Vogels PFW 6850 Bruksanvisning

Vogels Wandstöd PFW 6850

Läs nedan 📖 manual på svenska för Vogels PFW 6850 (7 sidor) i kategorin Wandstöd. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
www.vogels.com
95 31-00 16-Z00- 02
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide dInstallation, Installatie gids
PFW6850
www.vogels.com
95 31-0 06-Z0 0-02
1/2/14mm
M5 x 16mm M5 x 25mm M6 x 16mm M6 x 25mm M8 x 16mm M8 x 25mm 5/16” x 35/16
2.5mm
2.5mm
10mm Template
M10 x 60mm 4mm
x4
x4
x4 x4 x4 x4 x4 x4 x4 x8 x4
1/4/ 6.5mm
(Wood Only)
A2A1
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide dInstallation, Installatie gids
PFW6850
Remove the plastic hole covers from the upper and lower
plates. Loosen the (2) set screws on the plate using the
2.5mm allen key supplied. Reposition the upper and lower
pivot rods to mate to either the center or right side pivot
receiver holes, push the upper and lower plate fully on to the
rods, and re-tighten the set screws. Reinstall the side plate
with the eight flat head screws and confirm they are secure.
Reinstall the round plastic hole covers.
Prior to initial step 1 of the installation, your PFW6850 can
easily have the mainswing left pivot point of the main swing
out arm moved to either the center, left or right of the mount
by simply placing the mount on a flat surface and removing
the eight flat head screws, then separating the upper and
lower wall plates.
Included components
Required for installation
Pivot
Set Screw
Locations
Set Screw
Locations
www.vogels.com
95 31-0 06-Z0 0-02
43
21
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide dInstallation, Installatie gids
PFW6850
To ease the installation process you have the option to
remove the wide front plate and mounting brackets by simply
removing the three M5 x 10mm flat head screws, holding
the plate assembly to the swing out arm assembly and set-
ting them aside.
Take the thick cardboard mounting template supplied and
place the it over the mounting studs with the screen center
facing up. Confirm that the template is level horizontally and
that the wall place outline is to the center of your desired
height.
Using a suitable stud-finder device for frame walls, mark the
position of the stud centers.
Measure the desired height of the center of the screen and
mark it.
Using a 1/4 drill bit, drill pilot holes minimum 2 (50mm)
deep into the four marked mounting points on the wall
surface. For solid concrete wall construction, the supplied
plastic wedge anchors are recommend to be used with the
5/16 x 3 lag bolt and washers supplied.
1/4 / 6. m
Wood Only

Produktspecifikationer

Varumärke: Vogels
Kategori: Wandstöd
Modell: PFW 6850

Behöver du hjälp?

Om du behöver hjälp med Vogels PFW 6850 ställ en fråga nedan och andra användare kommer att svara dig




Wandstöd Vogels Manualer

Wandstöd Manualer

Nyaste Wandstöd Manualer