Tripp Lite E2SLD Bruksanvisning
Tripp Lite
Detektor
E2SLD
Läs nedan 📖 manual på svenska för Tripp Lite E2SLD (16 sidor) i kategorin Detektor. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/16
1
Owner’s Manual
EnviroSense2
Leak Detection Sensor
Model: E2SLD
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1 Introduction 2
1-1 Parts List 2
1-2 Tools Required 2
1-3 Specifications 2
2 Important Safety Instructions 2
3 E2SLD Installation 3
3-1 Mounting the Leak Detection Sensor 3
3-2 Wiring the Sensor 3
4 Connecting to WEBCARDLX and E2MTHDI 4
5 Warranty and Product Registration 4
Español 5
Français 9
Русский 13
2
1-1 Parts List
A Water Sensor
B Cover
C 22 AWG Cable, 15 ft. (4.6 m)
D Owner’s Manual
E Double-Sided Adhesive Tape
1-2 Tools Required
A Wire Cutters
B Wire Strippers
C Phillips Screwdriver
D Flathead Screwdriver
1-3 Specifications
Electrical
Voltage: 5~24V DC
Standby Current: 1 mA
Alarm Current: 200 mA
Contact Closure Type: Normally Open
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that must be followed during the installation and operation of the products
described in this manual. Read all instructions and warnings thoroughly before attempting installation. Failure to comply may
invalidate the warranty and cause property damage and/or personal injury.
1 – Introduction
2 – Important Safety Instructions
The E2SLD leak detection sensor is designed to detect water leakage or leakage of any electrically conductive fluid. The E2SLD supports a
Normally Open contact closure connection. It must be used with a compatible Tripp Lite UPS or PDU equipped with the WEBCARDLX or
LX Platform interface, along with a compatible E2 environmental sensor module (both are sold separately).
• Install in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive contami-
nants, dust and direct sunlight.
• Provide suitable grounding in accordance with all applicable electrical wiring regulations.
• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life
support equipment or to significantly affect its safety or effectiveness is not recommended.
A
A B C D
B
C
DE
3
3 – E2SLD Installation
The E2SLD leak detection sensor should be mounted on a raised floor near cooling units and other applications where water and other
electrically conductive fluid leakage detection can occur.
Approximately 1” (25 mm)
Approximately 0.38” ( )10 mm
3-1 Mounting the Leak Detection Sensor
The E2SLD supports mounting by screws, double-sided tape, or adhesive.
1 Mark the intended location of the E2SLD with the probes facing
downward approximately 1/8” (3 mm) above the floor.
2 Mount the sensor to a wood, metal, or concrete* surface using the
provided #6 screws or double-sided tape.
*A user-supplied adhesive will be necessary for concrete surface mounting.
3-2 Wiring the Sensor
1 Before attaching the wire to the switch, use wire cutters to clip to
desired length (if necessary).
2 Use wire strippers to cut back the covering of the two wires and
remove a small amount of insulation from the end of each wire
(do not cut through the insulation into the wire itself).
3 Correct polarity is required. Twist the tinned or bare ends of
each wire and place the red wire on the “+” positive marked
terminal and the black wire on the “-” negative marked terminal.
Wrap them clockwise under the head of each screw on the
sensor. Tighten the screw by turning it clockwise.
4 Use cable ties and adhesive cable tie holders (user-provided) to
secure the entire length of the wire.
5 Route the wire away from the sensor and attach the other ends
to one of the input connections on the compatible E2MTHDI
module, noting the polarity markings that were wired at the
sensor.*
*Each E2MTHDI input contacts will have “+” positive polarity markings to
ensure proper wiring connection.
FLOOR
1/8” (3 mm)
Produktspecifikationer
| Varumärke: | Tripp Lite |
| Kategori: | Detektor |
| Modell: | E2SLD |
Behöver du hjälp?
Om du behöver hjälp med Tripp Lite E2SLD ställ en fråga nedan och andra användare kommer att svara dig
Detektor Tripp Lite Manualer
12 Augusti 2024
Detektor Manualer
- Detektor Bosch
- Detektor Garmin
- Detektor Honeywell
- Detektor Abus
- Detektor Alecto
- Detektor AngelEye
- Detektor Amprobe
- Detektor Silverline
- Detektor Brennenstuhl
- Detektor Hikvision
- Detektor Nedis
- Detektor Black And Decker
- Detektor Pyle
- Detektor Milwaukee
- Detektor Elro
- Detektor Sun Joe
- Detektor Extech
- Detektor Denver
- Detektor Ei Electronics
- Detektor Genie
- Detektor Optex
- Detektor Axis
- Detektor Metrix
- Detektor Voltcraft
- Detektor Maginon
- Detektor Dometic
- Detektor Velleman
- Detektor Techly
- Detektor Smartwares
- Detektor Marquant
- Detektor Ferrex
- Detektor Perel
- Detektor Kyoritsu
- Detektor Steinel
- Detektor IFM
- Detektor Flir
- Detektor Royal Sovereign
- Detektor AcuRite
- Detektor Olympia
- Detektor Soler And Palau
- Detektor Uniden
- Detektor Dahua Technology
- Detektor Grothe
- Detektor Testboy
- Detektor Trotec
- Detektor Siedle
- Detektor Netatmo
- Detektor Cobra
- Detektor Hager
- Detektor FireAngel
- Detektor Powerfix
- Detektor Konig
- Detektor BRK
- Detektor Busch-Jaeger
- Detektor Duro
- Detektor Fluke
- Detektor Xavax
- Detektor X4-Tech
- Detektor Jung
- Detektor FireX
- Detektor DSC
- Detektor Steinberg
- Detektor Laserliner
- Detektor Astralpool
- Detektor Iget
- Detektor Nexa
- Detektor Satel
- Detektor Homematic IP
- Detektor Testo
- Detektor Sauter
- Detektor Garrett
- Detektor X-Sense
- Detektor Kreator
- Detektor ORNO
- Detektor Toolcraft
- Detektor Mercury
- Detektor Multimetrix
- Detektor Gamma Scout
- Detektor Ferguson
- Detektor Ebode
- Detektor Beha-Amprobe
- Detektor Vimar
- Detektor Escort
- Detektor ZKTeco
- Detektor System Sensor
- Detektor Schwaiger
- Detektor Inovonics
- Detektor V-Tac
- Detektor Guardian Avionics
- Detektor EVOLVEO
- Detektor Thitronik
- Detektor Whistler
- Detektor Cavius
- Detektor Chauvin Arnoux
- Detektor Pentatech
- Detektor PCE Instruments
- Detektor Flow Smoke Detector
- Detektor Joy-it
- Detektor Techno Line
- Detektor Benewake
- Detektor BeeSecure
- Detektor Fisher
- Detektor SureCall
- Detektor Schabus
- Detektor Zircon
- Detektor Protector
- Detektor Sanwa
- Detektor Resideo
- Detektor STI
- Detektor HT Instruments
- Detektor BlendMount
- Detektor K40
- Detektor Gewiss
- Detektor Seco-Larm
- Detektor Silent Knight
- Detektor Seaward
- Detektor National Geographic
- Detektor GEV
- Detektor S.E. International
- Detektor Rocky Mountain
- Detektor Skyscan
- Detektor Bearware
- Detektor Winland
- Detektor Noyafa
- Detektor Bounty Hunter
- Detektor Craftfull
Nyaste Detektor Manualer
30 Mars 2025
28 Mars 2025
21 Mars 2025
14 Mars 2025
12 Februari 2025
9 Januari 2025
7 Januari 2025
4 Januari 2025
31 December 2025
31 December 2025