Vanson BC-1HU Bruksanvisning

Vanson Inte kategoriserad BC-1HU

Läs nedan 📖 manual på svenska för Vanson BC-1HU (12 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/12
E N G L I S H S V E N S K A N O R S K S U O M I
32-6319
Battery Charger
Batteriladdare
Batterilader
Akkulaturi
Model: BC 1HU
Ver. 200802
www.clasohlson.com
3
E N G L I S H
3
Battery Charger
Art. no: 32-6319, Model: BC 1HU
Computer controlled for the charging of Ni-Cd and Ni-MH batteries.
Please read the entire instruction manual before using and save it for future use.
We apologise for any text or photo errors and any changes of technical data.
If you have any questions concerning technical problems please contact our
Customer Service Department (see address on reverse.)
Use
1. Connect the AC/DC adaptor to the charger via the jack.
2. Insert 1 - 4 x batteries of type AA (R6) / AAA (R03) / C (R14) / D (R20)
and/ or 1 - 2 x 9V Ni-Cd and Ni-MH batteries of type 6F22 into the battery
compartment.
NOTE. THERE IS NO PROBLEM MIXING NI-CD AND Ni-MH BATTERIES.
3. Charging without previous discharging (for AAA, AA, C and D batteries).
The charger has a micro computer that controls the charging. Plug the AC/DC
adaptor into a regular 230 V socket. The red LED lights up and the quick-
charge starts. When the battery is charged the red LED turns off and the green
LED lights up to indicate that it is in the maintain charge mode, and that the
batteries are now ready for use. The charged batteries are ready to use.
4. Charging with previous discharging (for AAA, AA, C and D batteries).
Plug the AC/DC adaptor into a regular 230 V socket and push the red button
“DISCHARGE” within 30 seconds. The red LED then starts ashing to indicate
that the discharging has started. When the batteries are discharged the red
LED is lit constantly to indicate that quick-charge is in session. When the
battery is charged the red LED turns off and the green LED lights up to indicate
that it is in the maintain charge mode, and that the batteries are now ready for
use. The charged batteries are ready to use.
5. When the 9V batteries are inserted into the charger a red LED lights up
(between the 9V compartments). When the correct charging time is completed
(11.5 hours according to timer) the red LED shuts off to indicate that the
charging has ended.
6. Pull out the AC/DC adaptor plug out of the socket and remove the batteries
when the charger is not in use.

Produktspecifikationer

Varumärke: Vanson
Kategori: Inte kategoriserad
Modell: BC-1HU

Behöver du hjälp?

Om du behöver hjälp med Vanson BC-1HU ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Vanson Manualer

Vanson

Vanson V-3213 Bruksanvisning

12 September 2024
Vanson

Vanson SMP-60WME Bruksanvisning

12 September 2024
Vanson

Vanson V-6833 Bruksanvisning

12 September 2024
Vanson

Vanson BC-1HU Bruksanvisning

12 September 2024
Vanson

Vanson SMP-20WM Bruksanvisning

12 September 2024
Vanson

Vanson SPM 120 Bruksanvisning

12 September 2024
Vanson

Vanson SMP-90WAT Bruksanvisning

12 September 2024
Vanson

Vanson V-828 Bruksanvisning

12 September 2024
Vanson

Vanson 36-4061 Bruksanvisning

12 September 2024
Vanson

Vanson SDR-120W Bruksanvisning

12 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024