
c. Wear personal protective equipment. Always wear eye protection.
Protective equipment such as a dust mask, non slip safety shoes, hard -
hat, or hearing protection used in the proper conditions will reduce
personal injury. Also don't wear loose clothing or jewelry.
d. Prevent the tool from turning on unintentionally. Make sure the switch is
in the off position before connecting to power source and moving.
e. Remove any adjusting wrenches or wrenches before turning on the power
tool. An adjustable wrench or wrench placed in a rotating part of the power
tool can cause serious injury.
f. If dust extraction and collection devices (such as a dust mask) are used,
make sure they are connected properly. Properly use these devices and
you will reduce dust related hazards.-
3
4) Use and care of battery tools
a. Recharge the battery only with the charger specified by the
manufacturer. An unsuitable charger can create a fire hazard.
b. Use power tools only with specifically designated batteries. Use of other
batteries may create a risk of injury or fire.
c. When the batteries are not in use, keep it away from other metal objects,
such as paper clips, coins, keys, nails, screws, or other small metal
objects, that can make a connection from one terminal to another.
Shorting the battery terminals can cause burns or fire.
d. Abusive conditions can cause expulsion of liquid from the battery; avoid
contact. If accidentally contacted, rinse immediately with water. If the
liquid comes into contact with the eyes, also seek medical help. Liquid
expelled from the battery can cause irritation or burns.
e. Do not use a battery or tool that is damaged or modified. They may
exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
f. Do not expose a battery or tool to fire or excessive heat. Exposure to fire
or temperature above 130°C may cause an explosion.
g. Follow all charging instructions. Do not charge the battery or tool outside
the temperature range specified in the instructions. Improper charging
or charging at temperatures outside the specified range may damage
the battery or increase the risk of fire.
5) Service
a. Have your power tool serviced by a qualified person and use replacement
parts recommended by the manufacturer. This will ensure that the safety
of the power tool is maintained.
b. Never use damaged batteries. Battery packs should only be serviced by
the manufacturer or authorized service providers.

Produktspecifikationer

Varumärke: Total
Kategori: Sågmaskin
Modell: TJSLI8501

Behöver du hjälp?

Om du behöver hjälp med Total TJSLI8501 ställ en fråga nedan och andra användare kommer att svara dig


Sågmaskin Total Manualer

Total

Total TJSLI8501 Bruksanvisning

17 December 2024
Total

Total TS730301 Bruksanvisning

17 December 2024

Sågmaskin Manualer

Nyaste Sågmaskin Manualer

Global

Global PSL-G 750 Bruksanvisning

17 December 2024
Global

Global N-PSL 750 Bruksanvisning

17 December 2024
Global

Global MTS-G 400 Bruksanvisning

17 December 2024
Global

Global PSG 750 Bruksanvisning

17 December 2024
Turbo-Silent

Turbo-Silent EKS 2040/1 Bruksanvisning

17 December 2024
King Craft

King Craft ZKGS 4300 UG Bruksanvisning

16 December 2024
Fieldmann

Fieldmann FZP 5816-B Bruksanvisning

15 December 2024
Fieldmann

Fieldmann FZP 4216-B Bruksanvisning

15 December 2024
Fieldmann

Fieldmann FDP 200805-E Bruksanvisning

15 December 2024
Fieldmann

Fieldmann FDK 201302-E Bruksanvisning

15 December 2024