Vevor Thickness Planer M1B-LS-3301 Bruksanvisning

Vevor Inte kategoriserad Thickness Planer M1B-LS-3301

Läs nedan 📖 manual på svenska för Vevor Thickness Planer M1B-LS-3301 (9 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/9
Thickness Planer
Manual
Please keep this manual for future reference
SAFETY INSTRUCTIONS
IMPORTANT: Carefully read the instructions in this manual as well as the general
safety instructions before using this tool.
Keep the packaging material out of the reach of children -- The risk of suffocation.
WARNING! Always take basic safety precautions when using power tools to safeguard
against the risk of fire electric shock and /or personal injury. 、
1. For safe operation. We recommend that you take appropriate measures for the
protection of hearing if the sound pressure of 85dB (A) is exceeded
2. Keep the work area clean. Cluttered work areas increase the risk of accidents and
injuries.
3. Keep the workplace environment safe. Do not use power tools in damp or wet areas.
Do not expose power tools to rain. Make sure the work area is well lit. Do not use power
tools in explosive environments, such as in the vicinity of flammable liquids , gases, or dust.
4. Protect against the risk of electric shock. Avoid body contact with earthed surfaces,
Such as pipes, radiators, cookers, and refrigerators.
5. Keep children at a safe distance. Do not allow onlookers to touch the tool or the
extension cord. Onlookers should be kept away from the work area.
6. Put away tools that are not being used. When not in use, story the tool in a dry place
out of the reach of children.
7. Do not force the too l. The tool does the job better and is safer when used at the rate for
which it was designed.
8. Use the correct machine. Do not force small machines or accessories to perform jobs
that require a powerful machine. Use tools only for their intended purpose. (do not use a
circular saw to cut tree branches).
9. Wear suitable clothing. Do not wear loose clothing or jewellery. they can be caught in
moving parts. Non-slip shoes are recommended when working outdoors. Wear a hair net if
you have long hair.
10. Wear safety glasses. Wear a dust mask if the work generates dust.
11. Be careful with the cord. Never carry the tool by the cord. Do not pull the power cord to
disconnect the plug from the mains socket. Keep the power cord away from heat, oil, and
sharp edges.
12. Secure the workpiece. Secure the workpiece with a clamp, vice, or clips. This is safer
than using your hands and means you have both hands free to operate the tool.
13. Do not overreach. Always maintain a firm footing and good balance.
14. Maintain the tool in good care. Keep cutting tools sharp and clean for better, safer work.
Follow the instructions for lubricating and for the replacement accessories. Check power
cords regularly. If damaged, they must be replaced at an authorized service centre. Check
extension cords at regular intervals and replace them if they are damaged. Keep the
handles clean, dry, and free from oil and grease.
15. Always unplug the power cord. when the tool is not being used, and before carrying
out service work or changing accessories, such as blades, bits, or discs.
16 Remove adjuster keys/spanners and other assembling tools. Remove adjuster
keys/spanners and other assembling tools before starting the power tool.
17. Avoid accidental starting. Never carry a power tool with your finger on the switch when
it is connected to the mains. Make sure the power switch is in the OFF position before
plugging in the power cord.
18. If using the tool outdoors. only use an extension cord approved for outdoor use.
19. Stay alert. Always be careful when using the equipment. Use your common sense, d o
not use the tool if you are tired.
20. Connect dust extraction equipment. If dust extraction and dust collection equipment
are provided. This should be connected and used correctly.
21. Check for damaged parts. If a guard or some other part has been damaged, check
carefully before using the tool to ensure that it will operate correctly and as intended. Make
sure that moving parts are properly adjusted and do not jam and that no parts are incorrectly
fitted or damaged. Check for any other factors that could influence functionality. Guards or
other parts that are damaged must be repaired or replaced by an authorised service centre.
Unless otherwise specified in these instructions. If the power switch does not work, it must
be replaced by an authorised s ervice centre. Do not use the tool if it cannot be switched on
and off using the power switch.
WARNING! The use of accessories or attachments other than those recommended in these
operating instructions can result in personal injury.
Repairs must only be carried out by qualified personnel. This power tool has been
manufactured in compliance with current safety standards and requirements. Repair may only
be carried out by qualified personnel using identical spare parts. Failure to carry out repairs
Correctly can result in the risk of personal injury/death or material damage.
NOTE: A temporary voltage drop can occur when starting the machine. Which could affect
other equipment. If the main supp ly’s impedance Zmax. is lower than 0.206ohms, this kind
of interference is common. Contact your electricity supplier for more information.
IMPORTANT SAFETY INSTRUCTIONS
1. Wear safety glasses, Don’t cram wood into the outfeed side.
2. Before use, check that all screw connections are properly tightened.
3. Do not force the tool. Let the feed mechanism do the work. Never insert objects or body
parts in the outfeed.
4. Check regularly that the rubber roller and iron roller are clean. If the rollers are
contaminated the workpiece will not infeed correctly- risk of personal injury.
5. Do not machine workpieces with many knots or sprigs.
6. The operating position is in front of the machine. Stand by the side of the infeed table.
7. Remove any nails, screws, and other metal objects from the workpiece before machining.
8. Check that the blades are correctly installed.
9. Handle the knife blades with care--risk of personal injury and/or damage to property.
10. Never start to planer until the blade holder has reached full speed.
11. Never use blunt blades-risk of kickback.
12. Always replace or sharpen both blades at the same time. Both blades must be of the
same size and weight.
13. Never insert your fingers or other body parts in the chip outlet--risk of personal injury--
DANGER.
14. Pls check the recoil claw is in the correct position.
15. If the infeed wood is not smooth, pls don’t force the wood, check if the machine ha s some
problems.

Produktspecifikationer

Varumärke: Vevor
Kategori: Inte kategoriserad
Modell: Thickness Planer M1B-LS-3301

Behöver du hjälp?

Om du behöver hjälp med Vevor Thickness Planer M1B-LS-3301 ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Vevor Manualer

Vevor

Vevor Thickness Planer M1B-LS-3301 Bruksanvisning

21 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024