Uni-T UT209 Bruksanvisning

Läs nedan 📖 manual på svenska för Uni-T UT209 (4 sidor) i kategorin Mätutrustning. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
Model UT209 is 4000-count digital clamp multimeter(hereinafter referred to as "the
Meter") characterized with steady operation, high reliability and novel structure.
The meter is designed with large-scale integrated circuits and dual integral A/D
converter as its core and offer overload protection for all ranges.
for
1 pc
1 pc
1 pc
damaged part,
This Meter complies with IEC 61010 Overvoltage Category (CAT. II 600V, CAT. III
300V), Pollution Degree 2 and Double Insulation standards.
is working
When servicing the Meter, use only the replacement parts with the same
model or identical electrical specifications.
Low Battery Indication
(See Figure 1)
Lever:
on which rotary switch position the functions of buttons are available.
(See Figure 2)
A.Measuring DC/AC Voltage (See Figure 3)
(See Figure 4)
during measurement.
(See Figure 5)
;
;
during measurement.
(See Figure 6)
E.Measuring Frequency (See Figure 7)
F.Measuring DC Current (See Figure 8)
into
4. Press the lever to open the transformer jaw, hold it tight and don't release.
The built-in components are very sensitive not only to the magnet but also to
heat and mechanical force. Any shock will cause change to the reading in the
short time.
5. the lever
cause ± 1%
measure
To obtain a more accurate DC current reading, follow the procedure as below:
1. Turn off the current to the tested conductor.
2. Press the lever to open the transformer jaw, and center the conductor within
the transformer jaw.
4. Turn on the current to the tested conductor, read out the reading after the
Meter is stable.
3. .
5.
Figure 9
DC current
G.Measuring AC Current (See Figure 9)
2. Press the Lever to open the transformer jaw, hold it tight
and don't release. The built-in components are very
sensitive not only to the magnet but also to heat and
mechanical force. Any shock will cause change to the
reading in the short time.
cause
measure
3.
AC Conversion:
UT209: AC-coupled and True RMS responded. Input the sinewave.
Non-sine
AC current
section.
Pressing
Technical Specifications
Low Battery Indication:
Opening:
Safety/ Compliances: IEC 61010 CAT. II 600V, CAT. III 300V,
Double Insulation and Pollution Degree 2.
Accuracy Specifications
Non-sine
AC Conversion:
UT209: AC-coupled and True RMS responded. Input the sinewave.
Maintenance
(See Figure 10)
P/N: 110401104374X
MAY.2018 REV. 4

Produktspecifikationer

Varumärke: Uni-T
Kategori: Mätutrustning
Modell: UT209

Behöver du hjälp?

Om du behöver hjälp med Uni-T UT209 ställ en fråga nedan och andra användare kommer att svara dig




Mätutrustning Uni-T Manualer

Uni-T

Uni-T UT612 Bruksanvisning

30 December 2025
Uni-T

Uni-T UT18D Bruksanvisning

17 December 2024
Uni-T

Uni-T UT363s Bruksanvisning

17 December 2024
Uni-T

Uni-T UT383s Bruksanvisning

17 December 2024
Uni-T

Uni-T UT575B Bruksanvisning

21 September 2024
Uni-T

Uni-T UT503PV Bruksanvisning

21 September 2024
Uni-T

Uni-T UT225B Bruksanvisning

20 September 2024
Uni-T

Uni-T UT377C Bruksanvisning

20 September 2024
Uni-T

Uni-T UT387S Bruksanvisning

20 September 2024

Mätutrustning Manualer

Nyaste Mätutrustning Manualer