V-Tac VT-11108 Bruksanvisning

V-Tac Lampa VT-11108

Läs nedan 📖 manual på svenska för V-Tac VT-11108 (2 sidor) i kategorin Lampa. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/2
SOLAR LED FLOODLIGHT
INTRODUCTION & WARRANTY
INSTALLATION DIAGRAM
TWO OPTIONAL WORKING MODES
FEATURES
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any
another query, please contact our dealer or local vendor from whom you have purchased the product. They are
trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The
warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company
gives no warranty against damage to any surface due to incorrect removal and installation of the product. This
product is warranted for manufacturing defects only.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
NOTICE & WARNING
1. This is a solar powered lamp, please install it in a location where can
get enough sunshine.
2. Please note the lighting time depends on sunshine duration & weather.
3. The lamp will light up automatically at dusk.
4. Recommended installation height is 3~4Mtr.
5. The lamp is equipped with an internal battery pack, which is replace-
able.
If any need, please contact seller for correct new battery pack.
6. Please connect the lamp to solar panel to get solar charging.
7. Built-in intelligent IC is with over-charge, over-discharge protection,
safe and durable.
8. Non-professionals please do not disassemble the lamp.
9. Please do not dispose the battery with household garbage to avoid
explosion.
Caution, risk of electric shock.
This marking indicates that this
product should not be disposed
of with other household wastes.
TECHNICAL DATA:
MODE A:
MODE B:
MODEL VT-11108
LUMENS 950LM
WATTS 8W
NO. OF LEDs 64 PCS
BATTERY TYPE 
BEAM ANGLE 120°
SENSING RANGE 
CHARGING TIME 
WORKING TIME 
MATERIAL ABS+PC
Solar Powered Auto On/Off Two Work Modes Cordless to Install
Ultra-thin Foldable Adjustable 8 in 1 Multi Functions
1PC * Lamp 2PCS * Screws with
Flat & Spring Washers
(for Wall Mount）
2PCS * Screws
(for Hanging)
2PCS * Stickers 1PC * User Manual
User Manual
Patent Design
8-in-1
20
PAP
On/Off/Select working mode
Please rotate the lamp head and press the button to select working mode.
1. Press the button 1st time, lamp turns on to Mode A.
2. Press the button 2nd time, lamp shines once and turns to Mode B.
3. Press the button 3rd time, lamp turns off.
When battery power is more than 30% :
When battery power is less than 30% :
Lamp automatically lights up at night and
turns to 100% brightness when motion
is detected in the range ≤8mtrs, then dim
to lower brightness after 20 seconds
of no motion.
Lamp automatically lights up at night and
turns to 100% brightness when motion
is detected in the range ≤8mtrs, then turns
off after 20 seconds of no motion.
120° 120°
120° 120°
Lamp automatically lights up at night and keep 100% brightness, after 5 hours or when battery power is less
than 30%, lamp turns to Energy Saving Mode: Lamp automatically turns to 100% brightness when motion is
detected in the range ≤8mtrs, then turns off after 20 seconds of no motion.
After 5 hours or when the battery
power is less than 30%
120°
KIND REMIND:
When the lamp is not connected to the solar panel, the light sensor is disabled. Whether it is day
or night, the lamp will stay on after it is turned on.
INSTALLATIONS:
180°
180°
360°
①
②
Rotate the lamp head to adjust lighting directions, 180° adjustable.
Rotate the screw to adjust solar panel vertically, 180° adjustable.
Hold the lamp base and rotate the lamp post to adjust whole lamp angle, 360° adjustable.
①
②
③
③
INSTALLATION B: SPLIT WALL MOUNT
INSTALLATION C: LAMP WALL MOUNT WITH MAGNET
INSTALLATION D: LAMP WALL MOUNT WITH STICKER
MORE OPTIONAL INSTALLATION
INSTALLATION E: LAMP WALL MOUNT WITH SCREWS
INSTALLATION E: PILLAR MOUNT
PORTABLE LAMP
WIDE APPLICATIONS:
1. Integrated wall mount for garden, entrance, garage, courtyard, fence, campus etc.
2. Split wall mount for roof, corner, pathway, bus station, attic, pavilion etc.
3. Hanging for balcony light, emergency light etc.
4. Portable as flash light, camping light, emergency use etc.
5. Standable as work light, pillar light, ground light, wall washer light etc.
6. It can be magnetized on any flat metal surface for flexible use.
7. Lamp can be sticked directly for flexible use.
INSTALLATION A: INTEGRATED WALL MOUNT
The recommended mounting height is 2-4Mtrs.
① Drill 2 holes (φ6mm, depth 50mm) with a spacing of 58mm.
② Fix the expansion plugs in the holes.
③ Use screws with flat & spring washers to fix the lamp on the wall. Adjust solar panel angle and lighting
direction as needed.
Depth:
50mm
φ6mm
58mm
① ② ③
Drill 2 holes (φ6mm, depth 50mm) with a spacing of height 58mm.
Fix the expansion plugs in the holes.
Use screws with flat & spring washers to fix the lamp on the wall.
Drill 2 holes (φ6mm, depth 50mm) with a spacing of width 120.3mm.
Fix the expansion plugs in the holes, then fix the screws into the expansion plugs, keeping the screws
protruding 3-5mm.
Hang the lamp on the screws.
Connect the cable of the solar panel to the lamp.






• To charge the lamp, connect the cable of the solar panel to the lamp
• Sensor will not work if the lamp is not connected in solar panel



• To charge the lamp, connect the cable of the solar panel to the
lamp
• Sensor will not work if the lamp is not connected in solar panel




• To charge the lamp, connect the cable of the solar
panel to the lamp
• Only PIR Sensor will work if the lamp is not connected
to the solar panel
Drill 2 holes (φ8mm, depth 50mm) with a spacing of 120.3mm.
Fix the expansion plugs in the holes.
Use screws with flat & spring washers to fix the lamp on the ground. Adjust solar panel angle and lighting
direction as needed.





• To charge the lamp, connect the cable of the solar panel to the lamp
• Sensor will not work if the lamp is not connected in solar panel
The connection cable is 3m long, please confirm the installation
position of the solar panel and the lamp before installation.
The lamp head can be removed according to the arrows on the
side of the lamp for split installation.
①②③
④⑤⑥
⑦
Depth:
50mm
φ6mm
58mm
120.3mm
3-5mm
①②
Metal flat surface
①②③④⑤
① ② ③ ④
Depth:
50mm
Depth:
50mm
①②③


MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.

Produktspecifikationer

Varumärke: V-Tac
Kategori: Lampa
Modell: VT-11108

Behöver du hjälp?

Om du behöver hjälp med V-Tac VT-11108 ställ en fråga nedan och andra användare kommer att svara dig


Lampa V-Tac Manualer

V-Tac

V-Tac VT-92200 Bruksanvisning

25 September 2024
V-Tac

V-Tac VT-92150 Bruksanvisning

25 September 2024
V-Tac

V-Tac VT-8315 Bruksanvisning

25 September 2024
V-Tac

V-Tac VT-9-202-N Bruksanvisning

25 September 2024
V-Tac

V-Tac VT-9-156S Bruksanvisning

25 September 2024
V-Tac

V-Tac VT-9-206S Bruksanvisning

25 September 2024
V-Tac

V-Tac VT-9-111 Bruksanvisning

25 September 2024
V-Tac

V-Tac VT-9-112 Bruksanvisning

25 September 2024
V-Tac

V-Tac VT-90201 Bruksanvisning

25 September 2024
V-Tac

V-Tac VT-92100 Bruksanvisning

25 September 2024

Lampa Manualer

Nyaste Lampa Manualer

Hensel

Hensel Expert D 500 Bruksanvisning

26 Oktober 2024
IKEA

IKEA NYFORS 103.031.10 Bruksanvisning

26 Oktober 2024
IKEA

IKEA VÅGHÖJD 705.204.36 Bruksanvisning

26 Oktober 2024
Philips

Philips LPL72X1 Bruksanvisning

24 Oktober 2024
IKEA

IKEA SKINA Bruksanvisning

24 Oktober 2024
Philips

Philips PEN20 Bruksanvisning

24 Oktober 2024
ET2

ET2 Picolo E22271-75PC Bruksanvisning

23 Oktober 2024
Crystorama

Crystorama Hampton 5623-AB Bruksanvisning

23 Oktober 2024
Crystorama

Crystorama Sterling 7584-DT Bruksanvisning

23 Oktober 2024
Crystorama

Crystorama Westwood 2256-PN Bruksanvisning

23 Oktober 2024