Ventus W155 Bruksanvisning

Läs nedan 📖 manual på svenska för Ventus W155 (100 sidor) i kategorin Väderstation. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/100
0
VENTUS W155
ENGLISH……………………………………………………………………………..PAGE 01
GERMAN……………………………………………………………………………..PAGE 17
DANISH………………………………………………………………………………PAGE 35
NORWEGIAN………………………………………………………………………..PAGE 55
SWEDISH………………………………………………………………………….PAGE 70
FINNISH………………………………………………………………………………PAGE 85
1
W155. Ventus Wireless Weather station
Owners Manual
Thank you for purchasing the new generation of professional weather station. Designed and engineered
with the state-of-art technology and components, this instrument will provide accurate and reliable
measurement of wind speed & direction, wind chill, daily/weekly/monthly/accumulated rainfall,
barometric pressure, weather forecast, indoor/outdoor humidity, temperature, heat index & dew point as
well as radio-controlled alarm clock. Read this manual carefully to fully explore the features and
functions of the new product.
In this package you will nd:
One monitor (Receiver)
One anemometer (Transmitter – transmit wind & outdoor Channel-1 temperature/humidity data)
One rain gauge (Transmitter – transmit rainfall data)
Mounting hardware for rain gauge (2 sets of screws & plastic screw plugs)
Mounting hardware for anemometer (2 pieces of U-shape metal plate, 4 sets of Hex screws & nuts)
One owner’s manual
Additional tools needed for installation
- Small Phillips screwdriver
- Hexagonal Key
- Electric drill
- Pencil
- Level
- Mast, 1 – 1.25 inch (2.54 – 3.18 cm) in diameter (to mount the anemometer)
Installation
The weather station operates at 433MHz and does not require wire installation among the component
parts. To ensure successful installation and the best performance, we recommend you follow the
installation instructions in the order they appear in this manual.
1. Battery & adapter installation for the monitor (receiver)
Main Power source: Plug in the adapter jack into the side of the unit for basic operation and continuous
backlight.
Backup Power: Open the battery door and insert 6 pieces of AA batteries according to the polarity
indicated, close the battery cover.
2
Sea level pressure setting
After battery/adapter installation, the monitor will enter sea level pressure setting mode directly and the
pressure reading will ash. Press or “ to set the sea level pressure value. Press “PRESSURE” to ▲ ▼
conrm the setting and exit. This allows the unit to provide a more accurate weather forecast &
pressure reading.
You can also set the sea level pressure any time after the installation is completed. For more
information, see “WEATHER FORECAST & BAROMETRIC PRESSURE” section.
Note: you may obtain the current sea level pressure from the weather web site for your locate area.
2. Selecting a location for the anemometer
Select a mounting location for the anemometer that is:
- Outdoors, not blocked on top or sides, so wind can freely reach the anemometer
- Within 30 meter open area from the monitor. Reduce distance if obstacles is between the
anemometer & the monitor
The best location for the anemometer is usually mounted on a mast in an open area where wind is not
blocked on top or sides, or above roof level on the building where the monitor is located.
Testing the eective transmission range
Before mounting the anemometer, measure the distance between the monitor & anemometer and be
sure it is within the eective transmission range. It is recommended to perform a simple RF
transmission test before mounting.
1) Place the monitor in your selected indoor location and install adapter & batteries (see “Battery &
adapter installation for the monitor” section above)
2) Place the anemometer horizontally in your selected outdoor location. Loosen the screws on the
battery door with a small Phillips screwdriver and open the battery door. Insert 2 pieces of AA
batteries according to the polarity indicated. Close the battery door and tighten the screws.
3) Hold “CHANNEL/SEARCH” button on the monitor for 3 seconds and the wind direction,
temperature & humidity icons will ash on the display. The monitor is now searching for all remote
sensors for 2 minutes.
4) If valid wind direction, wind speed and channel-1 temperature/humidity readings are shown on the
monitor within 2 minutes, the RF transmission is successful and the anemometer & monitor are
within the eective transmission.
If above readings are not shown after 2 minutes of searching, the transmission is failed.
Shorten the distance between the anemometer & monitor. Reset the anemometer by removing all
batteries from the anemometer & wait for 10 seconds before re-installing the batteries again.
Repeat step 3 & 4 until the transmission is successful.
5) Remove all batteries from the anemometer before mounting and calibration.

Produktspecifikationer

Varumärke: Ventus
Kategori: Väderstation
Modell: W155

Behöver du hjälp?

Om du behöver hjälp med Ventus W155 ställ en fråga nedan och andra användare kommer att svara dig




Väderstation Ventus Manualer

Ventus

Ventus K0382 Bruksanvisning

18 Oktober 2024
Ventus

Ventus W210 Bruksanvisning

20 September 2024
Ventus

Ventus W640 Bruksanvisning

20 September 2024
Ventus

Ventus W154 Bruksanvisning

20 September 2024
Ventus

Ventus W225 Bruksanvisning

20 September 2024
Ventus

Ventus W233 Bruksanvisning

3 September 2024
Ventus

Ventus W137 Bruksanvisning

29 Augusti 2024
Ventus

Ventus W927 Bruksanvisning

29 Augusti 2024

Väderstation Manualer

Nyaste Väderstation Manualer