Turbo Scrub Cordless Bruksanvisning

Läs nedan 📖 manual på svenska för Turbo Scrub Cordless (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
mAh
OPERATION INSTRUCTIONS:
WARNING:
• Always use rubber gloves and proper eye wear to avoid contact from
splashing of soaps or detergents on skin and/ r eyes while head is spinningo
and when brushes are removed or attached.
When done using Turbo Scrub™, turn unit off while brush is still in contact
with surface to avoid getting splashed with soaps or detergents.
• Always test on a small, inconspicuous area before using on a larger area.
Always follow surface manufacturer’s guidelines for cleaning and maintenance.
PLEASE RETAIN THESE INSTRUCTIONS
ASSEMBLY INSTRUCTIONS:
If using Extension Pole:
1. Be sure ON/OFF button onHandleis in OFF position.
2. Line up connection tab of “Extension Pole” and “Release Button” of “Handle”.
Press together until you hear a “click.
3. Line up connection tab of “Headand “Release Buttonon Extension Pole.
Press together until you hear aclick.”
4. To attach brush attachment of your choice, simply line up tabs of “Brush
Attachmentand “Brush Connector” onHeadand press together until you
hear a “click.”
Without Extension Pole:
1. Be sure ON/OFF button onHandleis in OFF position.
2. Line up connection tab of “Head” andRelease Button” on Handle. Press
together until you hear aclick.”
3. To attach brush attachment of your choice, simply line up tabs of Brush
Attachment andBrush Connector” on “Head” and press together until you
hear a “click.”
Do not use with abrasive cleaners on any surface.
• Avoid exposing the unit to excessive water. If Turbo Scrubaccidentally
becomes submerged in water or water gets into “Charging Port”, shake out
liquid and allow Turbo Scrub™ to dry overnight.
1. Choose proper Brush Attachment and attach to Turbo Scrub™ as directed in
“Assembly Instructions.
• All-Purpose Brush: Best for large jobs, cleaning tile, and grout.
Corner Brush: Best for corners, door tracks, and tight spaces.
Heavy Duty Brush: Best for tough jobs, where you need to focus
a power on certain area.
2. Wet the intended area and apply desired cleaning product.
3. Place tip of brush on surface to be cleaned.
4. Being sure you have a firm hold of the handle, press ON/OFF button to
ON” position.
NOTE: DO NOT apply pressure. Turbo Scrub™ works best when lightly applied to surface.
5. When done, press ON/OFF button to OFF position. Clean Turbo Scrubas
directed.
CARE & MAINTENANCE:
* Use a damp, non-abrasive cloth to clean Turbo Scrub™ unit. If needed, use a
mild detergent. Let air dry.
o Do NOT immerse or run under water.
o Do NOT clean with alcohol or Heavy Cleaning Detergents.
• Rinse Brush attachments under water and clean thoroughly after use. Let air dry.
Heavy-Duty
Brush
On/Off
Button Handle
Connector
Release Button
Extension Pole
Handle
Head
Wall Charger
Brush
Connector
Head/Extension
Connector
Release Button
Charging Port Cover
1. Be sure ON/OFF button on “Handleis in OFF position.
2. OpenCharging Port Cover” located on bottom ofHandle” of unit.
3. Insert cable end ofWall Charger” into “Charging Port.”
4. Plug “Wall Charger” into wall outlet. Red light next toCharging Port” will blink RED to show
unit is charging.
5. Allow Turbo Scrub™ to charge for 2 hours. Red light will remain lit when battery is
completely charged.
6. When done, remove “Wall Adapter” from unit and wall, and close “Charging Port Cover”.
CONTENTS:
Do NOT exceed 12 hours of consecutive charging. Doing so may lead to
shortened overall battery life. It is not necessary to wait until battery
power is fully depleted before recharging.
CHARGING INSTRUCTIONS:

Produktspecifikationer

Varumärke: Turbo Scrub
Kategori: Inte kategoriserad
Modell: Cordless

Behöver du hjälp?

Om du behöver hjälp med Turbo Scrub Cordless ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Turbo Scrub Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer