Totolink SW24G2 Bruksanvisning

Totolink Växla SW24G2

Läs nedan 📖 manual på svenska för Totolink SW24G2 (1 sidor) i kategorin Växla. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
Hardware Installation Refer to the application scene graph below
Notice
1. The switch should be used indoor only.
2. Use the Power cord comes with the switch.
3. Set the device on a flat surface strong enough to support the entire weight
of the device with all fittings.
4. Don’t place heavy objects on the switch.
Use Ethernet cable to connect router to Switch (LAN port to LAN port)
Use Ethernet cable to connect PC or Laptops RJ45 port to Switch
Plug one end of the power cord into switch’s AC power jack and then
other end to wall socket.
Gigabit Uplink Unmanaged Switch
Quick Installation Guide
Gigabit Uplink Unmanaged Switch
Suitable for: SW24G2
Checking Package Contents
Before Installation Specifications
1* 24+2 Ports Gigabit Uplink Unmanaged Switch
1* Power Cord
1* Quick Installation Guide
2* Mounting Brackets and the fittings
For more information, please go to www.totolink.net
Information in this document is subject to change without prior notice.
Copyright TOTOLINK., All rights reserved.
Router
LEDs 10/100Mbps RJ45 Port
10/100/1000Mbps RJ45 Port
LED Indicators
POWER
LED Indicator
Link/Act
( )1-26
1000Mbps
Status
On
Off
On
Off
On
Off
Description
The switch is powered on
The switch is powered off or power supply is abnormal
The corresponding indicator lights green when connected
to other device, flashes green during data transfer
No device is connected to the corresponding port
The corresponding port is running at 1000Mbps
There is no device linked to the corresponding port or the
port is running at 10Mbps or 100Mbps
1 3
Manufacturer: ZIONCOM ELECTRONICS (SHENZHEN) LTD.
Address: Room 702, Unit D, 4 Building Shenzhen Software Industry Base, Xuefu
Road, Nanshan District, Shenzhen, Guangdong, China
Caution
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment should be installed and operated with minimum distance
20cm between the radiator& your body.
FCC Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio ortelevision reception, which can be determined by
turning the equipment off
Dimensions(L x W x H)
Standards
Interface
Network Media
Power Supply
Backup Bandwidth
MAC Address Table
MAC Address Learning
Transmission Method
LED
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
24*10/100Mbps +2-Port 10/100/1000Mbps auto-negotiation
RJ-45 Ports (Auto MDI/MDIX)
10BASE-T: UTP Cat 3, 4, 5 cable
100BASE-TX/1000BASE-T: UTP Cat 5, 5e or above cable
100~240VAC,50/60Hz,0.6A
8.8Gbps
16K
Auto-learning, Auto-aging
Store-and-forward
1* Power, 26*LANs, 2*1000Mbps
0 ~40 (32 ~104 )℃ ℃ ℉
40 ~70 (-40 ~158 )℃ ℃
10%~90%RH Non-condensing
5%~90%RH Non-condensing
440 x 180 x 44mm

Produktspecifikationer

Varumärke: Totolink
Kategori: Växla
Modell: SW24G2

Behöver du hjälp?

Om du behöver hjälp med Totolink SW24G2 ställ en fråga nedan och andra användare kommer att svara dig




Växla Totolink Manualer

Växla Manualer

Nyaste Växla Manualer