Viotek GN34CW Bruksanvisning

Viotek Övervaka GN34CW

Läs nedan 📖 manual på svenska för Viotek GN34CW (13 sidor) i kategorin Övervaka. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/13
CURVED GAMING MONITOR
USER MANUAL
GN 34C
VIOTEK
Read and observe the following warnings and informaon below.
Safety Precauons and Maintenance
1. Before cleaning, always unplug your monitor. It is recommended to use dry
cloth or lightly damp cloth to clean your monitor. Dry cloth is, however, the
safest. If using damp cloth, wait for your monitor to completely dry before
plugging it in again.
2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your
monitor.
3. This monitor features venlaon openings on the back of the unit. Avoid
blocking these openings to prevent the monitor from overheang.
4. Avoid placing this monitor near any heat sources e.g: portable heaters or
heang vents, as this may cause damage to your monitor.
5. Do not spray cleaner and or any kind of liquid directly onto the monitor's screen
or any part of the monitor.
6. Do not insert anything into any part of the monitor especially the venlaon
openings.
7. Always make sure your monitor is placed on a secure, level surface to
prevent it from falling and sustaining damage.
8. Unplug your monitor during any extended periods of non-use.
9. Do not place heavy items on the monitor or monitor cables.
10. Do not aempt to dissemble the monitor or remove parts from monitor.
Any disassembly or modificaon etc. not performed by an authorized
technician can result in damage to the monitor and/or possible exposure to
high voltage electricity which may lead to serious injury or death.
Viotek shall not be held responsible for injury or damage of products or persons
due to failure to adhere to the aforemenoned precauons or any others noted
hereaer.
All specificaons and informaons are subject to change without noce.
-1-
DVI Connector HDMI Connector DP Connector Audio Input AC IN Connector
Box Contents
1x Monitor
1x Power Cable (AC 100-240V 50/60Hz)
1x HDMI Cable
1x User manual
Basic Setup
1. Insert one end of the HDMI video cable into your PC's graphics card. DVI or DP
(display port) may also be used. These cables are not included.
Note: For opmal refresh rate (or "performance") at 100Hz, it is recommended to
use a DP (display port) or DVI-D dual link cable with the monitor's corresponding
connector
2. Connect the other end of the video cable to the corresponding connector on
your monitor. See the image below.
3. Connect the power cable to your monitor then connect the other end to your
power source such as a wall outlet or surge protector. It is recommended to
use a surge protector with adequate voltage if a wall outlet cannot be reached
directly.
4. Locate the power buon on the monitor and press it to turn the monitor on.
Note: If you cannot locate the power buon, please refer to the Control Panel
Secon on the next page.
AMD FreeSync™
If desired, you can use the monitor's AMD FreeSync™ feature. The feature itself is
on by default. In order to use this feature, please note you must have hardware
with AMD FreeSync™ capability, a DP, and the latest graphic drivers. To use this
feature, connect the appropriate cable to the DP connectors on both the computer
and the monitor. Aer connecng, you will receive a prompt to enable the feature
on your computer.
All specificaons and informaons are subject to change without noce.
-2-

Produktspecifikationer

Varumärke: Viotek
Kategori: Övervaka
Modell: GN34CW

Behöver du hjälp?

Om du behöver hjälp med Viotek GN34CW ställ en fråga nedan och andra användare kommer att svara dig




Övervaka Viotek Manualer

Viotek

Viotek NB32CW Bruksanvisning

19 September 2024
Viotek

Viotek GN32LD Bruksanvisning

19 September 2024
Viotek

Viotek GN32C Bruksanvisning

19 September 2024
Viotek

Viotek GN35LD Bruksanvisning

19 September 2024
Viotek

Viotek GFV24CB2 Bruksanvisning

19 September 2024
Viotek

Viotek NB27C Bruksanvisning

19 September 2024
Viotek

Viotek GN34CW Bruksanvisning

19 September 2024

Övervaka Manualer

Nyaste Övervaka Manualer