Vonroc CD803AA Bruksanvisning

Vonroc Slipmaskin CD803AA

Läs nedan 📖 manual på svenska för Vonroc CD803AA (24 sidor) i kategorin Slipmaskin. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/24

CHARGER

CD802AA

Original Instructions 03

Übersetzung Der Originalbetriebsanleitung 07

Vertaling van de oorspronkelijke gebruiksaanwijzing

Traduction de la notice originale 16

WWW.VONROC.COM2

WWW.VONROC.COM

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional

safety warnings and the instructions. Failure to

follow the safety warnings and the instructions may

result in electric shock, ﬁre and/or serious injury.

Save the safety warnings and the instructions for

future reference.

The following symbols are used in the user

manual or on the product:

Read the user manual.

Denotes risk of personal injury, loss of life

or damage to the tool in case of nonobser-

vance of the instructions in this manual.

Risk of electric shock.

Indoor use only.

Class II machine - Double insulation -

You don’t need any earthed plug.

Time-lag miniature fuse-link.

Do not dispose of the product in unsuitable

containers.

The product is in accordance with the

applicable safety standards in the European

directives.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all

instructions. Failure to follow the warnings

and instructions may result in electric

shock, ﬁre and/or serious injury.

Save all warnings and instructions for future

reference. The term “power tool” in the warnings

refers to your mains-operated (corded) power tool

or battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

b) Do not operate power tools in explosive at-

mospheres, such as in the presence of ﬂamma-

ble liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while ope-

rating a power tool. Distractions can cause you

to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiﬁed plugs and matching outlets

will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase

the risk of electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk

of electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inﬂuence of drugs, alcohol or medica-

tion. A moment of inattention while operating

power tools may result in serious personal

injury.

b) Use personal protective equipment. Always

wear eye protection. Protective equipment

such as dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appropriate

conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking up

or carrying the tool. Carrying power tools with

your ﬁnger on the switch or energising power

tools that have the switch on invites accidents.

Produktspecifikationer

Varumärke:	Vonroc
Kategori:	Slipmaskin
Modell:	CD803AA
Enhetsplacering:	Ingebouwd
Typ av operation:	Touch
Färg på produkten:	Zwart
Antal effektnivåer:	9
Inbyggd display:	Nee
Vikt:	8000 g
Bredd:	580 mm
Djup:	510 mm
Höjd:	55 mm
Barnlås:	Ja
Förpackningens vikt:	8900 g
Förpackningens bredd:	555 mm
Djuppackning:	655 mm
Förpackningshöjd:	125 mm
Typ av material (överst):	Glas
Brännare/kokzonseffekt 2:	750 \ 2200 W
Brännare/kokzonseffekt 3:	1100 W
Brännare/kokzonseffekt 1:	1200 W
Antal brännare/kokzoner:	4 zone(s)
Typ av häll:	Keramisch
Brännare/kokzon typ 1:	Sudderen
Brännare/kokzon typ 2:	Extra groot
Typ av brännare/kokzon 3:	Groot
Antal elektroniska kokzoner:	4 zone(s)
Kontrollposition:	Voorkant
Tillgångar:	6900 W
Nuvarande:	32 A
Restvärmeindikator:	Ja
Typ av brännare/kokzon 4:	Regulier
Brännare/kokzonseffekt 4:	1500 W
Strömkälla brännare/kokzon 1:	Electrisch
Strömkälla brännare/kokzon 2:	Electrisch
Strömkälla brännare/kokzon 3:	Electrisch
Strömkälla för brännare/kokzon 4:	Electrisch
Kookzone 3 boost:	2200 W
Placera brännare/kokzon 1:	Links achter
Diameter brännare/kokzon 1:	140 mm
Placera brännare/kokzon 2:	Links voor
Brännare/kokzons diameter 2:	120 \ 210 mm
Placera brännare/kokzon 3:	Rechts achter
Placera brännare/kokzon 4:	Rechts voor
Brännare/kokzons diameter 4:	160 mm
Kokzon 1 form:	Rond
Kokzon 2 form:	Rond
Kokzon 3 form:	Rond
Kokzon 4 form:	Rond
AC-ingångsspänning:	380-415 V
AC-ingångsfrekvens:	50 Hz
Kokzon 3 storlek (BxD):	140 x 250 mm