Vestfrost WMA 1400 Bruksanvisning

Vestfrost tvättmaskin WMA 1400

Läs nedan 📖 manual på svenska för Vestfrost WMA 1400 (51 sidor) i kategorin tvättmaskin. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/51
WASHING MACHINE
USER’S MANUAL
BEFORE USING THE WASHING MACHINE, YOU SHOULD
CERTAINLY READ THE INFORMATION IN USER’S MANUAL.
CHAPTER-1: TECHNICAL SPECIFICATIONS 3
CHAPTER-2: BEFORE USING WASHING MACHINE 5
Safety warnings 5
Recommendations 6
CHAPTER-3: SETTING UP ..... 7
Removing transport safety screws 7
Adjusting adjustable stays 9
Electrical connection 10
Water inlet connection 10
Water discharge connection 11
CHAPTER-4: PRELIMINARY PREPARATION FOR
LAUNDERING 12
CHAPTER-5: CONTROL PANEL 16
Detergent drawer 17
Programme knob 18
Electronic display 19
CHAPTER-6: OPERATING YOUR MACHINE 20
Selecting programme 20
Auxiliary functions 20
Starting the programme 29
Adding/Removing laundry 30
Child lock 31
Cancelling programme 32
Finishing programme 33
CHAPTER-7: ELECTRONIC DISPLAY WARNING SYMBOLS 34
Warning of water cut-off/low mains water pressure 34
Warning of clogged pump fitler 35
CHAPTER-8: MAINTENANCE AND CLEANING OF YOUR
MACHINE 36
CHAPTER-9: PRACTICAL INFORMATION 41
CHAPTER-10: TROUBLESHOOTING 43
CHAPTER-11: AUTOMATIC FAULT WARNINGS AND
WHAT TO BE DONE 48
CHAPTER-12: DESCRIBING AND SAVING ENERGY 50
2
CONTENTS
2 3 4
1
5
6
8 9
10
7 7
7 7
3
CHAPTER -1: TECHNICAL SPECIFICATIONS
1.
Detergent drawer
2.Upper tray
3.Programme knob
4.Electronic display
5.Door
6.Cover of pump filter
7.
Transport safety
screw
8.Power cable
9.Discharging hose
10.Water inlet valve
Operating voltage / frequency
(V/Hz) (220-240) V ~/50Hz
Total current (A) 10
Water pressure (Mpa) Maximum: 1 Mpa
Minimum: 0.1 MPa
Total power (W) 2200
Maximum dry laundry capacity
(kg) 7
Wringing revolution (rev / min) 1600
Programme number 15
Dimensions
(Height x Width x Depth) (mm) 845 x 597 x 527
4
CHAPTER -1: TECHNICAL SPECIFICATIONS
SAFETY WARNINGS
Do not use multiple receptacles or extension cord.
Do not plug in damaged or torn plugs.
In case of a breakdown of power cable, contact the nearest
authorized service for replacing it.
Never pull the cable when unplugging. Grab the plug when
unplugging.
Do not plug-in or out the plug from the receptacle with wet hands
to prevent electric shock.
Never touch the machine with your wet, damped hand or foot.
Never open the detergent compartment when the appliance is
running.
Never force the door to open when the washing machine is
running.
Do not touch discharging hose and water during discharging as the
appliance may reach high temperatures when running.
In case of any breakdown, unplug the appliance firstly and then
turn the water faucet off. Do not attempt to repair by yourself and
consult authorized service.
Remember that packaging materials of your machine may be
dangerous for children. Keep the packaging materials in a place
where children cannot reach or dispose of them as to wasting
instructions.
Do not allow your children play with the washing machine which is
an electrically-driven appliance.
Keep your pets away from your machine.
Your machine should only be used by adults in line with the
information provided in this user’s manual.
Your machine is designed to be used domestically. Commercial
use will cause your warranty to be cancelled.
Anyone’s intervention to your machine except authorized services
in anyway will cause your warranty to be invalid.
Ideal operating temperature of your machine is 15-25 C.
Do not deploy your machine on carpet and suchlike grounds that
shall block ventilation of the base.
Do not keep inflammable liquids near your machine.
5
CHAPTER
2: BEFORE USING YOUR WASHING MACHINE
SAFETY WARNINGS
Before operating your washing machine, you should certainly remove
the transport safety screw on the rear side of the machine.
For this reason, transport safety screws shall be loosened by being
rotated in counter-clockwise using an appropriate wrench.
7
CHAPTER
3:
SETTING UP
REMOVING TRANSPORT SAFETY SCREWS
Transport screws shall be removed by pulling out.
Fit the plastic transport screw taps delivered in accessories bag to the
places where transport screws have been removed.
The transport safety screws should be stored to be used in case of a
transportation.
You should absolutely remove the transport screws of your machine
before the first usage. Faults occurring in the machines operated with
transport screw fitted shall be out of scope of warranty.
8
CHAPTER
-
3:
SETTING UP
REMOVING TRANSPORT SAFETY SCREWS
Electrical connection
Your washing machine is set to 220-240V and 50Hz.
Mains cord of your washing machine is equipped with a specific
grounded plug. This plug should always be inserted to a grounded
receptacle of 10 amperes. Fuse current value of the power line
connected to this plug should also be 10 amperes. If you don’t
have such a receptacle and fuse confirming with this, please have
it done by a qualified electrician.
We do not take the responsibility of the damages that occur
due to ungrounded usage.
Operating your machine under low voltage will cause the life cycle
of your machine to be reduced and its performance to be
restricted.
Water inlet connection
Your machine may have either a single inlet (cold) or double water
inlets (cold/hot) based on its specifications. White-capped hose
should be connected to cold water inlet and red-capped hose to
hot water inlet (applicable for machines with double water inlets).
To eliminate water leakages in points of contact, 1 or 2 nuts are
provided in the hose package (applicable for machines with double
water inlets). Fit these nuts to the ends of new water inlet hoses on
the side of faucet.
Connect the white-elbow end of the water inlet hoses to the white-
filtered water inlet valve on the rear side of the machine and the
red-elbow end to red-filtered one (applicable for machines with
double water inlets). Tighten plastic parts of the junctions using
your hand. In uncertain conditions, have the connection works be
done by a qualified plumber.
Flow of water with pressure of 0.1-1 Mpa will allow your machine to
operate more efficiently (0.1 Mpa pressure means that more than 8
litres of water will flow through a fully-tapped faucet per one
minute).
Ensure that points of contact do not leak by tapping the faucet
completely after carrying making the connections.
Ensure that new water inlet hoses are not folded, broken, crushed
or their dimensions are not altered.
Mount new water inlet hoses to a ¾ , threaded faucet.
If your machine has double hot water inlets, the temperature of hot
water inlet should be maximum 70°C.
10
CHAPTER
-
3:
SETTING UP
ELECTRICAL CONNECTION / WATER INLET CONNECTION
Water discharge connection
Ensure that water discharge hose is not folded, twisted, crushed or
elongated.
Water discharge hose can be fitted minimum 60 cm and maximum
100 cm above the ground.
The end of water discharge hose can be fitted to a specific
apparatus directly attached to dirty water discharge hole or outlet
joint of the basin elbow.
Never attempt to extend the water discharge hose by jointing.
Do not put discharging hose of your machine in a vessel, bucket or
sink.
11
CHAPTER
3:
SETTING UP
WATER INLET CONNECTION / WATER D SCHARGE
CONNECTION
Separate your laundries according to their types (cotton, synthetic,
sensitive, woollen, etc.), their temperatures (cold, 30°, 40°, 60°,
90°) and degree of contamination (slightly stained, stained, highly
stained).
Never wash your coloured and white laundries together.
Wash your coloured laundries separately in the first washing as
they may bleed.
Ensure that there are no metallic materials on your laundries or in
the pockets; if so, take them up.
WARNING: Faults that will emerge in case of penetration of
foreign substances into your machine are not included within the
scope of warranty.
Remove the metallic or plastic hooks of tulle curtains or curtains or
place them in a washing net or bag and then muzzle them.
Unzip and button up your laundries.
Reverse textiles such as pants, knitwear, t-shirt and sweat suit.
Wash socks, handkerchief and suchlike small laundries in a
washing net.
Normal washing
Maximum
washing
temperature is
90°C
Maximum
washing
temperature is
60°C
Maximum
washing
temperature is
30 °C
Hand washing No washing
12
CHAPTER
-
4: PRELIMINARY
PREPARATION FOR
LAUNDERING SEPARATING LAUNDRIES
Whitening
available
No whitening Ironing
temperature is
maximum 110°C
Ironing
temperature is
maximum 150°C
Ironing
temperature is
maximum 200°C
No ironing
Dry cleaning
available
No dry cleaning Leave on a flat
place
Hang when wet Dry by hanging Drying by twirling
is not allowed
Dry cleaning in
gas oil, pure
alcohol and R113
is allowed
Perchloroethylen
e R11, R113,
Petroleum
Perchlorinetyhlene
R11, R113, Gas
oil
13
CHAPTER
-
4: PRELIMINARY PREPARATION FOR
LAUNDERING SEPARATING LAUNDRIES
Open the door of your machine.
Spread your laundries in your machine.
Note: Maximum loading capacity may vary based on the
laundry type you will wash, degree of contamination and the
programme you have chosen. Do not exceed maximum dry
loading capacity indicated in the programme table for
washing programmes.
You can take the following table of weights as an example.
LAUNDRY TYPE
WEIGHT (gr)
Towel 200
Linen 500
Bathrobe 1200
Quilt cover 700
Pillow slip 200
Underwear 100
Tablecloth 250
Put the laundries separately.
Ensure that no laundry is stuck between the cover and bellow seal
when closing the door of your machine.
Push the door of your machine until hearing the locking sound to
close it.
Close the door of your machine properly, otherwise your machine
will not start the washing operation.
14
CHAPTER
-
4: PRELIMINARY PREPARATION FOR
LAUNDERING
PUTTING LAUNDRIES IN THE MACHINE
The amount of detergent you will put in your machine will depend on
the following criteria:
Your detergent utilization will be based on the degree of
contamination of your laundries. Do not prewash your less stained
laundries and put your slight amount of detergent in the 2 nd
compartment of the detergent drawer.
For your much stained laundries, select a programme including
prewashing, and put ¼ of the detergent you will put in the
detergent drawer in the 1st compartment of the detergent drawer
while putting the remaining ¾ of it into 2 nd compartment.
Use detergents produced for automatic washing machine in your
machine. The amount of detergent you will use for your laundries
is printed on the detergent package.
The higher the degree of hardness of the water the more detergent
you will use.
The amount of the detergent you will use will increase as the
amount of your laundries increase.
Put the softener in the softener compartment in the detergent
drawer. Do not exceed the MAX level. Otherwise, softener will flow
into washing water through flushing.
Softeners with high density are required to be thinned to a degree
before being put in the drawer. Because high-density softener will
clog the flush and avoid the flow of the softener.
You can use your liquid detergents in all programs without
prewashing. For this, fit liquid detergent level plate in the
accessories bag into 2nd compartment of the detergent drawer and
set the amount of liquid detergent according to the levels on this
plate. Remember to detach the liquid detergent plate.
15
CHAPTER
4: PRELIMINARY PREPARATION FOR
LAUNDERING
ADDING DETERGENT INTO MACHINE
16
CHAPTER 5: CONTROL PANEL
1-Detergent drawer
2-Programme knob
3-Electronic display and auxiliary functions
A. Prewashing compartment
B. Main washing compartment
C. Softener compartment
D. Siphon cover
E. Liquid level detergent plate
17
CHAPTER 5:
CONTROL PANEL
DETERGENT DRAWER
A
B
C
D
E
You may select the programme you like to wash your laundries
through programme knob. You may set the programme selection
operation by rotating the programme knob in both direction.
Ensure that the programme knob is exactly on the programme
you want to select.
18
CHAPTER 5:
CONTROL PANEL
PROGRAMME KNOB
1-Adjusting button for revolution speed
2-Adjusting button for temperature of washing water
3-Auxiliary function prewash
4-Auxiliary function for rapid wash
5-Auxiliary function for easy ironing
6-Auxiliary function for delay timer
7-Start/Pause button
8-Electronic display
On the electronic display, you may view washing water temperature,
wringing revolution speed of your machine, the amount time your
machine will continue washing, the auxiliary functions you have
selected and whether the door of your machine is locked or not.
Furthermore, electronic display will warn you by means of fault
symbols on the display when a fault occurs on your machine and notify
you of the completion of the washing programme by revealing
expression of “END” on the display as soon as the washing
programme you have selected has finished as well.
19
CHAPTER 5:
CONTROL PANEL
ELECTRONIC DISPLAY
Plug your machine in.
Open the water faucet.
Open the machine door.
Spread your laundries in your machine.
Push the door of your machine until hearing the locking sound to
close it.
Put detergent and softener in the detergent drawer.
Some water may be left in your machine due to experiments and tests
carried out during production. To dispose of this water, it is
recommended to perform the first washing operation in 1 st programme
and without laundry by inserting ½ scale of detergent in 2 nd
compartment of the detergent drawer.
Select the convenient programme for your laundries on the
programme table.
Before starting the programme, you can optionally select an auxiliary
function.
Press on the button of auxiliary function you like to select.
If auxiliary function symbol on electronic display flashes
continuously, the auxiliary function you have selected will be
activated.
If auxiliary function symbol on electronic display blinks, the
auxiliary function you have selected will not be activated.
Reason for non-activation:
-The auxiliary function you want to use in the washing programme you
have selected is not applicable.
-Your machine has passed over the stage, during which the auxiliary
function you like to select would be implemented.
-It is not compatible with an auxiliary function you have selected
previously.
20
CHAPTER 6: OPERATING YOUR MACHINE
First washing operation
Selecting programme
Auxiliary functions
Your machine features a half-load detection system. In case you put
approximately half or less amount of laundries of maximum laundry
capacity in your machine, your machine will run so as to save washing
time, water consumption and energy in some programmes (White
cotton 95°, Colorfast cotton 60°, Non colorfast cotton 40°). When half-
load function is active, the machine can complete the programme you
have set in a shorter time.
Detergent water in your machine will be circulated with 2 water
injection mechanisms and a mixing system via twinjet system.
Circulated detergent water will be injected over your laundries, which
allows a better washing performance.
Twinjet system will help you wash higher amount of laundries in a
shorter time with a better washing performance, guaranteeing less
energy and water consumption.
21
CHAPTER 6: OPERATING YOUR MACHINE
Half-load detection system
Twinjet system
CHAPTER 6: OPERATING YOUR MACHINE
PROGRAM TABLE
PROGRAMME TEMPERATURE
(°C)
PROGRAMME
DURATION
(MIN.)
DETERGENT
COMPARTMENT
MAXIMUM
AMOUNT OF
DRY
LAUNDRY
(kg)
LAUNDRY T
1-WHITE COTTON 95 190 2 7 Very dirty cotton and flax textiles. (U
tablecloth, towel (maximum 4 kg), b
2-COLORFAST
COTTON 60 180 2 7 Dirty cotton and flax textiles. (Under
towel (maximum 4 kg), bedclothes,
3-NON COLORFAST
COTTON 40 166 2 7 Dirty colour and flax textiles.
4-SYNTHETICS 60 101 2 3,5 Very dirty synthetic or synthetic-mix
shirts, blouses, synthetic-including t
5-SILK 30 91 2 2,5 Less dirty silk-mixed laundries with m
6-WOOL 40 78 2 2,5 Woollen laundries with machine was
7-RINSE - 36 - 7
If you want to additionally rinse your
of washing operation, you may use
of laundries.
8-SPIN - 15 - 7
If you want to additionally wring you
of washing operation, you may use
of laundries.
9-HAND WASH 30 60 2 2,5 Sensitive and woollen laundries with
recommended to be washed by han
10-SPORTS WEAR 30 74 2 3,5 Sportswear.
11-MIX WASH 30 103 2 3,5 Dirty cotton, synthetic, colour and fla
together.
12-SHIRTS/
BLOUSES 60 119 2 5 Dirty cotton, synthetic and synthetic
can be washed together.
13-HYGIENE 30 182 2 5
You can use this programme which
laundries at a low temperature such
colour, flax textiles and for baby clot
14-DAILY 60 min. 60 60 2 3 You can wash your dirty cotton, colo
in 60 minutes.
15-SUPER RAPID
12 min. 30 12 2 2
You can wash your dirty cotton, colo
minutes that is a short period.
Note: As the washing period is shor
is required to be used compared to
programme period will increase if yo
loading. You can open the door of y
the completion of washing operation
required to open the door of your ma
washing period.)
22
1-Revolution speed selection and auxiliary function of soaking
You can set the wringing revolution for your laundries via revolution
speed setting button. When you select a new
programme, the maximum
wringing revolution speed of the
programme you have selected will
be viewed on the display of
revolution speed.
You can gradually reduce the
revolution speed between cancel
wringing (--) options through the
maximum wringing revolution of
the programme selected by
pressing revolution speed setting
button.
If you have skipped the wringing revolution you want to set, you can
re-switch to the revolution by keeping the revolution setting button
pressed.
If you will not unload your laundries upon completion of the
programme and you want them not wrinkle in your machine, you can
use the auxiliary function of soaking.In programmes where auxiliary
function of soaking is applicable, it
may be activated by pressing on
revolution speed setting button
once more pursuant to stage of
cancel wringing (--). You can
conceive that it is active when
symbol flashes on electronic
display.
23
CHAPTER 6: OPERATING YOUR MACHINE
AUXILIARY FUNCTIONS
If this function is selected, your laundries will be soaked in the latest
rinsing water. When your machine soaks your laundries in the latest
rinsing water, symbol will blink on electronic display.
If you want to take your laundries out, press on “Start / Pause” button.
Your machine will empty the water in it and finish the programme
without wringing.
If you like to wring your laundries:
a) You can select wringing revolution by using the revolution
speed setting button when your machine is soaking your
laundries in the latest rinsing water. If you want to take your
laundries out, press on “Start / Pause” button. Your machine
will empty the water in it and finish the programme after
wringing your laundries through the wringing revolution you
have selected.
b) Switch the programme knob to 0. Select wringing programme
on programme knob. You can optionally reduce the revolution
speed. You can start your machine by pressing on Start/Pause
button. Your machine will finish the programme after wringing
your laundries in the wringing revolution you have selected.
24
CHAPTER 6: OPERATING YOUR MACHINE
AUXILIARY FUNCTIONS
2-Washing water temperature selection
You can select the washing water temperature with the washing water
temperature adjustment button.
Whenever you select a new
programme, the maximum
washing water temperature is
shown on the washing water
temperature display.
You can gradually decrease the
washing water temperature
between the maximum
temperature and cold washing (--)
by pressing washing water
temperature adjustment button.
If you have missed the washing water temperature you wanted, you
can return to the intended temperature by continuously pressing the
washing water temperature adjustment button.
25
CHAPTER 6: OPERATING YOUR MACHINE
AUXILIARY FUNCTIONS
3-Auxiliary function prewash
You can expose your very dirty
laundries to prewashing operation
prior to main washing by using
this auxiliary function. When using
this function, you should put
detergent in front washing
compartment of the detergent
drawer.
4-Auxiliary function for rapid wash
This auxiliary function will enable
the washing duration of your
laundries that are not very dirty to
be shortened. In case you put
half of or less than half of the
laundry capacity of the washing
programme you have selected in
your machine, your machine will
detect this event thanks to
automatic
Half-load detection system, and the programme you have selected will
wash your laundries in a shorter time to consume less energy and
water. If your machine detects half load, symbol will automatically
flash on electronic display. To cancel it, pressing on the auxiliary
function of quick washing for once will be enough. However, selection
of auxiliary function of quick washing is not possible in course of the
same washing operation.
5-Auxiliary function for easy ironing
You can enable your laundries to
be taken out less wrinkled as the
washing operation is completed
by employing this auxiliary
function.
26
CHAPTER 6: OPERATING YOUR MACHINE
AUXILIARY FUNCTIONS
6-Auxiliary function for delay timer
By using this auxiliary function,
you can let your machine start
washing after half an hour to 23
hours.
To use auxiliary function of delay timer:
- Press time delay button once.
- Expression of “0.5h” will appear on the display.
- Press on time delay button until the time, on which you want washing
operation to be started.
- To activate the time delay you have selected in the programme, you
may press on any auxiliary function button you like except
“Start/Pause” button.
Intervals of delay timer is half an hour for the first 2 hours, 1 hour for 3
hours to 23 hours.
If you have skipped the time delay you want to set, you can go back to
the time desired by keeping pressed on delay timer button.
If you want to cancel the delay timer, you are required to press the
delay timer button once.
To run delay timer function, your machine is required to be operated
by pressing on Start/Pause button. As soon as you start your machine,
the count down process will start on the electronic display based on
the delay period you have selected.
27
CHAPTER 6: OPERATING YOUR MACHINE
AUXILIARY FUNCTIONS
7-Anti-Allergic auxiliary function
In the programmes where this
auxiliary function is active, your
machine will perform an extra
rinsing operation on your
laundries prior to latest rinsing
operation.
Note: Anti-Allergic auxiliary function is selected automatically only in
Hygiene programme.
28
CHAPTER 6: OPERATING YOUR MACHINE
AUXILIARY FUNCTIONS
Start/Pause button
By pressing on Start/Pause
button, you may start the
programme you have selected,
suspend a running programme. If
you switch your machine to pause
mode, electronic display will blink.
When you start your machine, the following symbols for the
programmes you have selected will be available on electronic display.
- Temperature of washing water
- Revolution speed
- If you have selected, symbols of auxiliary functions
- Programme ending time or programme delay time based on your
selection
- Symbol of open or locked door
Note: Symbol for open door flashing on electronic display will go off
and symbol for locked door will flash approximately 1 minute after you
start your machine by pressing Start/pause button.
Open door Locked door
29
CHAPTER 6: OPERATING YOUR MACHINE
STARTING THE PROGRAMME
Laundry adding to / removing from the machine
If you want to add or remove laundries when your machine is running:
- Switch your machine to pause mode by pressing on Start/Pause
button.
- After a while, if you realize that symbol moves over electronic
display, this means that the door of your machine will be convenient
for opening. When you see symbol on electronic display, you can
either add or remove laundries after opening the machine door.
Note: If symbol blinks on the electronic display, it means that your
machine cannot carry out the operation of laundry adding or removing
as your machine has passed the steps in question.
- Upon completion of laundry adding or removing function, close the
door of your machine and press on Start/Pause button.
- Your machine will continue to wash after locking the door of your
machine.
- Symbol will flash on electronic display.
30
CHAPTER 6:
OPERATING YOUR MACHINE
ADDING/REMOVING LAUNDRY
Child lock
To avoid programme flow from being affected if programme knobs are
pressed or programme knob is turned when performing washing
operation in your machine, child lock is available. Child lock will be
activated in case pressed on both auxiliary functions of quick washing
and wrinkle removing at the same time in excess of 3 seconds.
Symbol will flash on the electronic display when activated.
If pressed any button while child lock is active, symbol will blink
on the electronic display.
When any of the programmes is running and child lock is active, if
another programme is selected after programme knob is switched to 0
position, the programme already running will resume.
To deactivate it, it will be sufficient to press on the same buttons for
more than 3 seconds. When child lock is deactivated, symbol on
the electronic display will go off.
31
CHAPTER 6:
OPERATING YOUR MACHINE
CHILD LOCK
Cancelling programme
If you want to cancel any programme running:
- Switch the programme knob to 0.
- Your machine will stop the washing operation and the programme will
be cancelled.
- To get rid of the water accumulated in the machine switch the
programme knob to any programme.
- Your machine will perform the necessary discharge operation and
cancel the programme.
- You can run your machine by selecting a new programme.
32
CHAPTER 6: OPERATING YOUR MACHINE
CANCELLING PROGRAMME
Finishing programme
- Your machine will stop by itself as soon as the programme you have
selected finishes.
-Expression of “END” will flash on the electronic display.
Note: Within 2 minutes after the programme has finished, your
machine will extinguish the electronic display to save energy. It will re-
flash when pressed on a button of any auxiliary function.
- If you see that the symbol indicating that the door can be opened
flashes on the electronic display, you can open the door of your
machine and remove the laundries.
- Leave the door of your machine open to allow the inner part of your
machine to dry after removing your laundries.
- Switch the programme knob to 0.
- Unplug your machine.
- Turn the water faucet off.
33
CHAPTER 6:
OPERATING YOUR MACHINE
FINISHING PROGRAMME
If symbol flashes on the electronic display:
- Water faucet may be closed. Check.
- Mains water may be cut-off. Check. If so, switch the programme knob
to position 0. You can select a programme and run your machine after
the mains water is supplied.
- Mains water pressure may be low. Check.
- Water inlet hose may be twisted. Check.
- Water inlet hose may be clogged. Clean water inlet hose filters. (*)
- Valve inlet filter may be clogged. Clean the valve inlet filters. (*)
(*) See the chapter regarding maintenance and cleaning of your
machine.
34
CHAPTER
-
7: ELECTRONIC DISPLAY WARNING SYMBOLS
WARNING OF WATER CUT-OFF / LOW MAINS WATER
PRESSURE
A filter system which avoids threads remaining from your laundries and
tiny materials from entering into the pump during water discharging
operation carried out by your machine after completing washing so
prolonging the lifecycle of your pump is available. It is recommended
that you clean your pump filter once in 2 months. To clean pump filter:
Depress the lug downwardly to uncover the pump section of the
toe board and pull it towards yourself and extract it.
Before opening the filter cover, settle a vessel in front of the filter
cover to prevent the water remained in the machine from flowing
on the ground.
Loosen the filter cover in counter-clockwise and then empty water.
Clean the foreign materials in the filter.
Check whether the pump rotates with your hands.
37
CHAPTER
8:
MAINTENANCE AND CLEANING OF YOUR
MACHINE / PUMP FILTER
After cleaning the filter, fit the filter cover by rotating it in clockwise.
Fit the pump section of the toe board.
Remember that water will leak if you do not fit the filter cover
properly.
You can use the pump section of the toe board for discharging
slight amount of water remaining in the pump of your machine.
WARNING!
As water in the pump may be hot, wait until it cools down.
38
CHAPTER
-
8:
MAINTENANCE AND CLEANING OF YOUR
MACHINE / PUMP FILTER
Your detergents may deposit residue in detergent drawer and housing
of detergent drawer over time. To clean the residue formed,
disassemble the detergent drawer in particular periods. To eject the
detergent drawer:
Pull the detergent drawer up to the end
Keep on pulling by depressing on the flush cover in the detergent
drawer already being pulled up to the end and then unsettle the
detergent drawer.
Flush it using a brush.
Collect residues in the housing of the detergent drawer without
dropping them inside the machine.
To assemble the detergent drawer after drying it using a towel or
dry cloth, resettle the detergent drawer by depressing on the flush
cover and fit it by pushing forward.
Do not wash your detergent drawer in dishwasher.
39
CHAPTER
-
8:
MAINTENANCE AND CLEANING OF YOUR
MACHINE / DETERGENT DRAWER
Siphon plug
Disassemble the detergent drawer. Disassemble the flush stopper and
clean the softener residues completely. Refit the flush stopper after
cleaning it. Check whether it has settled properly.
Body
Clean the outer body of your machine with warm water and a non-
inflammable cleaning agent that will not abrade the body of your
machine. After rinsing with some water, dry it using a soft and dry
cloth.
Drum
Do not leave metallic objects such as needles, paper clips, coins, etc.
in your machine. This objects will lead to formation of rust stains in the
drum. To clean such rust stains, use a non-chlorine cleaning agent
and follow the instructions of manufacturers of the cleaning agent.
Never use wire wool or similar hard objects for cleaning rust stains.
40
CHAPTER
-
8:
MAINTENANCE AND CLEANING OF YOUR
MACHINE / SIPHON PLUG / BODY / DRUM
Alcoholic drinks: Spotted area should initially be washed
using cold water, and then be wiped with glycerine and
water and rinsed with vinegar-mixed water.
Shoe shine: Spot should be rubbed out gently without
damaging the cloth and be scrubbed and rinsed with
detergent. If not removed, it should be scrubbed using the
mixture obtained by adding 1 scale of alcohol (96) into 2
scales of water, and then be washed with warm water.
Tea and coffee: Stretch the spotted area of your laundry
throughout the openning of a vessel, and pour hot water as
much as the type of your laundry can resist. In case the type
of your laundry permits, wash with bleacher.
Chocolate and cocoa: After submerging you laundries in
cold water and rubbing it using soap or detergent, wash it in
temperature that fabric type of your laundry can resist. In
case oil stain is still visible, wipe with oxygen water (3%).
Tomato paste: After rubbing out the dried substances
without damaging your laundry, submerge it in water for 30
minutes, and then scrub and wash it with detergent.
Bouillon-egg: Remove dried spot residues on your laundry,
and then wipe it with a sponge or soft cloth submerged in
cold water previously. Scrub with detergent, wash with
diluted bleacher.
Grease and oil stains: Firstly, wipe the residues. Scrub the
spot with detergent and wash it with warm soapy water.
Mustard: Apply glycerine on spotted area. Scrub with
detergent and wash. If spot cannot be removed, wipe with
alcohol. (For synthetic and colour fabrics, a mixture of 1
scale of alcohol and 2 scales of water should be used)
41
CHAPTER -9: PRACTICAL INFORMATION
Blood stain: Submerge your laundries in cold water for
30 minutes. If the stain is not removed, then submerge
in a mixture of water and ammoniac (3 spoons of
ammoniac in 4 litres of water) for 30 minutes.
Cream, ice cream and milk: Submerge your laundries
in cold water and scrub the spotted area with detergent.
If the spot is not removed, apply bleacher to the extent
suitable for your laundries. (Do not use bleacher for
colour laundries.)
Muff: Muff stains should be cleaned as soon as
possible. Stain should be washed with detergent water,
nevertheless if it cannot be removed, it should be wiped
with oxygen water (3%).
Ink: Subject the spotted area to running water and wait
until the flow of inked water ends. Then, wipe it with
lemon-added water and detergent, and wash it after
allowing 5 minutes.
Fruit: Stretch the spotted area of your laundry
throughout the opnening of a vessel, and pour cold
water on it. Do not pour hot water on the spot. Wipe with
cold water and apply glycerine. Allow 1-2 hours, wipe
with a few drops of white vinegar, and rinse it.
Grass stain: Wipe the stained part with detergent. If
type of your cloth permits bleacher using, wash with
bleacher. Wipe your woollen laundries with alcohol. (For
colour fabrics, a mixture of 1 scale of pure alcohol and 2
scales of water)
Oil paint: Spot should be removed by applying thinner
before drying. Then, it should be wiped with detergent
and washed.
Burn stain: If your laundry is suitable for applying
bleacher, you can add bleacher into washing water. For
woollen fabrics, a cloth previously submerged in oxygen
water should be covered over the stain, and it should be
ironed after putting a dry cloth on this cloth. It should be
washed after being rinsed properly.
42
CHAPTER -9: PRACTICAL INFORMATION
All repairing operations required for your machine should be carried
out by our authorised service. If your machine requires a repair or if
you cannot remove the fault by the help of the information provided as
follows:
Unplug your machine.
Turn the water faucet off.
Contact the nearest authorised service.
FAULT POSSIBLE CAUSE
REMOVING
METHODS
Your machine does
not start.
It is not plugged. Plug it.
Fuses out of order. Replace the fuses.
Electricity cut-off. Check mains power.
Start/pause button
not pressed. Press on start/pause
button.
Programme knob on
position 0.
Switch the
programme knob to
the desired position.
The machine door
not completely
closed.
Close the machine
door.
Your machine does
not intake water.
Your faucet turned
off. Turn your faucet on.
Water inlet hose may
be twisted. Check water inlet
hose.
Water inlet hose
clogged. Clean water inlet
hose filters. (*)
Valve inlet filter
clogged. Clean the valve inlet
filters. (*)
The machine door
not completely
closed.
Close the machine
door.
(*) See the chapter regarding maintenance and cleaning of your
machine.
43
CHAPTER -10: TROUBLESHOOTING
FAULT POSSIBLE CAUSE
REMOVING
METHODS
Excessive foam is
formed in the
detergent drawer.
Excessive amount of
detergent used.
Press on Start/Pause
button. To eliminate
foam formation, mix a
spoon of softener with
half litres of water,
and pour the mixture
in the detergent
drawer. After 5-10
minutes, press on
Start/Pause button
again. In next
washing operation,
decide the dose of
detergent as required.
Wrong detergent
used..
Use detergents
produced only for
automatic washing
machines in your
machine.
Unsatisfactory
washing result.
The contamination
degree of your
laundries does not
match the programme
you have chosen.
Select the programme
appropriate for the
contamination degree
of your laundries. (see
programme table)
Amount of detergent
used insufficient.
Adjust the amount of
detergent based on
the amount and
contamination degree
of your laundries.
Laundries in excess
of maximum capacity
put in your machine.
Load your machine
with laundries,
amount of which will
not exceed maximum
laundry capacity
45
CHAPTER
-
10: TROUBLESHOOTING
FAULT POSSIBLE CAUSE
REMOVING
METHODS
Unsatisfactory
washing result.
Water being hard.
(Dirty, hard, etc.)
Adjust the amount of
detergent based on
the instruction of
detergent
manufacturer.
Laundries distributed
in your machine non-
homogenously.
Spread your laundries
in the machine
properly and
homogeneously.
As soon as the
machine is loaded
with water, water
discharges.
The end of water
discharging hose is
too low for the
machine.
Set the water
discharging hose on
appropriate height.
(**)
No water appears in
the drum during
washing.
No fault. Water in the
non-visible part of the
drum. -
Laundries have
detergent residues on
them.
Non-dissolving
particles of some
detergents may
adhere to your
laundries as white
spots.
Perform an extra
rinsing by setting your
machine to “Rinsing”
programme, or clean
the spots using a
brush after your
laundries dries.
Grey spots appear on
the laundries.
The reason for this
spots may be oil,
cream or ointment.
Apply the maximum
amount of detergent
instructed by the
detergent
manufacturer in the
next washing
operation.
(**) See the chapter regarding installation of your machine.
46
CHAPTER -10: TROUBLESHOOTING

Produktspecifikationer

Varumärke: Vestfrost
Kategori: tvättmaskin
Modell: WMA 1400

Behöver du hjälp?

Om du behöver hjälp med Vestfrost WMA 1400 ställ en fråga nedan och andra användare kommer att svara dig


tvättmaskin Vestfrost Manualer

Vestfrost

Vestfrost VW 101442 Y Bruksanvisning

15 September 2024
Vestfrost

Vestfrost VWM 13149 BMP Bruksanvisning

5 September 2024
Vestfrost

Vestfrost VWMTD 101475 Bruksanvisning

3 September 2024
Vestfrost

Vestfrost VWM 12148 BM Bruksanvisning

3 September 2024
Vestfrost

Vestfrost VWM 11147 Bruksanvisning

3 September 2024
Vestfrost

Vestfrost VWM 20147 Bruksanvisning

2 September 2024
Vestfrost

Vestfrost VWMTD 201475 Bruksanvisning

29 Augusti 2024
Vestfrost

Vestfrost VWM 10147 Bruksanvisning

29 Augusti 2024
Vestfrost

Vestfrost WMA 1400 Bruksanvisning

28 Augusti 2024
Vestfrost

Vestfrost VWM 23149 BMP Bruksanvisning

27 Augusti 2024

tvättmaskin Manualer

Nyaste tvättmaskin Manualer

Friac

Friac wa 1231 e Bruksanvisning

9 April 2025
Zanussi-electrolux

Zanussi-electrolux fjs 1486 x Bruksanvisning

9 April 2025
Miele

Miele WSE383 WCS Bruksanvisning

9 April 2025
AEG Electrolux

AEG Electrolux 74604 oko lavamat Bruksanvisning

8 April 2025
Electrolux

Electrolux ewc 1350 Bruksanvisning

8 April 2025
Hotpoint

Hotpoint NDB 10748 WA Bruksanvisning

8 April 2025
Whirlpool

Whirlpool FFB 7269 BV Bruksanvisning

8 April 2025
Whirlpool

Whirlpool FFWDD 107448 WBS Bruksanvisning

8 April 2025
Whirlpool

Whirlpool TDLR 6261BS Bruksanvisning

8 April 2025
Ariston

Ariston AVL89 Bruksanvisning

7 April 2025