TurboChef Eco ST Bruksanvisning

TurboChef Ugn Eco ST

Läs nedan 📖 manual på svenska för TurboChef Eco ST (1 sidor) i kategorin Ugn. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
Step 1: Prepare the Oven
WARNING: e oven operates at approximately
500°F (260°C) and may cause injury if not allowed to
cool properly.
Turn o the oven by touching the O icon.
Slightly open the oven door.
Cooling takes approximately 30 minutes. DO NOT
proceed to Step 2 until the oven displays “ready to
clean.
Step 2: Remove the Cook Plate and Lower
Jetplate
WARNING: Be sure the oven interior is cool before
removing these items.
• Remove the cook plate from the oven (Step 2, Fig. A).
• Loosen the bottom jetplate thumbscrew.
• Lift the front of the bottom jetplate and pull it out
from the cavity (Step 2, Fig. B).
Step 3: Clean the Cook Plate and Lower
Jetplate
• Wash, rinse, sanitize, and dry the jetplate and cook plate.
Step 4: Remove the Lower Panel and Clean
the Air Filter
CAUTION: TurboChef does not recognize blocked
air vents as a warrantable claim. e lter must be
cleaned regularly or replaced if damaged. During
oven operation, the lter must remain in place at all
times.
Remove the lower panel (under the door) by lifting
straight up until the bolts are free from the retaining slots.
• Empty and clean the lower panel.
• Remove the air lter from the front of the oven.
• Rinse the air lter with hot water.
• Allow the air lter to dry completely.
CAUTION: DO NOT operate the oven without
the air lter in place.
Step 5: Wipe the Oven Interior
• Use a food vacuum or damp towel to remove large
particles from the oven cavity.
Step 6: Clean the Oven Interior
• Spray TurboChef Oven Cleaner onto the top, bottom,
and sides of the interior.
CAUTION: DO NOT spray Oven Cleaner into the
holes on the back oven wall. Doing so can damage
critical oven components, resulting in a non-warranty
service call.
• Allow Oven Cleaner to penetrate stains for five minutes.
• Clean the oven interior with a nylon scrub pad.
Daily Cleaning for the ECO ST Oven
Follow the steps below when cleaning your ECO ST oven. Use only TurboChef ®
-approved cleaning chemicals. e use of any other cleaning products may
damage critical oven components, resulting in a non-warranty service call.
TurboChef ® Oven Cleaner (Product Number: 103180), TurboChef ® Oven Guard
(Product Number: 103181), Kay ClickSan® sanitizer, nylon scrub pad, clean damp
and dry towels, disposable gloves, protective eyewear, dust mask (optional)
Part Number: DOC-1747 / Rev A / August 2019
Country Code: NA/EU
Customer Service: 800.90TURBO (within U.S.)
Customer Service: +1 214-379-6000 (outside U.S.)
©2018 TurboChef Technologies, Inc. tm
Daily Cleaning Supplies and Equipment
Step 7
Step 8
Step 4 Step 9
Step 6 Step 11
Step 10
Step 2 (Fig A)
Step 5
Step 2 (Fig B)
Step 1
Step 6: Clean the Oven Interior, Continued
: CAUTION DO NOT attempt to scrub the upper
jetplate (A). If food is stuck to the oven ceiling,
gently remove it without applying pressure to the
glass plate. Breakage will result in a non-warranty
service call.
: CAUTION DO NOT remove the top glass
jetplate (A); breakage will result in a non-warranty
service call.
Step 7: Clean and Dry the Oven Door
CAUTION: DO NOT spray Oven Cleaner
directly onto the oven door gasket (B) or saturate
it with water.
CAUTION: DO NOT scrub or attempt to clean
the oven door gasket (B). Doing so may cause the
oven door to misalign, resulting in a non-warranty
service call.
• Clean oven door with Oven Cleaner and a nylon scrub pad.
• Wipe the oven door with a damp towel.
Step 8: Rinse or Wipe the Oven Interior
CAUTION: DO NOT use a hose or water jet
for cleaning. Doing so can damage critical oven
components, resulting in a non-warranty service call.
• Wipe down the oven interior with a clean damp towel.
• Dry the oven interior with a clean towel.
Step 9: Apply TurboChef Oven Guard
• Spray TurboChef Oven Guard onto a clean towel.
• Wipe the interior walls and the inside of the oven door.
CAUTION: DO NOT spray Oven Guard into
the cavity, especially around the holes on the back
oven wall. Doing so can damage critical oven
components, resulting in a non-warranty service call.
Step 10: Reinstall Components
• Reinstall the lower jetplate and tighten the thumbscrew.
• Reinstall the cook plate.
• Close the oven door.
• Reinstall the lter, or replace it with a new one if the
mesh is deteriorated, has large openings, or has started
to dislodge from the frame.
• Reinstall the lower panel.
Step 11: Clean the Oven Exterior
• Wipe the oven exterior with a clean, damp towel.
CAUTION: DO NOT spray chemicals into any
openings, such as the vents below the door or on
the back panel. Doing so can damage critical oven
components, resulting in a non-warranty service call.
• e oven is ready to turn on.
Step 6, Continued
A
B

Produktspecifikationer

Varumärke: TurboChef
Kategori: Ugn
Modell: Eco ST

Behöver du hjälp?

Om du behöver hjälp med TurboChef Eco ST ställ en fråga nedan och andra användare kommer att svara dig




Ugn TurboChef Manualer

Ugn Manualer

Nyaste Ugn Manualer