Vitek VTC-PIRC4 Bruksanvisning

Läs nedan 📖 manual på svenska för Vitek VTC-PIRC4 (8 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
VITEK
VITEK
FEATURES
• 1/2.9” 2.1 Megapixel Sony® Exmor™ Progressive Scan
CMOS Sensor
• 30fps live view @ 1920 x 1080p
• HD-TVI / HD-CVI / AHD / 960H CVBS Video Output
(Selectable)
• 3.7mm Pinhole Lens Included
• 2D-DNR Noise Reduction
• Digital Wide Dynamic Range (D-WDR)
• 16:9 Video format
• Supports Up The COAX Control (CoC)
• Over 1500’ HD Video Transmission (Depending on cable
characteristics and integrity)
• 12VDC Operation
• 3 Year Warranty
VTC-PIRC4
2.1 Megapixel 4-IN-1 HD-TVI
/ AHD / CVI / CVBS Covert
Pinhole PIR Camera
2
Safety Precaution
CAUTION: TO REDUCE THE RISK OF ELECTICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
To prevent electrical shock and risk of fire hazards, do not expose this unit
to rain or moisture and only use specified power source..
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Main power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power interruptions, it is
recommended that the device be powered from an uninterruptible power supply
(UPS).
The symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock.
3
Power & Video Connections
Monitor
Video
12VDC Power
Connect the HD-TVI Video or AHD/CVBS video connector to a BNC
patch cable, then to a DVR. Next connect the power connector to a
12VDC power adaptor.
Installation
1) Disconnect power before installation.
2) Confirm proper 12VDC power supply is used to prevent damage to
the camera.
3) Do not use in an environment beyond the boundaries of the
specifications.
Video Output Mode Switch:
Select the desired video mode using the dip switches
contained within the on-cable Output Mode Switch as follows:
ON
1 2
ON
1 2
HD-TVI
ON
1 2
CVBS
ON
1 2
CVI
ON
1 2
AHD

Produktspecifikationer

Varumärke: Vitek
Kategori: Inte kategoriserad
Modell: VTC-PIRC4

Behöver du hjälp?

Om du behöver hjälp med Vitek VTC-PIRC4 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Vitek Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer