TP Link TL-WPA1000 Bruksanvisning

TP Link Åtkomstpunkt TL-WPA1000

Läs nedan 📖 manual på svenska för TP Link TL-WPA1000 (4 sidor) i kategorin Åtkomstpunkt. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

Ethernet Cable

Extender

TL-WPA7517

Adapter

TL-PA7017

Powerline

* European version is used for demonstration in this guide.

Plug the adapter into a power outlet

and connect it to the router’s LAN

port via an Ethernet cable.

Tip:

Want to unify or personalize your network? See the back

page for instructions.

Plug the extender into a power outlet on the same electrical circuit.

Wait until the extender’s Powerline LED turns on.

Note: If the LED is o, please refer to FAQ > .Q2

Connect your devices to the internet using the default SSID (network

name) and password on the label at the top of the extender.

Attention

2. Plug powerline devices into wall outlets instead of power strips.

Note: Using power strip will aect network performance or even cause connection drops.

1. Use the product only in the upright direction.

Wall Outlet Power Strip

Quick Installation Guide

Plug and Play

Router

WAN LAN

* Images may dier from actual products.

SSID:TP-Link_XXXX

SSID:TP-Link_XXXX_5G

Wireless Password:XXXXXXXX

SSID:TP -LINK_XXX X

SSID:TP -LINK_XXX X_5G

Wireless P worass d:XXXX XXXX

LEDs & Buttons

Personalize Your Networks

Manage your powerline devices using any of the methods below. You

can change the SSID and password, set Wi-Fi schedules, create a guest

network and more.

TP-Link OneMeshTM router and extenders work together to form one unied

Wi-Fi network. Walk through your home and stay connected with the fastest

possible speeds thanks to OneMesh’s seamless coverage.

To check full list of TP-Link OneMesh TM devices, scan the QR

code, or visit https://www.tp-link.com/One-Mesh/compatibility.

Seamless Roaming

Devices automatically switch between your router and extenders as you move

through your home for the fastest possible speeds.

Unied Wi-Fi Network

Router and extenders share the same wireless settings, including network name,

password and more.

Easy Setup and Management

Easily set up and manage a unied Mesh network.

OneMeshTM with Seamless Roaming

Scan to download tpPLC App

tpPLC Utility

For easy management via your computer, download the utility at

https://www.tp-link.com/support/download/.

Note: For detailed instructions, refer to the utility manual on the product’s Support page.

Web Interface

To access all settings, connect to an extender wirelessly and visit

http://tplinkplc.net.

Note: For detailed instructions, refer to the product manual on the product’s Support page.

tpPLC App

For easy management via your smartphone or

tablet, download the app from Apple App Store or

Google Play, or simply scan the QR code.

Unify Your Wi-Fi Networks

Note: You can only pair two devices at a time. We recommend that you plug in the powerline devices near each other when pairing.

Note: If your router doesn’t support the two methods below, refer to Personalize Your Networks section to manually change the extender’s Wi-Fi settings.

Copy SSID and password from your router via any of the methods below to create one unied Wi-Fi network throughout your home.

Create a Secure Powerline Network by Pairing

If you have more extenders, simply plug in and pair each one with the existing adapter to join the network. Then the Wi-Fi settings will automatically sync

from the existing extender to the new ones.

Sync Wi-Fi Settings to More Extenders

Note: If the Power LED does not blink, press the Pair button again.

Press the Pair button on the adapter for 1 second. Its Power LED

should start blinking.

(Within 2 minutes) press the extender’s Pair button for 1 second. Its

Power LED should start blinking.

When the extender’s Powerline LED turns on, a powerline network

has been successfully created.

Method TWO: Via OneMeshTM

SAME

SSID & Password

3Enjoy the internet using your router’s SSID and password. Any changes to the

Wi-Fi settings of your router will be automatically copied to the extender.

Connect your computer to the extender wirelessly. Visit .http://tplinkplc.net

Go to and toggle on . When the OneMesh Join OneMesh extender’s Wi-Fi

LED turn solid on, Wi-Fi settings are copied.

Note: You can use this method when your router supports OneMesh TM.

Method ONE: Via Wi-Fi Button

Note: If Wi-Fi settings are not copied within 2 minutes, manually change the extender’s Wi-Fi settings.

Plug in the extender in the same room as your router. Wait until the

extender’s Wi-Fi LED turns on.

Press your router’s WPS button. (Within 2 minutes) press the extender’s

Wi-Fi button for 1 second. The extender’s Wi-Fi LED starts blinking.

When it stays on, Wi-Fi settings are copied.

3 Relocate the extender and enjoy the internet using your router’s SSID

and password.

Note: You can use this method when your router has a WPS button.

Wireless Router Extender

Blinking

WPS/

WPS

Wi-Fi

Within 2 minutes

Adapter

TL-PA7017

Blinking

Extender

TL-WPA7517

Blinking

Within 2 minutes

DESCRIPTIONITEM

Press for 1 second to set up or join a secure powerline network.

Pair Button

Wi-Fi Button

LED Button

Press for 1 second to start copying Wi-Fi settings from the router.

Press and hold for about 5 seconds to turn Wi-Fi on or o.

Press for 1 second to turn on or o the LEDs.

Press and hold for at least 6 seconds, then release the button to reset the adapter/extender

to default settings.

DESCRIPTION

LED STATUS

Power

Powerline

Ethernet

O

The powerline adapter/extender is on.

Quickly: Pairing is in process.

Slowly: Power-Saving Mode is on.* (TL-PA7017 Only)

The powerline adapter/extender is o.

Blinking

Wi-Fi

The wireless function is enabled.

The powerline extender is syncing wireless network settings.

The wireless function is disabled.

* If the device connected to TL-PA7017 is turned o or inactive for more than 5 minutes, TL-PA7017 will

automatically switch to Power-Saving Mode.

Blinking

O

The Ethernet port is connected or not connected.

The powerline adapter/extender is connected to a powerline network.

The powerline adapter/extender is not connected to any powerline network.

On/O

O

Q1. How do I reset my adapter and extender to factory default settings?

A. Press and hold the Pair button for at least 6 seconds. Release the button and all LEDs turn o. When the

LEDs turn back on, the reset process is complete.

Q2. What should I do if the Powerline LED is o?

A1. Try another wall socket and make sure all powerline devices are on the same electrical circuit.

A2. Try to set up a powerline network by pairing. Refer to the section above for instructions.

A3. If the problem persists, contact our Technical Support.

Q3. What should I do if there is no internet connection in my powerline network?

A1. Make sure all powerline adapters and extenders are on the same electrical circuit.

A2. Make sure the Powerline LEDs are lit on all of your powerline devices. If they are not, pair all devices

again.

A3. Make sure all devices are correctly and securely connected.

A4. Check if you have an internet connection by connecting the computer directly to the modem or router.

Q4. What should I do if a successfully-paired extender does not reconnect after it is

relocated?

A1. Make sure all powerline adapters and extenders are on the same electrical circuit.

A2. Try to pair the extender again, and make sure the Powerline LED is on.

A3. Check for possible interference due to a washing machine, air conditioner or other household appliances

that may be too close to one of the powerline devices. Plug the appliance into the integrated electrical

socket to remove the electrical noise if your powerline device has an integrated electrical socket.

Frequently Asked Questions

Safety Information

Keep the device away from water, re, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

Do not use the device where wireless devices are not allowed.

The socket-outlet shall be installed near the equipment and shall be easily accessible.

Plug the powerline devices directly into the wall outlets but not the power strips.

For technical support, replacement services, user guides, and other information,

please visit https://www.tp-link.com/support, or simply scan the QR code.

If you have any suggestions or needs for our product guides, you are welcome to

email techwriter@tp-link.com.cn.

To communicate with TP-Link users or engineers, please join the TP-Link

Community at https://community.tp-link.com.

Please read and follow the above safety information when operating the device. We cannot

guarantee that no accidents or damage will occur due to improper use of the device. Please use this

product with care and operate at your own risk.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant

provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant

provisions of the Radio Equipment Regulations 2017.

The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/

Produktspecifikationer

Varumärke:	TP Link
Kategori:	Åtkomstpunkt
Modell:	TL-WPA1000
Färg på produkten:	Zwart
Årlig-energiförbrukning:	120 kWu
Energieffektivitetsklass (gammal):	A
Skärm diagonal:	50 "
Upplösning:	3840 x 2160 Pixels
Inkluderar operativsystem:	Android
Ethernet LAN:	Ja
Betraktningsvinkel, horisontell:	178 °
Betraktningsvinkel, vertikal:	178 °
Medföljande kablar:	AC
Integrerad minneskortläsare:	Ja
Kompatibla minneskort:	MicroSD (TransFlash)
Skärmform:	Flat
Typiskt kontrastförhållande:	3200:1
Ljusstyrka:	200 cd/m²
Snabbstartsguide:	Ja
Garantikort:	Ja
Antal USB 2.0-portar:	2
Antal HDMI-portar:	4
Kompositvideoingång:	1
Antal Ethernet LAN (RJ-45)-portar:	1
Smart TV:	Ja
Inbyggda högtalare:	Ja
Genomsnittlig effekt:	16 W
Strömförbrukning (i standby):	0.5 W
Antal batterier/batterier som stöds:	2
Strömförbrukning (max):	120 W
Antal högtalare:	2
Hörlursutgångar:	1
HD typ:	4K Ultra HD
Operativsystem version:	7
HDMI-version:	2.0
Displayteknik:	LED
Respons tid:	- ms
VESA montering:	Ja
Panelmonteringsgränssnitt:	400 x 400 mm
Djup (utan bas):	89.5 mm
Höjd (utan bas):	653.9 mm
Bredd (utan bas):	1128.2 mm
Vikt (utan bas):	10800 g
On Screen Display (OSD)-talen:	DEU, ENG, ESP, FRE, ITA, POR
Skärmdiameter i centimeter:	127 cm
Digitalt ljud, optisk utgång:	1
Digitalt signalformat:	DVB-C, DVB-T, DVB-T2 HD
Internet-TV:	Ja
Enhetsbredd (med stativ):	1128.2 mm
Djupenhet (med stativ):	286.2 mm
Enhetshöjd (med stativ):	706.9 mm
Elektronisk TV-guide:	Ja
On Screen Display (OSD):	Ja
Antal skärmspråk:	6
Antal RF-portar:	1
Automatisk kanalsökning:	Ja
Programmeringsperiod:	7 dag(en)
Grundläggande hotellläge:	Ja
Antal kanaler:	400 kanalen
Fjärrkontroll ingår:	Ja
Wifi:	Ja
AC-ingångsspänning:	100 - 240 V
AC-ingångsfrekvens:	50 - 60 Hz
Strömförbrukning (typiskt):	75 W
Batterier-ingår:	Ja
Batterityp:	AAA