Valcom VIP-431 Bruksanvisning

Valcom Telefon VIP-431

Läs nedan 📖 manual på svenska för Valcom VIP-431 (3 sidor) i kategorin Telefon. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/3

Issue 1

1 947793

Issue 1

VIP-431-DS

IP TALKBACK WALL SPEAKER/CLOCK ASSEMBLY

INTRODUCTION

The VIP-431-DS IP Talkback Wall Speaker with

Digital Clock enables two-way handsfree voice

access to a single location over an IP-based

network. This allows a page zone extension

anywhere on the network. The speaker audio level

is electronically adjusted via software. Clock

synchronization is acquired from a Network Time

Protocol (NTP) server, either a private internal

server or from the Internet. A call switch input is

provided for call initiation. The enclosure is made

of steel with a durable gray powder coated finish

and features an angled design to direct sound

downward. The color of the enclosure can easily

be changed to match any decor. A detachable

black cloth grille is included. Power is provided to

the VIP-431-DS via a Power over Ethernet (PoE)

switch meeting the 802.3af specification.

SPECIFICATIONS

Access Methods

• PBX, FXO Port using a VIP-811

• POTS telephone set using a VIP-811

• PBX, FXS Port using a VIP-821

• Valcom M Cast Page Group

• SIP–enabled telephone system

Features

• RJ-45 network connection

• 802.3af compatible

• High Efficiency Class-D Amplifier

• Network Time Protocol (NTP) synchronization

INSTALLATION

FCC Information

This equipment has been tested and found to

comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference when the equipment is

operated in a commercial environment. This

equipment generates, uses and can radiate radio

frequency energy and if not installed and used in

accordance with the instruction manual, may cause

harmful interference to radio communications.

Operation of this equipment in a residential area

may cause harmful interference in which case the

user will be required to correct the interference at

his own expense.

DIMENSIONS/WEIGHT

• 15.0” H x 12.25” W

4.0” D (top) 1.45” D (bottom)

(38.1cm H x 31.1cm W

10.2cm D (top) 3.7cm (bottom)

• Weight: 4.25 LBS (1.91 kg)

Environment

Temperature: 0 to +40° C

Humidity: 0 to 85% non-precipitating

Precautionary Designations

CAUTION: To reduce the risk of electric shock,

Do not remove cover.

No user serviceable parts inside.

Refer servicing to qualified service personne l.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indic ates that dangerous

voltage constituting a risk of electric

shock is present with in this unit.

This symbo l indicate s that there are

importa nt operating and maintenance

instructions in the literature acc ompanying

this unit.

2 947793

LED (+)

LED (-)

CONNECTS TO SPEAKER

IP TALKBACK

SPEAKER CONNECTION DETAILS

NETWORK

OUT ON POWER FAIL

-10 dB LINE

CALL SWITCH

SPEAKER OUT

LEVEL OUT

P5P3P2P4

NETWORK

CONNECTION

MOUNTING

BRACKET

Packing List

Qty. Item

1 VIP-431-DS

1 Setup CD

1 VSP Document

1 RJ-45 Patch Cable

MOUNTING

Remove the screw holding the mounting bracket to

the enclosure. Mount the bracket using appropriate

hardware such as #8 pan head crews. After

making the required connections, reattach the

enclosure to the mounting bracket

Figure 1. Connections

Network Connection

The VIP-431-DS has one CAT-5 RJ-45 network

connector on the rear panel. Use the supplied

CAT-5 patch cable to connect the VIP-431-DS to

an Ethernet switch. (See Figure 1)

Call Switch Connection

The VIP-431-DS provides a call switch input via

screw terminal connections. See Figure 1 for

detailed connections.

LED (+) and (-) Connection

LED (+) and (-) is a current limited output designed

to illuminate an optional LED. The LED is intended

to provide visual indication of call progress. The

LED illumination will flash when the call switch is

pressed and will continue to flash until the call is

answered. The LED illumination will be solid while a

connection to the VIP-431-DS is established.

-10 dB Line Level Out Connection

The -10dBm Line Level Out may be connected to

up to 40 Valcom Self Amplified Speakers in order to

provide additional sound reinforcement in an area.

Setup

Information specific to your application will need to

be programmed into the VIP-431-DS using a

computer. The PC used for programming should be

connected to the same subnet as the VIP-431-DS.

Setup will be done using the IP Solutions Setup

Tool. The IP Solutions Setup Tool is included on the

CD-ROM enclosed with the VIP-431-DS.

TECHNICAL ASSISTANCE

When trouble is reported, verify power is being

supplied to the unit and there are no broken

connections. If a spare unit is available, substitute

a spare unit for the suspected defective unit.

Assistance in troubleshooting is available from the

factory. Call (540) 563-2000 and press 1 for

Technical Support or via email at

support@valcom.com

When requesting assistance, you should include all

available information. It is strongly suggested that

you go to the web site and review the information

provided at http://www.valcom.com.

Valcom equipment is not field repairable. Valcom,

Inc. maintains service facilities in Roanoke, VA.

Should repairs be necessary, attach a tag to the

unit clearly stating your company name, address,

phone number, contact person and the nature of

the problem. Send the unit to:

Valcom, Inc.

Repair & Return Dept.

5614 Hollins Road

Roanoke, Va. 24019-5056

3 947793

VALCOM LIMITED WARRANTY

Valcom, Inc. warrants its products only to the original purchaser, for its own use, to be free from defects in materials and workmanship under conditions of

normal use and service for a period of one year from the date of shipment. This Limited Warranty obligation shall be limited to the replacement, repair or

refund of any such defective device within the warranty period, provided that:

1. inspection by Valcom, Inc. indicates the validity of the claim;

2. the defect is not the result of damage, misuse or negligence after the original shipment;

3. the product has not been altered in any way or repaired by others and that factory sealed units are unopened (a service charge plus parts

and labor will be applied to units defaced or physically damaged);

4. freight charges for the return of products to Valcom are prepaid;

5. all units 'out of warranty' are subject to a service charge. The service charge will cover minor repairs (major repairs will be subject to

additional charges for parts and labor).

This Limited Warranty is in lieu of and excludes all other warranties, expressed or implied and in no event shall Valcom, Inc. be liable for any

anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the purchase, operation,

maintenance, installation, removal or use of the product. The maximum liability of Valcom under this warranty is limited to the purchase price of the

specific Product covered by the warranty.

Disclaimer. Except for the Limited Warranty provided herein, the product is provided “as-is” without any warranty of any kind whatsoever including, without

limitation, any WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.

This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the carrier should be notified

immediately. Claims for such damage should be filed with the carrier involved in accordance with the F.O.B. point.

Headquarters:

Valcom, Inc.

5614 Hollins Road Roanoke, VA 24019-5056

Phone: (540) 563-2000 FAX: (540) 362-9800