Tripp Lite DMCSTP65CBP Bruksanvisning

Tripp Lite Övervaka DMCSTP65CBP

Läs nedan 📖 manual på svenska för Tripp Lite DMCSTP65CBP (24 sidor) i kategorin Övervaka. Denna guide var användbar för 12 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/24

Owner’s Manual

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR®

surge protector in our monthly drawing!

tripplite.com/warranty

Interactive 65"

Touchscreen Display

1. Important Safety Instructions 2

2. Preparation 4

3. Features 6

4. Initial Setup 10

5. Touch Operation 11

6. Troubleshooting 22

Warranty & Product Registration 23

Regulatory Compliance 23

1. Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the operation of this product.

Failure to heed these warnings may cause product damage, accident, fire, electric shock, serious injury or

death. The warranty may also be affected.

1.1 Installation Warnings

• Install the product indoors, away from excess moisture or heat, conductive contaminants, dust or direct sunlight.

•

Do not install the product near flammable or flame-producing objects, radiators, hot-air vents, stoves or other heat sources.

• Do not use extension cords to connect the product to an AC outlet.

• Connect the AC input power cord directly to a properly grounded 120V AC power outlet. Do not overload the outlet.

• Do not place or mount the product on any unstable or uneven surface, including any surface that isn’t level.

• Do not block any ventilation openings.

• To reduce the risk of fire or electric shock, do not expose the product to rain or moisture.

• Do not place objects on or hang objects from the unit.

• Leave at least 4 inches (10 cm) of open space around the display for proper ventilation to reduce the risk of product

damage or fire.

• Place the product in the installation location before removing it from its shipping container. At least four people are required

to move the product safely without mechanical assistance. Observe proper lifting form to reduce the risk of injury. If a

mechanical assistance device is used to move the product, ensure that the outer carton is not pierced.

• When positioning the product, hold it by the handles behind the display and by the bottom edge (but not the bottom

corners). Keep the product horizontal and upright. Handle it gently and do not drop it.

• To prevent injury and product damage, securely mount the product in accordance with the accompanying mobile floor stand

installation instructions. Use only with the supplied stand or an approved replacement specified by the manufacturer.

• Use caution when moving the product with the accompanying mobile floor stand to avoid injury or hardware damage.

• To mount the product to the wall, use a Tripp Lite VESA-compatible display mount, such as model DWMSC3780MUL. The

wall must be solid, sturdy, stable, smooth and completely vertical. Confirm that the display mount, anchors and wall are

able to bear the full weight of the product before mounting.

• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

• Do not allow any object to impact or fall into the product.

• Do not press against or stress the front panel of the product.

• Avoid dust, chemicals, oils, high humidity and other harsh environmental contaminants and conditions.

• Do not place the product in an application where it will be required to operate continuously without first consulting the

manufacturer.

• Keep all packing materials and small objects out of the reach of children.

• Do not allow children to climb or play on the product, nor any furniture, stands or mounts connected to the product.

• For best performance, keep the indoor temperature between 32º F and 104º F (0º C and 40º C).

• Do not expose the product to direct air conditioning.

1.2 Connection Warnings

• Use only the AC input power cord supplied with the product, or an approved replacement specified by the manufacturer.

• Confirm that the AC input power cord is securely connected to the product’s power inlet.

• Do not modify the plug, and do not use an adapter that would eliminate the ground connection.

• Do not bend the AC input power cord excessively, nor place heavy objects on the power cord. This may damage the cord.

• Do not unplug the AC input power cord from the display while the product is operating.

• Unplug the product during lightning storms or when it will be unused for long periods of time.

• When unplugging the AC input power cord, firmly grasp the plug, not the cord. Pulling on the cord may damage it.

• Do not attempt to use a damaged power cord, plug or outlet. This may cause an electric shock or fire.

1. Important Safety Instructions

• If the power cord is damaged or feels hot, turn off the main power switch, allow the cord to cool and then unplug it.

• Ensure that all cords connected to the product are properly routed and secured to prevent tripping and entanglement

hazards.

1.3 Operation Warnings

• If the screen does not display an image after being turned on, unplug the AC input power cord and contact Tripp Lite for

service.

• If the product is dropped or damaged, unplug the AC input power cord and contact Tripp Lite for service.

• Do not touch the product with wet hands.

• Do not touch, push, rub or tap the screen surface with your fingernail or any object other than a fingertip or the included

touchscreen pen/stylus. Using a fingernail or other sharp object may damage the screen.

• Before cleaning the product, unplug the power cord. Wipe gently with a soft, dry cloth to prevent scratching.

• Do not use any chemicals, such as waxes, benzene, alcohol, glass cleaners, thinners, insecticides, air fresheners or

lubricants on the product, as these may damage the screen’s finish and cause discoloration.

• Do not spray water or other liquids directly on or into the product. If liquid enters the product, it may result in fire, electric

shock, hardware damage or malfunction. Unplug the AC input power cord immediately.

• If a fixed image displays on the screen for a long period of time, it may become imprinted on the screen permanently. This

image burn-in is not covered by the product warranty. Avoid displaying fixed images for excessive periods (2+ hours), turn

off the screen when not in use and use the built-in screen saver to prevent image burn-in.

• When viewing the screen, take 5- to 15-minute breaks every hour. Viewing the screen for long periods without rest may

cause fatigue and eyestrain.

• Do not touch the ventilation openings. They may become hot when the product is in operation.

• If the product emits smoke or a burning smell, unplug the AC input power cord and contact Tripp Lite for service.

1.4 Remote Control Battery Warnings

• Use only the size and type of batteries specified.

• Follow the correct polarity when installing the batteries, as indicated in the battery compartment. Reversed batteries may

damage the remote control.

• Do not mix different battery types (e.g. Alkaline, Carbon-zinc or Rechargeable) or old and new batteries.

• If the remote control will not be used for a long period of time, remove the batteries to prevent damage or injury from

possible battery leakage.

• Do not try to recharge batteries that are not designed to be recharged; they may overheat and rupture.

• Use caution when inserting batteries to avoid battery damage and potential short circuits. Never use damaged batteries, as

they may overheat and cause device damage or injury.

• Do not expose batteries to excessive heat such as direct sunlight or fire.

1.5 Service Warnings

• There are no user-serviceable parts inside the display. To reduce the risk of electric shock, do not attempt to open or

remove any part of the display’s enclosure for any reason, including the back cover. There are dangerous voltages inside

the product.

• If service is required, contact Tripp Lite at 773.869.1234 or tripplite.com/support. Service performed by non-authorized

personnel will void the product warranty.

Produktspecifikationer

Varumärke:	Tripp Lite
Kategori:	Övervaka
Modell:	DMCSTP65CBP
Enhetsplacering:	Onderbouw
Bredd:	600 mm
Djup:	573 mm
Höjd:	815 mm
Nettoskatt:	2300 W
Antal platsinställningar:	12 couverts
Dörrfärg:	Roestvrijstaal
Sladdlängd:	1.7 m
Torkningsklass:	A
Cykelns längd:	198 min
Ljudnivå:	49 dB
Årlig-energiförbrukning:	290 kWu
Energieffektivitetsklass (gammal):	A+
Vattenförbrukning per cykel:	13 l
Antal tvättprogram:	4
Färgkontrollpanel:	Roestvrijstaal
Saltindikator:	Ja
Sköljmedelsindikator:	Ja
AquaStop-funktion:	Ja
AquaSensor funktion:	Ja
Tvättprogram:	Auto 55-65°C, Eco, Pre-rinse, Quick
Energiförbrukning per cykel:	1.02 kWu
Årlig vattenförbrukning:	3653 l
Certifiering:	CE, VDE