Vimar ELVOX 433RAD.T Bruksanvisning

Vimar Radio ELVOX 433RAD.T

Läs nedan 📖 manual på svenska för Vimar ELVOX 433RAD.T (6 sidor) i kategorin Radio. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/6

Installer manual

433RAD.T

Plug-in 2-channel receiver 12/24 V 433 MHz

433RAD.T

WARNINGS FOR THE INSTALLER

Carefully read all instructions and warnings in this document as they provide important information regarding safety during installation, operation and

maintenance.

After removing the packing, check the condition of the device. The packaging must not be left within reach of children as it is potentially harmful. Installation

must be carried out in accordance with national safety regulations.

This device must only be used for the purpose for which it was expressly designed, e.g. for automation systems for gates and garage doors.

Any other use is considered improper and therefore hazardous. The manufacturer declines all liability for damage caused by improper, incorrect or un-

reasonable use.

Always disconnect the device from the power supply at the main switch before performing maintenance or cleaning procedures.

In the event of faults and/or malfunctions, disconnect the power supply immediately by means of the switch and do not tamper with any part. For repairs,

contact only a service centre authorized by the manufacturer. Failure to observe the above may impair equipment safety.

All devices within the installation must be used exclusively for the purpose for which they are intended.

This document must always be kept with all paperwork regarding the installation.

Directive 2002/96/EC (WEEE).

The crossed out wheelie bin symbol marked on the equipment indicates that, at the end of its useful working life, the product must be handled sepa-

rately from household refuse and must therefore be assigned to a di󰀨erentiated collection centre for electrical and electronic equipment or returned

to the dealer upon purchase of a new, equivalent item of equipment.

The user is responsible for ensuring the appliance is disposed of through the correct channels when no longer in service. Proper sorted waste collection

for subsequent recycling, processing and environmentally conscious disposal of the old appliance helps to prevent any possible negative impact on the

environment and human health while promoting the practice of recycling materials used in manufacture. For more detailed information regarding available

waste collection systems, contact your local waste disposal service or the shop from which the appliance was purchased.

Risks associated with substances considered hazardous (WEEE).

According to the new WEEE Directive, substances which for some time have been widely used in electrical and electronic equipment are considered

hazardous to human heath and the environment. Proper sorted waste collection for subsequent recycling, processing and environmentally conscious dis-

posal of the old equipment helps to prevent any possible negative impact on the environment and human health while promoting the practice of recycling

materials used in manufacture.

REACH (EU) Regulation no. 1907/2006 – Art.33.

The product may contain traces of lead.

Contents: ............................................................................................................................................................................................Page

1 - Product features .............................................................................................................................................................................................................. 1

2 - Power supply ................................................................................................................................................................................................................... 1

3 - Connecting the aerial ...................................................................................................................................................................................................... 1

4 - Saving the remote controls.............................................................................................................................................................................................. 2

5 - Saving remote controls via radio .................................................................................................................................................................................... 2

6 - Deleting a single remote control ...................................................................................................................................................................................... 3

7 - Deleting all the remote controls ....................................................................................................................................................................................... 3

8 - LED signals in normal operation ..................................................................................................................................................................................... 3