TP Link TL-SG2016P Bruksanvisning

TP Link Inte kategoriserad TL-SG2016P

Läs nedan 📖 manual på svenska för TP Link TL-SG2016P (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

JetStream Gigabit Smart PoE+ Switch

1. To access the management page of the switch, open a browser and type

the switch’s IP address in the address eld, then press the Enter key.

If the switch obtains IP address from the DHCP server (typically a router), nd

the switch’s IP address on the DHCP server.

If not, use the default IP address to launch the switch’s 192.168.0.1

management page.

Note: Make sure the switch and computer are in the same subnet.

2. admin Enter for both the username and password in the lower case letters

to log in. The rst time you log in, change the password to better protect

your network and devices.

3. After a successful login, the main page will appear. You can click the menus

on the top side and left side to congure the corresponding functions.

Note:

1. PoE ports can also connect to non-PoE devices, but only transmit data.

2. Maximum PoE power is 30 W for each PoE port, and 62 W (for TL-SG2008P)/61 W (for TL-SG2210P)/120W (for TL-SG2016P) for all PoE ports.

3. PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.

Installation Guide

Conguration

Connection

For the detailed congurations, refer to the User Guide and CLI Guide. The

guides can be found on the download center of our ocial website:

https://www.tp-link.com/support/download/.

Method 1: Standalone Mode

Switch PC

In Standalone Mode, use a computer to congure and manage the switch.

The switch supports two conguration methods:

Standalone Mode: Congure and manage the switch singly.

Controller Mode: Congure and manage the network devices centrally. It is recommended in the large-scale network, which consists of mass devices such as

access points, switches, and gateways.

Note: When the switch is changed from Standalone Mode to Controller Mode, congurations of the switch will be lost. For details, refer to the related documents on the download center of our

ocial website: https://www.tp-link.com/support/download/.

For simplicity, we will take TL-SG2210P for example throughout the Guide.

Ethernet Ports (1–8)

SFP Slots

IP Camera AP IP Phone

PoE Devices

DC Power Adapter

AC Power Cord

Internet

LED

Power On/O: Power on/o

System Flashing: System running normally

On/O: System running abnormally

Link/Act

Green On: Running at 1000 Mbps, but no activity

Green Flashing: Running at 1000 Mbps and transmitting or receiving data

Yellow On: Running at 100/10 Mbps, but no activity.

Yellow Flashing: Running at 100/10 Mbps and transmitting or receiving data

O: No connected device

SFP1/SFP2

(for TL-SG2210P)

Green/Yellow On: Running at 1000/100 Mbps

Flashing: Transmitting/receiving data

O: No connected device

PoE Status

(For Port 1-4 of TL-SG2008P/

Port 1-8 of TL-SG2210P/

Port 1-8 of TL-SG2016P)

On: Providing PoE power

Flashing: Current-overload/Short-circuit/Connected to a non-standard PD/Power

exceeded the user-dened value

O: Not providing PoE Power

PoE Max

For TL-SG2008P

On: 55 W ≤ Total power supply < 62 W

Flashing: Total power supply keeps ≥ 55 W more than 2 minutes

O: Total power supply < 55 W

For TL-SG2210P

On: 54 W ≤ Total power supply < 61 W

Flashing: Total power supply keeps ≥ 54 W more than 2 minutes

O: Total power supply < 54 W

For TL-SG2016P

On: 113 W ≤ Total power supply < 120 W

Flashing: Total power supply keeps ≥ 113 W more than 2 minutes

O: Total power supply < 113 W

Indication

Method 2: Controller Mode

Switch

Router

Clients

EAP EAP EAP

Controller

Omada Software Controller

running on the Host PC

Choose from the following two types of Omada Controller:

On a PC with Windows OS or Linux OS, download the Omada Software Controller

from https://www.tp-link.com/support/download/omada-software-controller/.

Then run the file and follow the wizard to install and launch the Omada Software

Controller. To manage your devices, Omada Software Controller needs to keep

running on your computer.

Type 2: Omada Software Controller

Switch

Router

Clients

Omada Hardware Controller EAP EAP EAP

(OC200/OC300)

Note:

Before you start, be sure to your devices according to power up and connect

the topology figure.

A DHCP server (typically a router with DHCP function enabled) is required to

assign IP addresses to the EAPs and clients in your local network.

Omada Controller must have network access to your Omada devices (the

router, switch, and EAPs) in order to find, adopt, and manage them.

Omada Hardware Controller (OC200/OC300) is a good alternative if you have no

spare PC to keep running Omada Software Controller in the network. It needs to

be purchased additionally. For more details, refer to the Installation Guide of

OC200/OC300.

Type 1: Omada Hardware Controller (OC200/OC300)

1. Open the Omada Controller’s web page.

Launch the Omada Software Controller on your PC. After the initiation process,

the controller automatically opens its web page. If not, click Launch a Browser

to Manage the Network.

For Omada Software Controller

As Omada Hardware Controller gets its IP address from the DHCP server of

the router, we don’t know its IP address explicitly. However, we can nd it out

on the router’s DHCP client list.

For Omada Hardware Controller

Choose from the following two types of Management Interface:

Type 1: Via Web Browser

1. Download the TP-Link Omada App on your mobile device. It can be downloaded

from App Store or Google Play:

3. After quick setup, login page appears. Enter the username and password you

have created and click Log in. Then you can further configure the controller.

2. On the Omada Controller’s page, follow the wizard to complete the quick setup.

a. You need rst nd the IP address of the router. Open the command line on

your PC and enter . In the result list, find the ipconfig Default Gateway, which

is also the IP address of the router.

c. Enter the IP address of your controller in address bar to open its web page.

b. Launch a web browser and enter the IP address of the router. Log into the

router’s web page, and both the username and password are admin by

default. Then go to Network > LAN > DHCP Client List to find the IP address

of your controller according to its MAC address.

4. (For Remote Management) You can remotely access and manage your

controller via Omada Cloud Service.

Note: Before you start, make sure that both your controller and your PC can

access the internet.

For Omada Software Controller, refer to its User Guide

b. Launch a web browser and enter https://omada.tplinkcloud.com in the

address bar. Enter your TP-Link ID and password to log in. Click + Add

Controller Hardware Controller and choose to add your controller.

a. Make sure is enabled on your controller. By default,Cloud Access Cloud

Access is enabled. Make sure that the Cloud LED is flashing slowly.

For Omada Hardware Controller

Type 2: Via Omada App

2. Launch your Omada App and configure the controller at a local site or remote

site.

a. Connect your mobile device to the EAP by using the default SSID (format:

TP-Link_2.4GHz/5GHz_XXXXXX) printed on the label at the bottom of the

product.

b. Launch Omada App and go to Local Access +, tap the button on the

upper-right corner to add the controller. Then you can further congure

the controller.

Local Management

a. Make sure that is enabled on your controller and your Cloud Access

controller has been bound with your TP-Link ID.

b. Launch Omada App and log in with your TP-Link ID. Then go to Cloud

Access. A list of controllers that have been bound with your TP-Link ID will

appear. Then you can further configure the controller.

Note: Before you start, make sure that both your controller and mobile device

can access the internet.

For Omada Software Controller

a. Make sure that is enabled on your controller. By default, Cloud Access

Cloud Access is enabled. Make sure that the Cloud LED is flashing slowly.

b. Launch Omada App and log in with your TP-Link ID. Then go to Cloud

Access. Tap the + button on the upper-right to add your controller. Then

you can further configure the controller.

For Omada Hardware Controller

Remote Management

Download Omada App

Scan for Omada App

TP-Link hereby declares that the device is in compliance with the essential requirements

and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC,

2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at

https://www.tp-link.com/en/support/ce/

EU Declaration of Conformity

For technical support and other information, please visit

https://www.tp-link.com/support, or simply scan the QR code.

Safety Information

Keep the device away from water, re, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device. If you need service, please

Do not use damaged charger or USB cable to charge the device.

Do not use any other chargers than those recommended.

Adapter shall be installed near the equipment and shall be easily accessible.

Place the device with its bottom surface downward.

The plug on the power supply cord is used as the disconnect device, the socket-outlet

shall be easily accessible.

TP-Link hereby declares that the device is in compliance with the essential requirements

and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and

Electrical Equipment (Safety) Regulations 2016.

The original UK declaration of conformity may be found at

https://www.tp-link.com/support/ukca/

UKCA Declaration of Conformity

Produktspecifikationer

Varumärke:	TP Link
Kategori:	Inte kategoriserad
Modell:	TL-SG2016P
Färg på produkten:	Zwart
Vikt:	246.64 g
Bredd:	127 mm
Djup:	127 mm
Höjd:	50.8 mm
Wi-Fi-standarder:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)