Velleman VTHD04 Bruksanvisning

Velleman Borrmaskin VTHD04

Läs nedan 📖 manual på svenska för Velleman VTHD04 (18 sidor) i kategorin Borrmaskin. Denna guide var användbar för 17 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/18

VTHD04

HIGH-SPEED ELECTRIC DRILL & ENGRAVING SET

ELEKTRISCHE BOORMACHINE & GRAVEERSET

PERCEUSE ÉLECTRIQUE & JEU DE GRAVURE

TALADRO ELÉCTRICO DE ALTA VELOCIDAD & JUEGO DE GRABADO

ELEKTRISCHES BOHR- UND GRAVIERSET

PROFESJONALNA WIERTARKA ELEKTRYCZNA & ZESTAW DO

GRAWEROWANIA

BERBEQUIM ELÉCTRICO DE ALTA VELOCIDADE & KIT DE

GRAVAÇÃO

USER MANUAL 2

GEBRUIKERSHANDLEIDING 4

MODE D’EMPLOI 6

MANUAL DEL USUARIO 8

BEDIENUNGSANLEITUNG 10

INSTRUKCJA OBSŁUGI 12

MANUAL DO UTILIZADOR 14

VTHD04

V. 02 10/05/2016 2 ©Velleman nv –

USER MANUAL

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle

could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal

waste; it should be taken to a specialized company for recycling. This device should be returned

to your distributor or to a local recycling service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into

service. If the device was damaged in transit, do not install or use it and contact your dealer.

2. Safety Instructions

 Keep the cord away from the moving parts of the machine.

 Switch the machine off immediately if it jams and remove the plug from the mains.

 Compare the max. number of revolutions for the accessories with the number of revolutions of the

device.

 When you store the device, the engine must be switched off and all moving parts must have reached

a standstill.

 Do not use collets with a piece of string or such attached to it.

 Never engage the collet lock button while the device is in use.

 Make sure the shaft diameter of the accessory matches that of the collet nut.

 Secure the work piece with a clamping device. Always be careful when handling the device.

 Keep your hands away from the work piece when using the drill.

 Do not use the device in a damp or wet environment or near inflammable liquids or gases.

 Always wear safety goggles and ear protection. Avoid wearing loose clothing or jewellery.

 Inspect the power cord and the device before every use.

 Keep the device away from children and unauthorized persons.

3. General Guidelines

Refer to the on the last pages of this manual. Velleman® Service and Quality Warranty

4. Contents

● ● ● ● 1x electric drill 10x grinder stone 2x diamond bit ● 3x connective post 8x cutting disc

● ● ● ● 4x polishing wheel 4x sanding band ● 2x drill bit 2x collet 1x wet stone ● 3x sanding paper

● 1x spanner

5. Mounting Accessories

Always remove the plug from the mains prior to assembly. Hold the collet lock button while unscrewing

the collet nut and screw the accessory in place. Hold the collet lock button while you are fastening the

collet nut. Do not operate the collet lock button while the device is still connected with the mains.

6. Operation

Switch on the device by engaging the -off switch. Set the desired speed with the speed dial. The on

engine can burn out if too high a load is used at low speed. Only put the device down when the engine

has stopped completely. Do not store the device in a dusty environment as dust particles may penetrate

the mechanics. Always wear safety goggles when using this device.

This device should be used at high speeds for: carving and drilling, working with glass, metals and

hardwood.

This device should be used at low speeds for: polishing, delicate work, most plastic materials.

VTHD04

V. 02 10/05/2016 3 ©Velleman nv –

7. Cleaning and Maintenance

The device does not require any particular maintenance. Clean the casing regularly with a soft cloth when

you are through. Do not use oils or solvents such as alcohol, ammonia, etc. These substances damage

the plastic parts. Remove all dirt and dust from the ventilation slots. Do not get liquid inside the tool.

8. Technical Specifications

speed ........................................................ 10000-32000 rpm with speed adjustment

power supply .................................................................................... 230 V~, 50 Hz

consumption W ................................................................................................135

Use this device with original accessories only. Velleman nv cannot be held responsible in the

event of damage or injury resulting from (incorrect) use of this device. For more info

concerning this product and the latest version of this manual, please visit our website

www.velleman.eu. The information in this manual is subject to change without prior notice.

The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part

of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise

without the prior written consent of the copyright holder.

Produktspecifikationer

Varumärke:	Velleman
Kategori:	Borrmaskin
Modell:	VTHD04
Vikt:	620 g
Höjd:	35 mm
Hållbarhetscertifikat:	RoHS
Uteffekt:	240 W
Spännande:	36 V
AC-ingångsspänning:	90 - 305 V